Yarisworld Archive

Behold: The Car Kracker!

4 posts · 3,034 views

tk-421Original postDagobah · Jul 31, 2012#1
This looks like an awesome project: http://www.gadgetgangster.com/news/54/556

A few quotes from the site:
Want to unlock your car door with your phone? Re-map steering wheel buttons, or log performance data? The Car Kracker an open-source addon for your car that lets you;
  • Add an Aux-In or music jukebox
  • Remap steering wheel buttons
  • Remove the Nav warning screen
  • Display text like emails and SMS on your Sat Nav, radio, or dashboard
  • Access engine and performance data like air/fuel ratio, oil pressure/temp, and VANOS
  • Code retrofit parts like rain sensors, run-flat tires, theft alarms, and keys
  • Access the proprietary error logs to troubleshoot engine, transmission, or accessory problems.
You can also upgrade Engine / Transmission firmware, remove the speed limiter, reset warning lights, and change dealer settings.
Looks like it will work with any car compatible with ISO 9141 standards (including Toyotas), but I can't find any specific information on our cars.

Does anyone know if the Yaris is compatible (*cough*CTScott*cough*)?

Replies 3

CTScottUSA, CT · Jul 31, 2012#2
ISO 9141 is the old (pre 2006 for Toyota) OBDII communication method.
tk-421Thread starterDagobah · Jul 31, 2012#3
Bummer. Any chance that it could be tweaked for our cars?
(Long-shot, I know... 🙁)
CTScottUSA, CT · Jul 31, 2012#4
Originally Posted by tk-421 ↑
Bummer. Any chance that it could be tweaked for our cars?
(Long-shot, I know... 🙁)
ISO 9141 is very simple to interface to. It only takes a transistor for the hardware interface and some simple serial communications for the software side. Our cars use the CAN Bus standard ISO 15765, which requires a significant amount of hardware and software to interface to. This is a big part of the complexity of my YarGauge.