Yarisworld Archive

Replacement Map Light Switch?

9 posts · 7,372 views

Meteorite_MartyOriginal postWaterloo, Ontario, Canada · Nov 7, 2012#1
Seems my switch is burned out on one of the map lights. It isn't the bulb. Swapped good switch to the "bad" side and it worked.

Now I have to replace the bad switch. The little white switch is marked "MS-010A" and is Japan Miyama Miniature Pushbutton Switch MS-010A.

http://www.federalcomponent.com/pdf/MS-010.pdf

Does anyone know where I can source one of these, or an equivilant? Is there a Toyota part number for it? I don't want to replace the whole map light housing when only the switch is bad.

Replies 8

Meteorite_MartyThread starterWaterloo, Ontario, Canada · Nov 7, 2012#2
Picture

1 attachment not included in this copy

CTScottUSA, CT · Nov 7, 2012#3
Toyota only sells the entire fixture. Many parts like that switch are custom, making it hard to find them or an alternate. Your best bet is probably to find a replacement assembly from a junk yard.
Meteorite_MartyThread starterWaterloo, Ontario, Canada · Nov 7, 2012#4
If this helps, the map light assembly is 81260-52030-b0

Just need the little white switch though.
Meteorite_MartyThread starterWaterloo, Ontario, Canada · Nov 7, 2012#5
Originally Posted by CTScott ↑
Toyota only sells the entire fixture. Many parts like that switch are custom, making it hard to find them or an alternate. Your best bet is probably to find a replacement assembly from a junk yard.
I was thinking that might be my only hope. Mine was replaced by the dealer 4 years ago. Time flies! I suppose the warranty on the part is 1-year?
Meteorite_MartyThread starterWaterloo, Ontario, Canada · Nov 7, 2012#6
Seems like going rate is over $60.... yikes!!!!
Meteorite_MartyThread starterWaterloo, Ontario, Canada · Nov 8, 2012#7
Anyone got a partially broken or damaged map light assembly lying around, and could extract a white switch from it? Let me know.
chris johnsontoronto · Nov 12, 2013#8
I had the same problem today. Toyota Canada only sells the entire assembly for $130. The manufacturer of the switch only sells in batches of 1000. So, I carefully dismantled the broken switch and re-assembled it, replaced it in the lesser-used housing, and it works! (for now)
yariseggvvtiCali · Nov 12, 2013#9
Try electrical store. They might have it. The best way is bring the old one with you and have them match one.