Yarisworld Archive

how to smoke headlights ?

5 posts · 3,596 views

Replies 4

eTiMaGoBangkok, Thailand · Aug 26, 2012#2
the usual way to spray anything... clean it well so there's no dust or oil, spray light coats, let it dry between coats, until it's dark enough to your liking...
nevadaIndonesia · Aug 31, 2012#3
You can try using window tinting for replacement
1.5Tampa · Aug 31, 2012#4
Dont forget to mask it off
harda toenailSE Missouri · Sep 7, 2012#5
Originally Posted by 1.5 ↑
Dont forget to mask it off
Ideally, remove the headlight. Will make the job much easier.

I did my dodge stealth years ago and it turned out really nice on the tail lights. Take your time. Most headlights have a protective coating that must be sanded off (takes forever) if you want it to come out right.

Sanding is very important. When you finish sanding, sand them again. When spraying, go with super light coats and let them dry in between coats.

When spraying, stop one shade lighter than what you want the finished product to be. Then apply a few coats of clear and it will slightly darken more and provide protection. Use quality clear coat and wax it a few days after you finish.