Yarisworld Archive

nst underdrive pulleys lower gas mileage?

11 posts · 7,900 views

b20vtegOriginal postmaricopa, az · Aug 19, 2012#1
i already know they increase throttle response, and make decent power... but does it do those things at the cost of lowering gas mileage?

also, i noticed that nst is no longer a sponsored vendor here at yarisworld, and the pulleys are no longer in stock on microimageonline.com... have they been discontinued? does micro image carry a replacement product that performs just as well, if not better?

Replies 10

baseballfan416Milwaukee, Wi · Aug 19, 2012#2
Increased performance = increased desire to drive hard = lower mileage. I'm sure if you drove with the same habits you would see a negligible difference.

NST doesn't make yaris stuff anymore. To my knowledge, they had poor customer service. In the meantime, micro image did their own crank pulley (sells for like $140 on the site). The microimage crank pulley is slightly lighter than the NST, and it's meatier in the center by the bolt (for increased durability).

You'll also see that nst made water pump and alternator pulleys. They do offer weight reduction as well. But because of their cost, and less documented benefit, they're often left out of the discussion.
packetraceQuebec · Aug 19, 2012#4
will you produce water pump and alternator pulley Garm :D ? I would be willing to throw money if you need :)
fnkngrvIn The Hotbox · Aug 19, 2012#5
I have had the NST Underdrive pulley installed since 08. If I drive with FE in mind and not for power band then I get better FE than I did with the stock pulley by 1/2mpg. I would think it would be the same with the MI pulley. As previously stated anytime that you put on a part to give you a power increase you have to be disciplined enough to not drive it harder if you wish to get the best FE possible.
b20vtegThread startermaricopa, az · Aug 19, 2012#6
Originally Posted by fnkngrv ↑
I have had the NST Underdrive pulley installed since 08. If I drive with FE in mind and not for power band then I get better FE than I did with the stock pulley by 1/2mpg. I would think it would be the same with the MI pulley. As previously stated anytime that you put on a part to give you a power increase you have to be disciplined enough to not drive it harder if you wish to get the best FE possible.
sounds good, looks like i'll be adding that on to my list of mods to do. thanks!
fnkngrvIn The Hotbox · Aug 19, 2012#7
Originally Posted by b20vteg ↑
sounds good, looks like i'll be adding that on to my list of mods to do. thanks!

NP...it is nice because it makes the engine rev more freely when you need it. Not gonna say that it will feel like a few pounds of boost tho 😆
packetraceQuebec · Aug 19, 2012#8
Originally Posted by b20vteg ↑
sounds good, looks like i'll be adding that on to my list of mods to do. thanks!
buy the one from Garm!!:P If you want it colored...make it anodized :)
b20vtegThread startermaricopa, az · Aug 19, 2012#9
Originally Posted by packetrace ↑
buy the one from Garm!!:P If you want it colored...make it anodized :)
yea, i plan to make all of my purchases through micro image 👍
jpmck03USA · Aug 20, 2012#10
The MI pulley works for me!

Installed it at between fill-ups (A).
Hooned it for the next tank (B).
Went back to my usual "no big rush" driving style (C)!

1 attachment not included in this copy

cali yarisCanoga Park, CA · Aug 21, 2012#11
will you produce water pump and alternator pulley Garm :D ?
We are considering it, that's all I can say at this point in time.