Yarisworld Archive

2012 Fog relay

71 posts · 66,473 views · page 1 of 2

Absolutely Red 12Original postYour moms house. · Sep 26, 2012#1
I cant seem to find the fog relay plug.
Remember his is a 2012, all previous diagrams dont mean squat!!

BTW, my 2012 already has a fog light loom under the hood!!

Replies 70

CTScottUSA, CT · Sep 27, 2012#2
There is none on the 2012. The fog light relay is built into the body ECU.

To see if it is enabled on your car, you can jump pin 3 to pin 4 on the headlight switch connector D106. Pin 3 will be brown or green (depending on if you have the OEM alarm) and Pin 4 will be green.

Jump those wires and have the ignition on and the headlight switch in the low beam position. If the fogs don't light then the relay is not in there. For the 2nd gens for instance the integrated relay for the power windows and locks is not present on cars that were not built with them (and there are different part number for the body ECU).



Picture not included in this copy

1 attachment not included in this copy

Absolutely Red 12Thread starterYour moms house. · Sep 27, 2012#3
Originally Posted by CTScott ↑
There is none on the 2012. The fog light relay is built into the body ECU.

To see if it is enabled on your car, you can jump pin 3 to pin 4 on the headlight switch connector D106. Pin 3 will be brown or green (depending on if you have the OEM alarm) and Pin 4 will be green.

Jump those wires and have the ignition on and the headlight switch in the low beam position. If the fogs don't light then the relay is not in there. For the 2nd gens for instance the integrated relay for the power windows and locks is not present on cars that were not built with them (and there are different part number for the body ECU).



Attachment 48579
CTScott

Thank you, I was getting that impression from reading the Prius C forums.

The fog harness behind the bumper is already there, as is the fog fuse.

I do not have the OEM alarm, so brown to green?
What wire is the parking light, if I cheese to not use low beam?
Is the illustration pin side, or wire side?


Again, thank you!👍
CTScottUSA, CT · Sep 27, 2012#4
Originally Posted by Absolutely Red 12 ↑
CTScott

Thank you, I was getting that impression from reading the Prius C forums.

The fog harness behind the bumper is already there, as is the fog fuse.

I do not have the OEM alarm, so brown to green?
What wire is the parking light, if I cheese to not use low beam?
Is the illustration pin side, or wire side?


Again, thank you!👍
If you have the alarm or DRLs - Green to brown.
If you have neither alarm nor DRLs - Green to Green.


The connector illustration is looking at the pin side of the connector.


For the parking light turn on, it is a bit more complicated for the 2012, as for the ones with DRLs, that functionality is built into the body ECU, so it will be completely different for DRL vs. non-DRL Yaris. I would start with seeing if it works at all on a non-factory equipped car.
Absolutely Red 12Thread starterYour moms house. · Sep 27, 2012#5
Originally Posted by CTScott ↑
If you have the alarm or DRLs - Green to brown.
If you have neither alarm nor DRLs - Green to Green.


The connector illustration is looking at the pin side of the connector.


For the parking light turn on, it is a bit more complicated for the 2012, as for the ones with DRLs, that functionality is built into the body ECU, so it will be completely different for DRL vs. non-DRL Yaris. I would start with seeing if it works at all on a non-factory equipped car.

Got it, will let you know tonight.

Thanks again!
Absolutely Red 12Thread starterYour moms house. · Sep 27, 2012#6
Pins 3&4 are violet, and green.
Jumping them does not turn the fogs on.
Using DVOM shows no voltage coming from either wire when turning on the
headlights.


Picture not included in this copy
Absolutely Red 12Thread starterYour moms house. · Sep 27, 2012#7
OK. DISREGARD my last post.
I forgot to turn on the ignition DOOOOHHH!

Jumping the purple and green wires at 3&4 made the fogs go on!!
The light on the dash also works!!

Time to get some taps, and wire the switch.


Now taking this one step further, how do I make it work with park, low, high.

CT Scott, thank you for the help, also in advance!!
CTScottUSA, CT · Sep 27, 2012#8
Originally Posted by Absolutely Red 12 ↑
OK. DISREGARD my last post.
I forgot to turn on the ignition DOOOOHHH!

Jumping the purple and green wires at 3&4 made the fogs go on!!
The light on the dash also works!!

Time to get some taps, and wire the switch.


Now taking this one step further, how do I make it work with park, low, high.

CT Scott, thank you for the help, also in advance!!
Do you have DRLs?
Absolutely Red 12Thread starterYour moms house. · Sep 27, 2012#9
Originally Posted by CTScott ↑
Do you have DRLs?
No DRLs.

