ilikericeOriginal postsavannah, ga · Nov 26, 2012#1Ok, I believe I have decided to keep my body kit for reasons that I just like the way it looks so much...
I need help finding a good stainless steal (or something that wont rust) idea for quick release for your bumpers. I wanna remove my retainers and clips that hold the bumper on because they are taking too much of a beating from clipping cones during autocross.
I will be putting these on the front and the rear bumpers. If anyone as any experience with a certain name brand or type, please share your thoughts and how to order them.
Just wanna start this thread to see other ideas out there and share some info. If you are unsure of what I am talking about, here a few pics I found that look like good candidates, but unsure of quality and function.
Cali Yaris, if you see this and have access to a dealer that you feel are reputable. I will buy from you.
3 attachments not included in this copy
Replies 27
1.5Tampa · Nov 26, 2012#2ilikericeThread startersavannah, ga · Nov 26, 2012#3wow, thanks phil. As much as I hate passwordjdm and their over priced jdm stuff, not a bad deal.
1.5Tampa · Nov 26, 2012#4they typically have decent quality. At least for Hondas I have gone to them a lot
cali yarisCanoga Park, CA · Nov 26, 2012#5I don't like that design. I wouldn't trust a body panel to a glorified rubber band.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Jason@SportsCarDebary, FL · Nov 26, 2012#6Picture not included in this copy
😈
1.5Tampa · Nov 26, 2012#7Zip ties! Lol
ilikericeThread startersavannah, ga · Nov 26, 2012#8Thats funny jeff. Looks like my setup currently on my right front bumper.
Hey cali, any recommendations? As far as other reliable vendors? I like that first pic design
YaristeveLos Angeles · Nov 27, 2012#9Why not quarter turn Dzus (sp?) fasteners?
mr_milesPortland, OR · Nov 27, 2012#10 Originally Posted by
Jason@SportsCar ↑ Picture not included in this copy
😈
I swear that wasnt me 🙄
mazillaSan Jacinto California · Nov 27, 2012#11 Originally Posted by
cali yaris ↑ I don't like that design. I wouldn't trust a body panel to a glorified rubber band.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
I like the top set.
ilikericeThread startersavannah, ga · Jan 4, 2013#12Ok, so I was tired of my bumper having a huge gap so I been trying to figure out some way to use latches to keep my bumper on. I went to home depot and Lowes looking for some stainless steel latches. The only one I found that was half way decent were ones that looked similar to the 3rd that Cali Yaris posted. The only catch was that they are not stainless steel and are prone to rust over time, which I didn't want. I thought about using some clear primer, but I knew it would rub off in time due to metal on metal rubbing.
SO, I opted for the PasswordJDM.com style. I will have to say I am very impressed with these. The only downfall I see is trying to get a good measurement. I need just a little bit more tension on it. my next rear bumper will definitely fit better now that I know the length apart they need to be. The rubber band is very strong and seems very durable.
And now for the pictures
4 attachments not included in this copy
AstromanWenatchee, WA · Jan 5, 2013#13Here are mine, found them at home depot. I found them as hasps and they still look the same as the day I put them on in September. Sorry these are the best pics I have. I will try and get some closer shots after I get the car back. She's getting some repairs done and some new paint and other goodies I'll reveal later 😁
Picture not included in this copy
Picture not included in this copy
ilikericeThread startersavannah, ga · Jan 5, 2013#14Yea. I checked home depot. The only thing they had that resemble those were gold plated. Im very happy with these those. Go well with my color scheme. Need to purchase another set for the front.
I would have been more inclined to look for more if u had shown me these before i installed these though.
djct_wattThailand · Jan 5, 2013#15Please excuse me for sounding extremely ignorant... I think I'm getting old and recent trends may be getting the best of me, but isn't your bumper held on by the clips and supports behind the bumper?
Are these decorative pieces or are they functional?
The last question would be regarding the rear bumper. I can definitely understand how a quick release would be extremely useful for the front bumper (give the tiny hood and engine bay). Why would you need easy access for the other end?
Again, apologies, as this is completely new for me and I really honestly have no idea what the heck they are for. I've seen hood pins, and those make a lot of sense (for some applications), but I'm at a total loss for these quick releases.
WeeYariGeorgetown, Ontario, Canada · Jan 5, 2013#162 things;
1) Anyone who has removed their bumpers has run a good chance of breaking some of the retaining clips. This results in sloppy fitment when reinstalled.
2) Many aftermarket bumpers have poor fitment and leave gaps when installed.
In both cases, these clips will tighten up that plastic to metal seam.
djct_wattThailand · Jan 5, 2013#17ah ok, makes sense. Thanks!
