Yarisworld Archive

Current pics before further modding

14 posts · 7,139 views

3cyltrboOriginal postOttawa · Jul 18, 2012#1
Haven't taken pics in a while, but I needed some for a show I'm hoping to attend, so I thought I'd share them here.

Here is the car as of two weeks ago

I'll be doing another photoshoot soon, because I've got a ton of stuff piling up (money has been flying out of my wallet :( )

Vitz badging
rear wing
centre console armrest
TRD carbon fibre shiftknob
Darkened (painted) headlight chrome (total PITA to do)
UltraRacing front upper strut brace
UltraRacing rear upper strut brace
UltraRacing room bar (In another month)
MicroImage shortshifter and shifter bracket
MicroImage gas hood struts
PenquinGarage 13mm rear axle spacers (not on in these pics)
Simota Carbon Fibre Airbox
NST lightweight crank pulley / waterpump pulley & alternator pulley
Standard Suspension STD R1 coilovers
16x7 Konig Heliums with 195/50/16 Falken Ziex

I have 15" (8.6lb) SSR Type C's being powdercoated as we speak, and they will soon replace the Konigs / along with 195/50/15 Yokohama S-drives

Also have proper SSR centre caps / hub-centric rings

Also In my garage waiting for install:

-JDM power folding mirrors switch (still haven't tracked down the actual mirrors - I've begun to think it would be easier to find the second shooter from Dallas in 1963 than it would be to find JDM power folding mirrors)


-Carbon Fibre mirror covers (waiting for install onto JDM mirrors - that are themselves impossible to find)

-DC Sports ceramic coated header (waiting for install along with ARP header studs)

-Intake Manifold Spacer waiting for Install

-OBX header back exhaust (waiting for install)

-UltraRacing mid under bar

-OEM power windows / OEM power locks (waiting for install)

-OEM cruise control (waiting for install)

Its my daily driver but I try to keep it clean.

Front 3/4

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Rear 3/4

Picture not included in this copy

Picture not included in this copy


Cheers

Will

Replies 13

3cyltrboThread starterOttawa · Jul 18, 2012#2
Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
vtencolumbus · Jul 18, 2012#3
Looking good Will
suckerfaceMilwaukee, WI · Jul 18, 2012#4
Originally Posted by 3cyltrbo ↑
JDM power folding mirrors switch (still haven't tracked down the actual mirrors - I've begun to think it would be easier to find the second shooter from Dallas in 1963 than it would be to find JDM power folding mirrors)
I was taking a look at these and seeing if I could get them to work. What switch do you have? Can you post a pic?

http://www.rhdjapan.com/toyota-oem-o...p9-scp90-63861
Picture not included in this copy
3cyltrboThread starterOttawa · Jul 18, 2012#5
Originally Posted by vten ↑
Looking good Will
Thanks

W
pj. olssonGermany · Jul 18, 2012#6
Are this JDM power folding mirrors switch also available for the model "zsp90" (europe TS!) ???

Greez from germany
Pj.
3cyltrboThread starterOttawa · Jul 18, 2012#7
Originally Posted by suckerface ↑
I was taking a look at these and seeing if I could get them to work. What switch do you have? Can you post a pic?

http://www.rhdjapan.com/toyota-oem-o...p9-scp90-63861
Picture not included in this copy
ARGHHHHHH, I didn't find that link but I did email RHDjapan and they told me they didn't have anything? (WTF!!!)

Thanks for the link

I'll take a pic of my switch tonight (its the OEM JDM switch)

BTW, CTScott helped me with the part #'s we need for the Mirrors, but I haven't had luck finding any

Here are the #'s

87940-52890 (left side mirror)
87910-52A10 (right side mirror

Will
3cyltrboThread starterOttawa · Jul 18, 2012#8
Originally Posted by pj. olsson ↑
Are this JDM power folding mirrors switch also available for the model "zsp90" (europe TS!) ???

Greez from germany
Pj.
I don't know why the switch wouldn't fit

when I take pics, I'll show the comparison between stock and JDM

W
WeeYariGeorgetown, Ontario, Canada · Jul 18, 2012#9
The PGs are going to push those rears out nicely. Everything looks great until you see the current wheel tuck happening back there. You will have to add some negative camber tho.
suckerfaceMilwaukee, WI · Jul 18, 2012#10
Originally Posted by 3cyltrbo ↑
ARGHHHHHH, I didn't find that link but I did email RHDjapan and they told me they didn't have anything? (WTF!!!)

Thanks for the link

I'll take a pic of my switch tonight (its the OEM JDM switch)

BTW, CTScott helped me with the part #'s we need for the Mirrors, but I haven't had luck finding any

Here are the #'s

87940-52890 (left side mirror)
87910-52A10 (right side mirror

Will
If you order them, ask if you can get a discount on two sets and I'll go in with you on them.
KillchainAlbuquerque · Jul 18, 2012#11
Mes likes, good looking car.👍
3cyltrboThread starterOttawa · Jul 19, 2012#12
here is what the switch looks like (this one isn't mine)

Picture not included in this copy
KioshiFremont, CA · Jul 20, 2012#13
i dig your darkened headlights :D

For that JDM auto folding switch, you need 2 pins with wires attached and tap them to the left and right wire/s of the auto folding mirrors. Not sure which one. Remember reading echo's older posts on MI forums though.

P.S. the switch is the exact same size as the USDM one on our cars. Just 2 more pins need to be connected and tapped somewhere. Thats all i remember from past posts of the user who had them.
3cyltrboThread starterOttawa · Jul 20, 2012#14
Originally Posted by Kioshi ↑
i dig your darkened headlights :D

For that JDM auto folding switch, you need 2 pins with wires attached and tap them to the left and right wire/s of the auto folding mirrors. Not sure which one. Remember reading echo's older posts on MI forums though.

P.S. the switch is the exact same size as the USDM one on our cars. Just 2 more pins need to be connected and tapped somewhere. Thats all i remember from past posts of the user who had them.
I remember when he had them, and I seem to remember asking him several times for input - but alas..........................