Also now using a PIAA switch, as the cheap Chinese Toyota looking switch would not allow the fogs to turn off.

New switch is a 3 wire, internal lighting, when on. It also allows the dash icon to turn on!!
CTScottUSA, CT · Sep 27, 2012#10
Originally Posted by Absolutely Red 12 ↑
No DRLs.

Also now using a PIAA switch, as the cheap Chinese Toyota looking switch would not allow the fogs to turn off.

New switch is a 3 wire, internal lighting, when on. It also allows the dash icon to turn on!!
You should use a four, not three wire switch. The illumination should be isolated from the switching.

I just noticed that for both the DRL and non-DRL Yaris the fog relay coil is tied directly to the body ECU internally in such a way that it prevents the fogs from turning on except when it decides it is OK to. You would have to either do some surgery on the body ECU or use an external relay and rewire the fogs to it to override that behavior.
Absolutely Red 12Thread starterYour moms house. · Sep 27, 2012#11
Originally Posted by CTScott ↑
You should use a four, not three wire switch. The illumination should be isolated from the switching.

I just noticed that for both the DRL and non-DRL Yaris the fog relay coil is tied directly to the body ECU internally in such a way that it prevents the fogs from turning on except when it decides it is OK to. You would have to either do some surgery on the body ECU or use an external relay and rewire the fogs to it to override that behavior.
Ok, Ill leave it like this for now.
The Chinese switch was a four, with isolated illumination. Wouldn't allow the fogs to turn off!! The three wire works as expected, Ill get another 4 wire to avoid future issues.

Thanks a bunch.🤘
CTScottUSA, CT · Sep 27, 2012#12
Originally Posted by Absolutely Red 12 ↑
Ok, Ill leave it like this for now.
The Chinese switch was a four, with isolated illumination. Wouldn't allow the fogs to turn off!! The three wire works as expected, Ill get another 4 wire to avoid future issues.

Thanks a bunch.🤘
The one that came with the kit has some internal circuitry which ties the switching and illumination together. What you want is one where the two are truly isolated.
Absolutely Red 12Thread starterYour moms house. · Sep 27, 2012#13
Philips CrystalVision Ultra 9003, and H11 in the Headlights and fogs.

Picture not included in this copy
Absolutely Red 12Thread starterYour moms house. · Sep 29, 2012#14
Originally Posted by CTScott ↑
You should use a four, not three wire switch. The illumination should be isolated from the switching.

I just noticed that for both the DRL and non-DRL Yaris the fog relay coil is tied directly to the body ECU internally in such a way that it prevents the fogs from turning on except when it decides it is OK to. You would have to either do some surgery on the body ECU or use an external relay and rewire the fogs to it to override that behavior.

Scott,

The green wire is the trigger when the head lights lights go on, the violet loops to the other row. Looks like the Violet triggers the fog realy, and dash light.
Im having difficulty finding the wire that is live when the park/low/high get selected. 😕

Do you have a wiring diagram for 2012??
CTScottUSA, CT · Sep 29, 2012#15
Originally Posted by Absolutely Red 12 ↑
Scott,

The green wire is the trigger when the head lights lights go on, the violet loops to the other row. Looks like the Violet triggers the fog realy, and dash light.
Im having difficulty finding the wire that is live when the park/low/high get selected. 😕

Do you have a wiring diagram for 2012??
The green wire is "activated" by the Body ECU, when it decided that it is OK to let the user turn the fogs on. Once it is active, shorting it ground (which is what the violet wire is tied to) at that time allows power to flow through the fog relay coil.

The blue wire in pin 18 is the one that is activated when the park or headlights are on. It is 12V with them off and then switches to ground with them on.
ShroomsterOrlando · Jan 13, 2013#16
So dumb question, and sorry to necro-bump, but all I need to do in theory is get the foglight kit, plug the lights into the pre-existing harnesses, then tap the two wires to the switch and install it in place of a delete plug?
CTScottUSA, CT · Jan 13, 2013#17
Originally Posted by Shroomster ↑
So dumb question, and sorry to necro-bump, but all I need to do in theory is get the foglight kit, plug the lights into the pre-existing harnesses, then tap the two wires to the switch and install it in place of a delete plug?
Correct
ShroomsterOrlando · Jan 14, 2013#18
Originally Posted by CTScott ↑
Correct
Woot! Time to see what kind of deal I can get on an o.e.m kit from dealer through my job!
06yarishbottawa, ontario, canada · Jan 16, 2013#19
Originally Posted by CTScott ↑
There is none on the 2012. The fog light relay is built into the body ECU.

