jamal1984Original postGeorgia, USA · Aug 16, 2012#1i'm adding a red carbon fiber to the back side that goes along to the front of my car.
here is a picture of before.
Picture not included in this copy
Picture not included in this copy
Replies 31
JumpmanYarisSO. INDIANA · Aug 16, 2012#2What did u use for glue?
jamal1984Thread starterGeorgia, USA · Aug 16, 2012#3few low res pics.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
jamal1984Thread starterGeorgia, USA · Aug 16, 2012#4 Originally Posted by
JumpmanYaris ↑ What did u use for glue?
vinyl wrap that has air channels on the back, dry install, remove anytime you like.
SAV912Savannah, GA · Aug 16, 2012#5Your wrapping skills are very good, no question about it. I would let you wrap my car if I could afford it.
But, no sir, the way that sits right now just is not my style.
-C
jamal1984Thread starterGeorgia, USA · Aug 17, 2012#6 Originally Posted by
SAV912 ↑ Your wrapping skills are very good, no question about it. I would let you wrap my car if I could afford it.
But, no sir, the way that sits right now just is not my style.
-C
you mean the wrap is too much or my yaris is too high? i'm open for comments.😢
matthewaiunited states · Aug 17, 2012#7your so high bro
1.5Tampa · Aug 17, 2012#82 fast 2 furious
vtencolumbus · Aug 17, 2012#9Hmmm wrap my HB with the red one .... How much did you charge for the job again ?
ilikericesavannah, ga · Aug 17, 2012#10no doubt your skill are awesome.. Not a fan of the red though. All black would look better. Or something less, that quarter panel is just too much. Instead wrap the front and rear lips and side skirts red and the rest black.. just a thought
jamal1984Thread starterGeorgia, USA · Aug 17, 2012#11 Originally Posted by
ilikerice ↑ no doubt your skill are awesome.. Not a fan of the red though. All black would look better. Or something less, that quarter panel is just too much. Instead wrap the front and rear lips and side skirts red and the rest black.. just a thought
no problems, we all see things differently, i had the same thought as you do before, but since the red carbon fiber is a little more expensive and not that popular for us.
Lucky my distributor gave me a 60x130 for free to try it out. Since i told him about my idea.
hell i did it anyway.
SAV912Savannah, GA · Aug 17, 2012#12 Originally Posted by
jamal1984 ↑ you mean the wrap is too much or my yaris is too high? i'm open for comments.😢
Well you are a mile high in the air, but I'm not going to hold that against you because I know how the roads in Atlanta are and everyone's Yaris sat at that level at some point. lol 😁
The red where the red is across the unibody just isn't my style though. Now it looks from a distance like a red Yaris that was in an accident and had a black Yaris donate some parts. If the red is too expensive, maybe vinyl the doors, unibody, fenders and bumper in the black carbon, and then do the hood, roof, and trunk/spoiler in the red carbon. Just an idea to get some form of flow going. I like the ideas that are going on, but they are all over the place.
How much does a wrap job cost though? I'm getting a spoiler sent in soon and was thinking of having it wrapped in black carbon just to save on paint costs, and having the roof wrapped to match. 🙂
-C
1.5Tampa · Aug 17, 2012#13^ That would be much more tasteful. Honestly all this wrapping just cheapens the car so much. The wrapping is made to accent portions of the car like a lip, hood, roof, trunk, pillars. They were not intended to cover an entire car.
TBH your car reminds me of something like this
http://img.tapatalk.com/42576604-ed32-f6fd.jpg TickleTimeTimArkansas · Aug 17, 2012#14^^not cool. hahaha
i like the originality of it. really good wrapping skills. what is your technique?
i wonder what it would look like if you also did front quarter panel and side skirt and the red was an 0 around the doors....
jamal1984Thread starterGeorgia, USA · Aug 17, 2012#15 Originally Posted by
vten ↑ Hmmm wrap my HB with the red one .... How much did you charge for the job again ?
PM.
jamal1984Thread starterGeorgia, USA · Aug 17, 2012#16 Originally Posted by
SAV912 ↑ Well you are a mile high in the air, but I'm not going to hold that against you because I know how the roads in Atlanta are and everyone's Yaris sat at that level at some point. lol 😁
The red where the red is across the unibody just isn't my style though. Now it looks from a distance like a red Yaris that was in an accident and had a black Yaris donate some parts. If the red is too expensive, maybe vinyl the doors, unibody, fenders and bumper in the black carbon, and then do the hood, roof, and trunk/spoiler in the red carbon. Just an idea to get some form of flow going. I like the ideas that are going on, but they are all over the place.
