Yarisworld Archive

2008 5 door Yaris 1.3 TR rear hub replacement.

5 posts · 6,582 views

JOHNVWOriginal postMerseyside UK · Sep 15, 2012#1
Hi,
I have a 2008 5 door Yaris 1.3 TR hatchback with 42, 000 miles on the clock.
I have recently noticed a droning noise which seems to be coming from the o/s/r of the car, I jacked up the car and spun the wheels and the offside rear feels rough compared to the others so I suspect it is this wheel bearing that is on the way out.
There is a wire attached to the hub which I guess is the ABS connection.
From what I can gather you replace the hub assembly rather than just the bearing, is this correct ?.
Has anyone done one these ? It looks like it's held to the rear suspension with 4 bolts so wonder if it is a straight forward job ?.
I have seen a few of these hub assemblies on E bay at various prices.
Thank you in advance for any help.
All the best
John

Replies 4

CTScottUSA, CT · Sep 15, 2012#2
The rear hub is relatively easy to change. You just need to located one that is ABS equipped as well:

1st gen rear hub.jpg
JOHNVWThread starterMerseyside UK · Sep 16, 2012#3
Hi,
Many thanks for your reply and for the diagram.
Yes it doesn't' look too difficult, I will locate a hub with ABS and have a go.
Thanks again
John
Geoff PeaceWigan · Sep 16, 2012#4
Originally Posted by CTScott ↑
The rear hub is relatively easy to change. You just need to located one that is ABS equipped as well:

Attachment 48455
I could not help but notice that the ABS sensor is listed as a non reuseable part. Surely one is not expected to buy an ABS sensor due to a failed wheel bearing! Or have I missed something? Could you please explain?

Regards Geoff Peace.
CTScottUSA, CT · Sep 16, 2012#5
Originally Posted by Geoff Peace ↑
I could not help but notice that the ABS sensor is listed as a non reuseable part. Surely one is not expected to buy an ABS sensor due to a failed wheel bearing! Or have I missed something? Could you please explain?

Regards Geoff Peace.
That is interesting that such a crazy expensive part is considered non-reusable. I have no idea as to why Toyota did that, unless the part gets damaged in the process of removing it from the hub.