Yarisworld Archive

FS Ksport Springs

54 posts · 12,747 views · page 1 of 2

1.5Original postTampa · Jul 27, 2012#1
SOLD

2 attachments not included in this copy

Replies 53

1.5Thread starterTampa · Jul 28, 2012#2
bump pics up
otterhereSoutheast · Jul 28, 2012#3
$60? I'll have to pay to ship to KY, as well as pay to install (I'm a ditzhead girl). If too low, no pun intended, let me know how low you'll go! Thanks.
1.5Thread starterTampa · Jul 28, 2012#4
The install is not that hard you would probably surprise yourself with how capable you probably are.

If you pm me a price we can work something out.
1.5Thread starterTampa · Jul 30, 2012#5
Ttt
otterhereSoutheast · Jul 30, 2012#6
Originally Posted by 1.5 ↑
The install is not that hard you would probably surprise yourself with how capable you probably are.

If you pm me a price we can work something out.
I am always surprised when I am capable of inflating my own tires without blowing them up in my own fact (I cannot do it myself; trust me on this)...

PM'd you; sorry for the breach of etiquette! And thanks.
1.5Thread starterTampa · Jul 30, 2012#7
replied

bump
1.5Thread starterTampa · Jul 31, 2012#8
still for sale
1.5Thread starterTampa · Aug 1, 2012#9
Bump
ChitownY@RisChicago · Aug 1, 2012#10
What would typical shop labor time be to get oem off and these babies on, 2 hrs?
g.q.viosOrange County · Aug 1, 2012#11
I had a shop in O.C do it for 100$ installed took him 1 hour i was very happy and low to the ground... So 200 dollars isint bad for a droped yaris whats the rate on the springs again 1.5 bump for a good deal 👍
ChitownY@RisChicago · Aug 1, 2012#12
^^Cool.
Will 205/40/17 slicks be rubbing fender liner after the drop?
1.5Thread starterTampa · Aug 2, 2012#13
This is a pretty aggressive drop. My fronts were really low. I am running the stock 15s with 60 profile tires and I almost never rubbed. 17s may be different.

The spring rate is progressive.

Shop time should be about 2-3 hours for all four. Around 100-300 depending where you go, shop around.
ChitownY@RisChicago · Aug 2, 2012#14
"Almost" never rubbed on 15s?
Ehh..Im lookin at some scraping symphony on 17s I gather. Bummer.
Stupid question here: What is the difference with coilovers and just lowering springs? I dont get it. You can make height adjustments with coilovers on the fly per say?
1.5Thread starterTampa · Aug 2, 2012#15
Yes. Springs replace the coil portion of your suspension without touching dampers. You have four springs and four dampers. The springs only will come with a predetermined drop and spring rate that cannot be adjusted.

Coilovers are fully adjustable race suspension. You will receive 4 dampers and 4 springs. In the rears the springs sit on a perch connected to your control arm while the dampers are an A style strut that sits seperately. The struts allow you to adjust spring preload and dampening (soft---> hard). The springs will then have an adjustable locking collar system allowing you to adjust ride height.

In the front your spings will sit around your dampers in a mcpherson style strut. This will attach to your hub and you chassis and will allow you to adjust spring preload or ride height by moving the three locking collars and you can adjust dampening as well. All seperate from each other.

The 17s might be fine. I mean almost like hitting a bump and having the front completely lift off the ground and come back down and then yes my tires did get pushed into my fender lining. I think that was the only time I rubbed. Freaking train tracks.
BEEFnorth carolina · Aug 2, 2012#16
I think it is also worthy of note that most coilover setups run around $1k. you pay for adjustability.
1.5Thread starterTampa · Aug 2, 2012#17
Yes coilovers are much more expensive than springs alone. Also you can go wayyyy lower, forgot about that lol
ChitownY@RisChicago · Aug 2, 2012#18
Wow. Yea smh..roads here in chi are porbably as nice as Baghdads..and I have to drive over train tracks like 5 times a day. I enjoy going dam near airborne over them like General Lee, and not hearing the slightest scrape.
Ive seen lowered Si's come to a dead stop over the same tracks, I'll nearly rear end them and have to whip around.
So that sucks..cuz I really like the lowered look. So I guess I gotta pay to play with the coilovers, if I want to stay rolling on 17s or 18s :(
1.5Thread starterTampa · Aug 2, 2012#19
Coilovers are going to give you the option of how low or high and then you can adjust them to be stiff enough that you wont get that much suspension travel.
otterhereSoutheast · Aug 2, 2012#20
Is it possible to lower JUST the back? At least on mine (stock model), the back seems to ride much higher than the front; can actually see the springs underneath from behind. So fugly! But apparently have to remove struts in front (?) to install, which will make having springs installed quite expensive -- around $300. Can I lower back-end only???
1.5Thread starterTampa · Aug 2, 2012#21
You can by installing springs in the rear only, but any springs you install are going to drop the rear to.below the front which is going to look more "fugly" IMO
1.5Thread starterTampa · Aug 3, 2012#22
Bump
1.5Thread starterTampa · Aug 5, 2012#23
Price drop $90 + shipping
1.5Thread starterTampa · Aug 6, 2012#24
ttt
1.5Thread starterTampa · Aug 7, 2012#25
bump
1.5Thread starterTampa · Aug 9, 2012#26
Ttt
g.q.viosOrange County · Aug 9, 2012#27
Still not sold!!!! Damn!!!! Buy these allready!!!😠
1.5Thread starterTampa · Aug 10, 2012#28
Good look gq 👍
1.5Thread starterTampa · Aug 11, 2012#29
TTT
1.5Thread starterTampa · Aug 12, 2012#30
60 + shipping!!!
SAV912Savannah, GA · Aug 12, 2012#31
I assume these are gonna go lower than the TRDs that are already on my car. I ask because the Mini 17s that I have make the car sit about half to three quarters an inch higher than on the stock pizza cutters.