How much does a wrap job cost though? I'm getting a spoiler sent in soon and was thinking of having it wrapped in black carbon just to save on paint costs, and having the roof wrapped to match. 🙂
-C
i don't like how to wrap the trunk, hood and roof one color and the rest another, it's just so plain and simple, like many cars out there just wrap the hood and roof. shhhhhhhh.....we done this alot to customers :)
I see it's a little different, that is what i left it's black before and did not wrap it.
Yeah ideas are all over the place.
The whole wrap cost anywhere from $1K to $2K depend.
Wrapping just the spoiler probably will cost you the same amount as getting it painte
1.5Tampa · Aug 17, 2012#17 Originally Posted by
TickleTimeTim ↑ ^^not cool. hahaha
i like the originality of it. really good wrapping skills. what is your technique?
i wonder what it would look like if you also did front quarter panel and side skirt and the red was an 0 around the doors....
sorry I dont mean to be rude I know OP asked for feedback
jamal1984Thread starterGeorgia, USA · Aug 17, 2012#18 Originally Posted by
TickleTimeTim ↑ ^^not cool. hahaha
i like the originality of it. really good wrapping skills. what is your technique?
i wonder what it would look like if you also did front quarter panel and side skirt and the red was an 0 around the doors....
^^^^^Coool.. ahhahahha
You should get your car wrap like that, if you think it's look good = it's look good.
My technique?
Take your time, be patience, don't go
cheap, make sure have plenty of vinyl to works with. Go to youtube and watch all the videos you can find about VInyl Wrap.
I see you live in Alaska, you need to talk to whoever sell you vinyl and make sure that vinyl can take the beat from the cold.
i learned alot from my failures 👏
jamal1984Thread starterGeorgia, USA · Aug 17, 2012#19 Originally Posted by
1.5 ↑ sorry I dont mean to be rude I know OP asked for feedback
nothing taken. i like to hear what others think about it.
jamal1984Thread starterGeorgia, USA · Aug 24, 2012#20some close up pics, Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
WeeYariGeorgetown, Ontario, Canada · Aug 24, 2012#21It's unique, and now looks much better than it did in your earlier pictures (which I see are now deleted). In those shots, it really looked crappy with 3 or so different black body panel finishes. Now looks more cohesive. The seam on the rear wheel arch is a shame.
Should of cleaned the bird shit off before snapping the pics.
1.5Tampa · Aug 24, 2012#22Carbon Fiber doesn't repel bird poop??? 🤷
jamal1984Thread starterGeorgia, USA · Aug 24, 2012#23 Originally Posted by
WeeYari ↑ It's unique, and now looks much better than it did in your earlier pictures (which I see are now deleted). In those shots, it really looked crappy with 3 or so different black body panel finishes. Now looks more cohesive. The seam on the rear wheel arch is a shame.
Should of cleaned the bird shit off before snapping the pics.
hahah thank you and yeah sorry for the bird poops, it's happended while i'm snapping the picture......🤣
jamal1984Thread starterGeorgia, USA · Aug 24, 2012#24 Originally Posted by
1.5 ↑ Carbon Fiber doesn't repel bird poop??? 🤷
no, but i can tell you this, all the bugs...whatever that it's hard to get rid of it before, now it's super easy, just wipes it off.
I guess it's not a smooth finishe like Paint it's has texture rough feel to it. I think that is why it's so easy to clean off them buggssss.
PatrickJohnsonMurfreesboro, TN · Aug 24, 2012#25Not bad, although I personally would have done the front fenders to for front/back symmetry.
WeeYariGeorgetown, Ontario, Canada · Aug 24, 2012#26 Originally Posted by
PatrickJohnson ↑ Not bad, although I personally would have done the front fenders to for front/back symmetry.
I wouldn't. The way it is has an organic quality. Sort of like the red takes root in the A pillar, and grows as it is swept towards the rear.
Doing the front fenders would be a big red blob, tappering to almost nothing along the roof, ending in another big red blob.
packetraceQuebec · Aug 24, 2012#27drop it!!
1.5Tampa · Aug 24, 2012#28No slam it lol ^^
david_827boston, MA · Aug 24, 2012#29how does the wrap hold up? for example, when washing the car?
packetraceQuebec · Aug 24, 2012#30 Originally Posted by
1.5 ↑ No slam it lol ^^
hehehe yeah slam it !!
jamal1984Thread starterGeorgia, USA · Aug 24, 2012#31 Originally Posted by
packetrace ↑ drop it!!
not right now, roads around here not so good, and i'm driving it through all kind of holes......
jamal1984Thread starterGeorgia, USA · Aug 24, 2012#32 Originally Posted by
david_827 ↑ how does the wrap hold up? for example, when washing the car?
very well, you can pressure wash if you like to, just be careful around the corners, do not wax it or polish the vinyl, only use quick detailer or spray wax.