ilikericeOriginal postsavannah, ga · Aug 29, 2012#1UPDATED OK, I am selling my side skirts and rear bumper.
scroll down for current off the car detailed pictures
They will need to have some body work done to it and repainted. The scratches are not noticable from the outside but definitly not show worthy.
Shipping is available, I can do Greyhound which is the cheapest, usually between $80-$100. I just looked up shipping to Seattle, WA and It will be about $600 in shipping thru FedEx. That is using a 84x36x36 (inches) box that weighs 60lbs. I do not know exact weight, just judging by my own strength. keep that in mind.
Asking $200 for the kit + shipping, pm a zip code and deliverer preference and I will get back to you asap
2 attachments not included in this copy
Replies 25
rapev-8WI · Aug 31, 2012#2OT what spoiler is it?
1.5Tampa · Aug 31, 2012#3I can vouch for this seller.
GLWS!
ilikericeThread startersavannah, ga · Sep 1, 2012#4Rally spoiler from trdsparks.com was already painted also.
b20vtegmaricopa, az · Sep 1, 2012#5LOVE this car... GLWS!!
wildmongoose26Dallas, TX · Oct 25, 2012#6Where is the front bumper? Looking for burnout front bumper before HIN Houston.
SAV912Savannah, GA · Oct 29, 2012#7He never got a front bumper. That's why he's selling the side skirts and the rear.
-C
ilikericeThread startersavannah, ga · Oct 29, 2012#8yep yep.. I been watching for a good front bumper lip. Haven't come across one yet. Sorry I haven't got any pictures up yet. I will do it this week. I will actually be trying to fix it for the Sibling Rivalry show this saturday coming up. wont look pretty but just a temp fix.
1.5Tampa · Oct 29, 2012#9trying to get my car done for the show too lol
ilikericeThread startersavannah, ga · Oct 29, 2012#10no se spanish
ilikericeThread startersavannah, ga · Oct 29, 2012#11OK, here are some pictures I took just a few minutes ago.. sorry for the dustyness.. been hanging on the garage wall for a couple months. I will go by this post by post..
This picture is from the bottom. couple scraps on the left and right, not noticeable when on the car. sits pretty low to the ground. I cut the center out for plans on putting a carbon fiber splitters under it. I still plan on doing it if I dont sell this bumper.
1 attachment not included in this copy
ilikericeThread startersavannah, ga · Oct 29, 2012#12as you can see this is the passenger side and where the the hole for a 10mm bolt goes. It is cracked, and this bumper is pretty heavy so now it sags. I think I should reinforce it with some aluminum fiber glassed behind it for stability. It was starting to vibrate on my exhaust and was annoying me.
second pic is from the inside. I didnt notice this problem until I was detailing it one day. The back tires will kick up alot of dirt and this bumper is molded into a bucket on both sides like this. Sand and water will build up adding additional weight to the bumper. Prob another reason why that clip is cracked. I recommend trying to close of that somehow with either rubber flap or something, I don't know. Just something for you to know about.
last is a straight up picture of the whole bumper. Paint isn't the best anymore, there is a paint bubble and a few scratches from my fiance's German Shepard jumping in the back a couple times.
3 attachments not included in this copy
ilikericeThread startersavannah, ga · Oct 29, 2012#13Both skirts have these holes. reason being. First I tried using double side tape. I also had my front fender liners out because I was running Rcomp 225/50 tires during autocross when I first got the car and they were tearing them up. SOO, rocks decided to find their way between the side skirt and the bottom where I put the double sided tape and scratched the crap out of it.. also rocks got between the top of the side skirt and the door, so when I open/close the door it scratched it all up also.. lesson learned.. so I took them off and dedided to just drill some holes and use screw them in. No issues after that except the damage was done.
I would recommend using these holes as pilots if you decided to do the same OR fill them in when you fix the scratches.
1 attachment not included in this copy
ilikericeThread startersavannah, ga · Oct 29, 2012#14ok, here is one of the skirts. there is a chip off the top corner as I circled, and the beautiful scratch.
Now, those arrows point to are not cracks or scratches. I put a clear piece of film on both skirts front and rear. It is also on the rear bumper behind the tire. I did this to prevent rocks from chipping the paint away. IF you pull this off it will take the paint off also. so keep that in mind. I just didnt do a good job and making it look pretty is all.
1 attachment not included in this copy
tk-421Dagobah · Oct 29, 2012#15 Originally Posted by zapesnap ↑
cuanto por los faldones?? soy de chile
Originally Posted by
ilikerice ↑ no se spanish
He wants to know the shipped price for the skirts to Chile. 🙂
ilikericeThread startersavannah, ga · Oct 29, 2012#16This is probably the worst.
first pic shows where a allowed a speed bump own me and obviously the skirt pulled away from the bolt.. fun.. also the chip up top.
next 2 pic is the amazing curb check I did a few month back.. will need to be resanded and painted unless you like the awesome speed scratches I put in it.
3 attachments not included in this copy
ilikericeThread startersavannah, ga · Oct 29, 2012#17 Originally Posted by
tk-421 ↑ He wants to know the shipped price for the skirts to Chile. 🙂
oh gezus.. I will have to look that up.. Thanks TK. After these pictures I dont think he will want to pay that much in shipping for these.. lol, I will look it up anyways though..
ilikericeThread startersavannah, ga · Oct 29, 2012#18That concludes my detailed pictures..
Any other request for pictures let me know. or any more questions.
ilikericeThread startersavannah, ga · Oct 29, 2012#19 Originally Posted by zapesnap ↑
cuanto por los faldones?? soy de chile
If you really want it. shipping is almost 2k thru FedEx to Chile.. thats residential shipping btw.. Either I am typing something in wrong, someone feel free to double check this and post a link or screen shot..
dimensions of box: 84x36x36 (inches) wieght: approx. 80lbs.
my zip code is 31419 Savannah, GA.
tk-421Dagobah · Oct 30, 2012#20daaaaaaaaaaaaaaamn. 😲
cali yarisCanoga Park, CA · Oct 30, 2012#21 dimensions of box: 84x36x36 (inches) wieght: approx. 80lbs.
When we ship a kit, it's two boxes and they are about 24 pounds and 10 pounds respectively. Your weights are crazy, it can't weigh 80 pounds!
ilikericeThread startersavannah, ga · Oct 30, 2012#22ok coolbeans.. I must be a weak S.O.B. price sounded crazy to me also because shipping is usually like 300 off ebay.. I was guestimating weight.. yet I did just work out before I was handling these things last night...
Thanks Cali, I will trying fiddling with it again when I get off work.
Yaris Tunerunderground · Oct 30, 2012#23Interested in both or either one if willing to part out, Will it fit '10 yaris 4-door LB ? check PM!
ilikericeThread startersavannah, ga · Oct 30, 2012#24PM sent.. It fits my 3 door LB. But will have to get the 07-08 tail lights to line up with the body. Side skirts look like they are made for the 5dr LB also. leaves room from the front door all the way to the back to clear a rear door.
cali yarisCanoga Park, CA · Oct 30, 2012#25Domestic shipping using Greyhound is very reasonable, only downside is dropping it off (seller) and picking it up (buyer)
ilikericeThread startersavannah, ga · Oct 31, 2012#26Yea, Thats how I got this kit.. I think you helped the seller if I remember correctly. I do not mind going thru GreyHound.