Yarisworld Archive

How do you remove the alternator?

6 posts · 5,715 views

47_MasoN_47Original postNorthwest Alabama · Sep 24, 2012#1
I have an 09 sedan. The factory service manual just says to remove the bolts and pull it out. I removed the top 2 bolts and the bottom bolt, but it just pivots. Is there something special you have to do on the 09?

Replies 5

CTScottUSA, CT · Sep 24, 2012#2
No. It is just a case of it being super tight into that bottom area. You may have to at most pry it out a bit, but typically pivoting it all the way down frees it.
fnkngrvIn The Hotbox · Sep 24, 2012#3
and swear a lot
FidelioLos Angeles, CA · Sep 24, 2012#4
Careful with the Cam Sensor above the alternator. I damaged mine not knowing it was there using a long screw driver tightening the belt slack. :-(
fnkngrvIn The Hotbox · Sep 24, 2012#5
Originally Posted by Fidelio ↑
Careful with the Cam Sensor above the alternator. I damaged mine not knowing it was there using a long screw driver tightening the belt slack. :-(

yyyyeeeeeaaaahhhhhh! One of the guys helping me with my motor swap back in May/June did the same thing whilst getting the alt in the right spot 😢 That was an expensive trip.
47_MasoN_47Thread starterNorthwest Alabama · Sep 25, 2012#6
I ended up having to pull on it while rotating it forward and backward. PITA. CT you weren't kidding about it being tight!

We definitely were referring to the Yaris engine compartment using derogatory language.