Yarisworld Archive

power windows question

5 posts · 4,724 views

A1phazu1uOriginal postSanta Clarita · Jul 25, 2012#1
i used the search option to try and find my answer, but had no luck. Im installing my power windows and i need to know which power source to use. I obviously can't use the constant 12v source used for keyless entry, is there another source that turns on when the car is on?

Replies 4

CTScottUSA, CT · Jul 25, 2012#2
If you used the terminal on the under dash fuse panel for your keyless entry, that same point would be fine for the window power. That tap point is a 60A capable supply, so you can use a female spade terminal that can accept 12 AWG wire and then connect two separate in-line fuse holders to it. I have my remote starter, my heated seats, and my power hatch popper all connected there with four separate fuses.
A1phazu1uThread starterSanta Clarita · Jul 25, 2012#3
Originally Posted by CTScott ↑
If you used the terminal on the under dash fuse panel for your keyless entry, that same point would be fine for the window power. That tap point is a 60A capable supply, so you can use a female spade terminal that can accept 12 AWG wire and then connect two separate in-line fuse holders to it. I have my remote starter, my heated seats, and my power hatch popper all connected there with four separate fuses.
The only issue with that is the power windows still work when the power is off. A perk for some but I would like them to not work unless the key is in the ignition like most cars.
CTScottUSA, CT · Jul 25, 2012#4
Originally Posted by A1phazu1u ↑
The only issue with that is the power windows still work when the power is off. A perk for some but I would like them to not work unless the key is in the ignition like most cars.
My seat heaters are ignition switched as well. You tap that point for the high power feed and then use a relay to switch it with the coil connected to the pink wire on the ignition switch.
A1phazu1uThread starterSanta Clarita · Jul 26, 2012#5
Originally Posted by CTScott ↑
My seat heaters are ignition switched as well. You tap that point for the high power feed and then use a relay to switch it with the coil connected to the pink wire on the ignition switch.
oh i see. I'm pretty sure i got a good idea of what your talking about. Thanks Scott!