corman007Original postIreland · Oct 16, 2012#1Hi all,
I just had a rear wheel bearing replaced and now find that when i depress the brake pedal the side lights come on and the display in the car dims, i don't know how replacing a bearing would affect this (i know the abs is built into the bearing somehow) any ideas much appreciated.
Regards james.
Replies 3
corman007Thread starterIreland · Oct 16, 2012#2sorry its a 2003 yaris terra 5 dr model - european
CTScottUSA, CT · Oct 16, 2012#3Sounds like they pinched a wire or two in the process of working on the car and bridged the stop light wiring with the turn signal wiring. I would start with following the wires from tail lights as far as you can and inspect them for damage.
Geoff PeaceWigan · Oct 17, 2012#4 Originally Posted by
CTScott ↑ Sounds like they pinched a wire or two in the process of working on the car and bridged the stop light wiring with the turn signal wiring. I would start with following the wires from tail lights as far as you can and inspect them for damage.
Agree fully with the above. Also check the earth connections for the rear lights. I cannot think why they would be disconnected or damaged during replacing a wheel bearing but if the connection is poor or non existant the power will try to find a route to earth through other bulbs.
Regards Geoff Peace.