Yarisworld Archive

Voxx Racing 17"

13 posts · 2,829 views

TrYarisOriginal postTrois-Rivières, Qc · Nov 16, 2012#1
I have those wheels for the next summer, they are 17" Voxx racing 225/45zr17
and I wonder if they will fit on my yaris 2008 HB :o would I need to buy spacers because they are 215? 🤷
Picture not included in this copy

1 attachment not included in this copy

Replies 12

ilikericesavannah, ga · Nov 16, 2012#2
doubt it. I run 225/45/15.. only rubs in really tight turns.. I am also really low on coilovers.
1.5Tampa · Nov 16, 2012#3
If you're dropped that could rub but why not just get smaller tires?
kimonaHuntington Bch, CA · Nov 16, 2012#4
What is the offset?
TrYarisThread starterTrois-Rivières, Qc · Nov 16, 2012#5
Originally Posted by kimona ↑
What is the offset?
I think its 17x7
ilikericesavannah, ga · Nov 16, 2012#6
offset is the ET.. usually +42 or maybe even +45
TrYarisThread starterTrois-Rivières, Qc · Nov 16, 2012#7
215/45zr17
yarisugiハワイ · Nov 16, 2012#8
lol
1.5Tampa · Nov 16, 2012#9
TrYaris turn the wheel around and look at the inside. You should see etched into one of the spokes, a little box with a number in it. To the left or right you will see the letters ET. That is the distance in mm that the mounting point of the wheel is spaced from the geometric center of the barrell.

You keep giving us
1. the rim diameter in inches= 17
2. the rim width in inches= 7
3. the tire width in mm= 215
4. the tire profile which is a percentage of the width= 45% (45% X 215MM = 96.75MM)
TrYarisThread starterTrois-Rivières, Qc · Nov 16, 2012#10
ET 42, And sorry its 225 not 215..
1.5Tampa · Nov 16, 2012#11
17x7 +42 should be ok but 225 is a fat tire so you may get some rubbing especially when turning.

I would get a smaller tire for a 7" wheel but that is up to you.

Are you at stock height? If you are then you might not have any rubbing at all.
TrYarisThread starterTrois-Rivières, Qc · Nov 16, 2012#12
I'm totally stock, I didnt change anything on my yaris exept that I have a ShortRam
1.5Tampa · Nov 16, 2012#13
should be fine then. test fit them