1.5Tampa · Jan 5, 2013#18 Originally Posted by
djct_watt ↑ Please excuse me for sounding extremely ignorant... I think I'm getting old and recent trends may be getting the best of me, but isn't your bumper held on by the clips and supports behind the bumper?
Are these decorative pieces or are they functional?
The last question would be regarding the rear bumper. I can definitely understand how a quick release would be extremely useful for the front bumper (give the tiny hood and engine bay). Why would you need easy access for the other end?
Again, apologies, as this is completely new for me and I really honestly have no idea what the heck they are for. I've seen hood pins, and those make a lot of sense (for some applications), but I'm at a total loss for these quick releases.
These are functional. They are used to hold the bumper on since once your remove the bumper you typically break most of the clips. Yes they have a visual appeal as well. In addition, if someone is running into fitment issue where the tires rub on the fender, you may have to take those bolts off and then these come in handy as they replace those original bolts holding the bumper to fender from inside the lip of the wheel well. This can be front or back
Nice Work Derrick, you may have convinced me to finally get a set.
ilikericeThread startersavannah, ga · Jan 5, 2013#19Yea. Mine are totally functional also. I autocross at least once a month. I am not perfect so i hit the occasional cone at 30mph which i have replace my front bumper clips about 3 times too many already. My rear bumper is fiberglass and the oem clips are not used but the bumper has broken where i drill the screws to fastened the quarter panel and bumper. Its been sagging for a long time. Front bumper is held on with zip ties right now but i will fix that also when i order more from passwordjdm.
Also cars need to quickly remove bumpers to get on trailers. And to perform quick repairs on the fly at the track between runs. Just a few more reasons for quick release latches. They got popular in the car scene when drifters would remove their bumpers at drift events to practice.
AstromanWenatchee, WA · Jan 5, 2013#20Yup all reasons posted are true. My mistake I found mine at Lowe's and were called hasps. I have replica bumpers so fitment wasn't OEM and I discovered a broken clip on the rear from backing into another car 4 years ago. I really wanted to put my new rear on and already removed the old bumper so I was hell bent anyway. I had a old siphon mag issue with the tein yaris which has had clips which is where I got the idea. Also the shop that put the front on had glued my front on and the glue kept breaking and looked and fit terrible. The clips made it nice and flush plus looks good. Also it is a good conversation starter and I can talk about the yaris and what amazing potential the car has.
Jason@SportsCarDebary, FL · Feb 21, 2013#21ilikericeThread startersavannah, ga · Feb 21, 2013#22Hmm.. I like that.. $171... ouch.. Also those screws are not long enough to reach the other side of the bracket thru the fiberglass rear bumper. Also alot more cutting of the rear wheel quarter panel to fit that bracket behind it.. I am happy with my current setup but when the money really starts flowing, I will definitly be looking into this.
Jason@SportsCarDebary, FL · Feb 21, 2013#23 Originally Posted by
ilikerice ↑ Hmm.. I like that.. $171... ouch.. Also those screws are not long enough to reach the other side of the bracket thru the fiberglass rear bumper. Also alot more cutting of the rear wheel quarter panel to fit that bracket behind it.. I am happy with my current setup but when the money really starts flowing, I will definitly be looking into this.
Its easy to get longer screws, but yes, you would be cutting a lot of material away.
racerbLeland, NC · Feb 21, 2013#24Check with Pegasus Racing Parts, they always did us right, especially back in our Weber Carburator days. (Fuel/Air Jets)
https://www.pegasusautoracing.com/ad...egoryID=HARDQR Oh yeah, the rubber T-Handle type work great for holding trunks and hatches shut. Really good for Enduro Races, when you have a fuel cell with no external quick fill set up!!
racerb 👍
ilikericeThread startersavannah, ga · Feb 21, 2013#25I like how all these show up after i already got the jdmpassword ones. I still like my pick. I need 2 more sets so i can swap my rear bumper on the fly for autocross.
TickleTimeTimArkansas · Feb 21, 2013#26thats a pretty good idea. also makes a body kit more desirable since you can easily fix the gaps. good find.
DJYojimboChicago · Feb 23, 2013#27Hey Garm do u sell the clips that u had pictures for on Microimage? I want to get these for my stock bumpers for my 2012 SE trim for some reason the front bumper tends to pop out every once in a while by the headlights. I should post pictures soon to show what i'm talking about
Pur_BluEast Bay, Castro Valley · Feb 23, 2013#28I have these...
I use Terry Race Springs, and just do a google search to find them, shouldn't be more then 15bucks for a pack of 2