Yarisworld Archive

Head gasket

13 posts · 9,508 views

thefallsOriginal postSunny place · Oct 7, 2012#1
Hi,looking for metal head gasket?
Heard about cometic,anyone has any idea who sells them?

Whats the stock head gasket thickness?

And what is the thickness of the cometic head gasket?

Many thanks.

Replies 12

scioncrewHB · Oct 7, 2012#2
man i dont know if they even make one for the 1NZFE motor. Ive always used stock head gasket on my street car builds. give them a call or email them. here is a link http://www.cometic.com/contact.aspx
thefallsThread starterSunny place · Oct 7, 2012#3
Thanks for the reply.Will definitely contact them.
cali yarisCanoga Park, CA · Oct 7, 2012#4
I don't think Cometic has a yaris/1NZ gasket, but maybe. Toyota isn't listed on their site.

I use a stock gasket with no issues.
thefallsThread starterSunny place · Oct 8, 2012#5
In fact a friend is having some issues. Most probably his head is warped,car is drinking coolant.So he will have to re-surface the head and go for thicker head gasket.

Thats why i am looking for thicker metal head gasket.

I suppose we could use two stock metal head gasket,as it is aftermarket metal ones are multi-layered.

Opinions?

Thanks.
cali yarisCanoga Park, CA · Oct 8, 2012#6
I've never done this, but I know people successfully double up gaskets, especially metal ones like the OEM Toyota gasket. Pretty much any shop can make you one as well.
Jason@SportsCarDebary, FL · Oct 8, 2012#7
Originally Posted by thefalls ↑
In fact a friend is having some issues. Most probably his head is warped,car is drinking coolant.So he will have to re-surface the head and go for thicker head gasket.

Thats why i am looking for thicker metal head gasket.

I suppose we could use two stock metal head gasket,as it is aftermarket metal ones are multi-layered.

Opinions?

Thanks.
Why do you want a thicker one? There is space to safely deck the head and use a stock gasket, we have done it on a number of engines.
thefallsThread starterSunny place · Oct 8, 2012#8
Thanks Jason and Garm,this is the exact information i was looking. I figured that finally we may have to use two stock head gaskets but i didnt know that i can deck the head and still use the stock head gasket.
We learn something new everyday!

Many thanks!
Jason@SportsCarDebary, FL · Oct 8, 2012#9
Originally Posted by thefalls ↑
Thanks Jason and Garm,this is the exact information i was looking. I figured that finally we may have to use two stock head gaskets but i didnt know that i can deck the head and still use the stock head gasket.
We learn something new everyday!

Many thanks!
I don't know what the limit is (I cant give you the specific number) but we had our engine guy deck it just for the purpose of a compression increase, so we took a good bit off. Just cleaning up after an overheat should be a minimal repair.

If his is to far gone I have a spare head, less than 1500 miles all stock and complete, (just wanted a spare when we were doing R&D with the early cams, but never used it).
thefallsThread starterSunny place · Oct 9, 2012#10
Many thanks for the help,but i am mile and miles away from you.And shipping is a real killer.
As one problems dont come in ones,now i just discovered that we have the know issue of leaky head gasket with oil traces by the block/head and timing chain area.
Also around the block/head area all around.

But it doesnt change the oil level,but it needs to be looks at :(
cali yarisCanoga Park, CA · Nov 10, 2012#12
shipping is a real killer.
For a head? Not so bad.
jetblastNor Cal · Nov 12, 2012#13
I have a former racing source that probably would design something. All depends on how busy he is with bigger stuff.