To see if it is enabled on your car, you can jump pin 3 to pin 4 on the headlight switch connector D106. Pin 3 will be brown or green (depending on if you have the OEM alarm) and Pin 4 will be green.

Jump those wires and have the ignition on and the headlight switch in the low beam position. If the fogs don't light then the relay is not in there. For the 2nd gens for instance the integrated relay for the power windows and locks is not present on cars that were not built with them (and there are different part number for the body ECU).



Attachment 48579
Sorry stupid question: what do you mean by jump pin 3 to pin 4? Is that mean you connect the pin 3 to pin 4? 🙂 just got a 2012 yaris hb le and want to add the fog light on. Thanks
CTScottUSA, CT · Jan 16, 2013#20
Originally Posted by 06yarishb ↑
Sorry stupid question: what do you mean by jump pin 3 to pin 4? Is that mean you connect the pin 3 to pin 4? 🙂 just got a 2012 yaris hb le and want to add the fog light on. Thanks
With the 2012's to add fogs you simply install and connect the foglights on the front bumper and then install a switch that connects the wires in pins 3 and 4 together (i.e. jumps one wire to the other).
Absolutely Red 12Thread starterYour moms house. · Jan 16, 2013#21
Originally Posted by 06yarishb ↑
Sorry stupid question: what do you mean by jump pin 3 to pin 4? Is that mean you connect the pin 3 to pin 4? 🙂 just got a 2012 yaris hb le and want to add the fog light on. Thanks
Remove the lower steering column cover.
Locate the connector shown in my picutre.
Tap the fog switch wires, one to the violet, and the other to the green wire.
The two by themselves.

You can alternatively not use a switch, and jump the two wires, they will go on, and stay on when the headlights are turned on.

Picture not included in this copy
ShroomsterOrlando · Jan 25, 2013#22
Looks like I will be getting a micro image fog light kit......Toyota fog kit is warranty replace only. PLUS get this: parts department showed me on screen that mid level LE trim does not/can not have fog lights installed from factory or aftermarket.....lmao......he sighed and laughed too, as that is what the screen inventory stated.....
oohcoryChicago, IL · Feb 23, 2013#23
Originally Posted by Shroomster ↑
Looks like I will be getting a micro image fog light kit......Toyota fog kit is warranty replace only. PLUS get this: parts department showed me on screen that mid level LE trim does not/can not have fog lights installed from factory or aftermarket.....lmao......he sighed and laughed too, as that is what the screen inventory stated.....
has anyone with a 12' LE tried installing aftermarket fogs?
CTScottUSA, CT · Feb 23, 2013#24
Originally Posted by oohcory ↑
has anyone with a 12' LE tried installing aftermarket fogs?
Yes. Besides Absolutely_Red, a few others have as well.
Absolutely Red 12Thread starterYour moms house. · Feb 23, 2013#25
Originally Posted by oohcory ↑
has anyone with a 12' LE tried installing aftermarket fogs?
All that is needed from the kits, are the lamps, fillers, and switch.
2012s have the wiring preinstalled.
As CTSott mentioned, the relay is integrated into the BCM.
You dont even need a switch!! If you want the fogs to always be on with the headlamps.


The lamps, if anyone is interested, are Camry interchange part numbers!!
oohcoryChicago, IL · Mar 22, 2013#26
Originally Posted by Absolutely Red 12 ↑
Remove the lower steering column cover.
Locate the connector shown in my picutre.
Tap the fog switch wires, one to the violet, and the other to the green wire.
The two by themselves.

You can alternatively not use a switch, and jump the two wires, they will go on, and stay on when the headlights are turned on.

Picture not included in this copy
I for the life of me cannot find this. All that's below my steering column is an airbag? I'm a noob, little help please?
CTScottUSA, CT · Mar 22, 2013#27
Originally Posted by oohcory ↑
I for the life of me cannot find this. All that's below my steering column is an airbag? I'm a noob, little help please?
You are looking too far down. You need to remove the lower steering column cover to find that connector (which is at the base of the headlight switch).
oohcoryChicago, IL · Mar 23, 2013#28
Originally Posted by CTScott ↑
You are looking too far down. You need to remove the lower steering column cover to find that connector (which is at the base of the headlight switch).
Oh ok, is there a trick to taking it off? Or is it just the three screws and pop her off
CTScottUSA, CT · Mar 23, 2013#29
Originally Posted by oohcory ↑
Oh ok, is there a trick to taking it off? Or is it just the three screws and pop her off
Just the three screws and squeeze it by the seam to separate it.
oohcoryChicago, IL · Mar 23, 2013#30
Originally Posted by CTScott ↑
Just the three screws and squeeze it by the seam to separate it.
Thanks! I jumped it, everything's golden!
Picture not included in this copy
geodedRomania · Sep 1, 2013#31
Until after someone installed fog lights on 2012 Toyota Yaris? Pictures?
geodedRomania · Sep 2, 2013#32
fog fuse