I'm debating if I want to come down there and pick these up and then sell the TRDs. The problem is that I wouldn't be able to go down there until next weekend. 😁

-C
1.5Thread starterTampa · Aug 13, 2012#32
You are correct. On my sedan it sat really low until I gutted the rear. Then that back sat higher.

You mean like sunday 8/19? That weekend is our Orlando meet it's a little closer to you and we could all chill. Ill let you know If I still have them going into the weekend.
SAV912Savannah, GA · Aug 13, 2012#33
Oh nice. Hell, that'd be cool just to chill and stuff even if you don't have them.

Who all will be there? Anyone else from Georgia? XD, sorry...you can just PM me the details so we don't screw up your sale thread. 😁

-C
1.5Thread starterTampa · Aug 15, 2012#34
Bump
808Yaris07HAWAII!!!! · Aug 16, 2012#35
Originally Posted by 1.5 ↑
This is a pretty aggressive drop. My fronts were really low. I am running the stock 15s with 60 profile tires and I almost never rubbed. 17s may be different.

The spring rate is progressive.

Shop time should be about 2-3 hours for all four. Around 100-300 depending where you go, shop around.
HHMMM..well..I was thinking about dropping the Yaris before I buy rims and tires..

I currently run the stock 15's with 60 tires..you have a pic of how low your Yaris was with the springs in..I might be interested..
Profotoiamgarden grove ca · Aug 16, 2012#36
yes definatly coil overs if you want that size rims but why ewww

to the guy asking the time for install
i had a dumb friend do it its not that hard well it wasnt while i watched
he did it with minimal tools to
1.5Thread starterTampa · Aug 16, 2012#37
I love my Megan's ^^
1.5Thread starterTampa · Aug 16, 2012#38
Originally Posted by 808Yaris07 ↑
HHMMM..well..I was thinking about dropping the Yaris before I buy rims and tires..

I currently run the stock 15's with 60 tires..you have a pic of how low your Yaris was with the springs in..I might be interested..
Yes sir here you go.

Feb 4 FL meet

There are more pics on MI as well but I can't find them right now.
g.q.viosOrange County · Aug 16, 2012#39
Originally Posted by Profotoiam ↑
yes definatly coil overs if you want that size rims but why ewww

to the guy asking the time for install
i had a dumb friend do it its not that hard well it wasnt while i watched
he did it with minimal tools to
ahhh.... you miss your dumb friend
1.5Thread starterTampa · Aug 17, 2012#40
bump
1.5Thread starterTampa · Aug 20, 2012#41
Ttt

What's it gonna take to get these sold? I can include stock struts to make the install easier
1.5Thread starterTampa · Aug 21, 2012#42
bump
1.5Thread starterTampa · Aug 22, 2012#43
Still available
1.5Thread starterTampa · Aug 24, 2012#44
bump
1.5Thread starterTampa · Aug 25, 2012#45
surprise... still for sale lol
1.5Thread starterTampa · Aug 28, 2012#46
ttt

No offers?
SAV912Savannah, GA · Aug 28, 2012#47
Originally Posted by 1.5 ↑
ttt

No offers?
If you hold on to them until the meet in October, I'll get them off you. Then I'll have some TRDs to sell. 😁
1.5Thread starterTampa · Aug 29, 2012#48
Yea I understand. No friends with us addresses that live close to the border?

Yea sav if I still have em they're yours.
cali yarisCanoga Park, CA · Aug 29, 2012#49
USPS Priority for 20 pounds is $32 to Canada. Labeled as a "gift", described as a "steel springs", and no invoice included should result in zero or very low duties/fees.

Just saying
goliath1812Ocala Florida · Aug 29, 2012#50
did someone say October meet? oh and....bump :-)