Yarisworld Archive

Blitz Oil Cap o-ring

10 posts · 3,878 views

47_MasoN_47Original postNorthwest Alabama · Sep 24, 2012#1
Haven't got an answer at MI yet, so I thought I'd check with you guys.

Is the o-ring on the Blitz oil cap supposed to come off so easy? It seems like when you remove the cap it will just fall off into the engine bay somewhere. The factory oil cap has the O-ring built into the cap or it's held in somehow. The one on my Blitz cap just sits in a track with seemingly nothing to prevent it from just falling off at any given time.

Picture not included in this copy

Replies 9

47_MasoN_47Thread starterNorthwest Alabama · Sep 24, 2012#2
Come on I've seen these in engine bay pics around here. Someone should be able to tell me if this is the way it's supposed to be and how you are supposed to deal with it.
CTScottUSA, CT · Sep 24, 2012#3
I have the TRD one and the o-ring is tight around the base.
47_MasoN_47Thread starterNorthwest Alabama · Sep 24, 2012#4
Should/could I just glue the o-ring into that track that it sits in? It's weird that it's setup that way. Doesn't really make any sense.
TRDMartyCorona CA · Sep 24, 2012#5
Originally Posted by 47_MasoN_47 ↑
Should/could I just glue the o-ring into that track that it sits in? It's weird that it's setup that way. Doesn't really make any sense.
You have 2 options
1) Remove the o-ring off of your original oil cap and install on Blitz cap
2) Remove the o-ring off of your original oil cap and measure size then
look up McMaster Carr website catalog under o-rings (BUNA-N type) and order.

Its to bad you're not closer to me cause I have EVERY size o-ring there is
in my test lab at work (Aerospace) and I would gladly donate a couple to you.

Best of luck
cali yarisCanoga Park, CA · Sep 24, 2012#6
Franklin's Hardware has all kinds of O-rings in their plumbing department. You probably have a hardware store near you as well?
47_MasoN_47Thread starterNorthwest Alabama · Sep 24, 2012#7
So getting an O ring that fits snugly in there is the best way to do it?
cali yarisCanoga Park, CA · Sep 25, 2012#8
^ I would say so, yes. I think it's supposed to fit better!
Bluevitz-rsOshawa, Ontario, Canada · Sep 25, 2012#9
or clean it up and try gluing it in with some black RTV silicon
47_MasoN_47Thread starterNorthwest Alabama · Sep 25, 2012#10
Ok thanks :) I'll see what I can find.