1 attachment not included in this copy

geodedRomania · Sep 2, 2013#33
@Absolutely Red 12, You understand that you are including in FR FOG fuse?
geodedRomania · May 16, 2014#34
Originally Posted by Absolutely Red 12 ↑
OK. DISREGARD my last post.
I forgot to turn on the ignition DOOOOHHH!

Jumping the purple and green wires at 3&4 made the fogs go on!!
The light on the dash also works!!

Time to get some taps, and wire the switch.


Now taking this one step further, how do I make it work with park, low, high.

CT Scott, thank you for the help, also in advance!!

I'm sorry, but, I do not work. I have Yaris 1.4 d4d, 1ND-TV, I put the fuse, I jump the wires at 3 & 4 made ​​the fogs not go on! I started the engine and the fogs not go on. What can I do? Any idea?

3 attachments not included in this copy

CTScottUSA, CT · May 16, 2014#35
Jumping brown in 3 to green in 4 is correct for your TMMF built Yaris. The headlight switch must also be on and in low beam mode for the front fogs to light.
geodedRomania · May 16, 2014#36
Yes, I did but it does not work.
geodedRomania · May 16, 2014#37
maybe my car is different. what can I do?
geodedRomania · May 16, 2014#38
but two? making pin 2?
CTScottUSA, CT · May 16, 2014#39
Originally Posted by geoded ↑
but two? making pin 2?
Pin 2 (light green wire) is for the rear fog light.

Do you have a multimeter? If so, measure the voltage on pin 4 with the jumper disconnected. If you do not see +12V on pin 4 with the jumper removed, then your body ECU may not have the front fog relay built inside of it.
geodedRomania · May 16, 2014#40
Tomorrow I will check the voltage on pin 4. I do not think it's possible that my car not have the front fog relay built inside of it.
geodedRomania · May 16, 2014#41
I will check the voltage on pin 4 with the jumper removed, engine start and the headlight switch must also be on and in low beam mode for the front fogs to light, and the fuse front fog is on you place.
CTScottUSA, CT · May 16, 2014#42
Originally Posted by geoded ↑
I will check the voltage on pin 4 with the jumper removed, engine start and the headlight switch must also be on and in low beam mode for the front fogs to light, and the fuse front fog is on you place.
Yes
geodedRomania · May 16, 2014#43
Today I noticed something during testing. With the engine running, with brown for 3 to 4 green jump, and the headlight switch is on in position mode, the rear fogs can be on to light.
CTScottUSA, CT · May 16, 2014#44
Originally Posted by geoded ↑
Today I noticed something during testing. With the engine running, with brown for 3 to 4 green jump, and the headlight switch is on in position mode, the rear fogs can be on to light.
That makes sense as the rear fogs automatically light when the front fogs are on.
geodedRomania · May 17, 2014#45
Today I tested, the values ​​are:
9.31 V with the engine running
8.53 V with the engine off

3 attachments not included in this copy

geodedRomania · May 17, 2014#46
I found 12v at pin 17 :-) but not 4

1 attachment not included in this copy

CTScottUSA, CT · May 17, 2014#47
Pin 17 is the high beam flash signal to the body ECU.

No voltage on pin 4 says that the other end of that wire is not connected to what it should be.

I just noticed that the European Yaris wiring diagram does not show the front fog light relay as being within the body ECU. I am not sure where it is located, but you should see a small plastic box with two relay sockets in it that looks like this:

Picture not included in this copy

1 attachment not included in this copy

geodedRomania · May 17, 2014#48
the input voltage pin 4, but not 12 v, there exists 9.31 volts. Where should I look? Have a photo helpful?
CTScottUSA, CT · May 17, 2014#49
Originally Posted by geoded ↑
the input voltage pin 4, but not 12 v, there exists 9.31 volts. Where should I look? Have a photo helpful?
I don't know where it is. I only have the wiring diagram, which do not show the location.
geodedRomania · May 17, 2014#50
perhaps he should be in the area

1 attachment not included in this copy