sparkin88Original postChampaign, IL · Jul 13, 2012#1Just bought them but can't find anywhere about whether I need to cut the bump stops or not. Maybe I just suck with the search feature.
Garm? or Anyone that has them cut them or not? Can't wait to get them installed.
Replies 19
new-yaris-ownerMontreal, Qc · Jul 13, 2012#2Then why don't you go see someone that can install them.. like a garage or something, someone who know how to install them will know what to do with it.
Get some pics when done ;)
1.5Tampa · Jul 13, 2012#3^ tbh I would venture to say a lot of shops would not cut them and let you bottom out simply because its not always necessary so they may not know better
OP: yes cut them about in half along the urethane sleeve portion its super easy to cut them and it will prevent you from bottoming out. GL and enjoy.
cali yarisCanoga Park, CA · Jul 13, 2012#4sorry, just saw this. The Tanabe DF210 instructions suggest cutting the bump stops in half. I think that is a fair amount for our springs as well. Pretty sure I have a PDF of spring install on our forums under the Downloads section.
thebarberGrand Rapids, MI · Jul 15, 2012#5cut 'em
malibuguyWestminster, MD · Jul 15, 2012#6I didnt cut mine...i may do so when i upgrade the dampers
SAV912Savannah, GA · Jul 15, 2012#7I'm on the TRD suspension and I didn't cut mine. It specifically said NOT to. If you plan on upgrading your shocks any time down the line to match the springs, you shouldn't cut them.
Then again, even when I was on just TRD springs and stock shocks, I didn't cut mine and never bottomed out. Really, if you want that extra quarter inch or so, I suppose you could cut them.
-C
CharlieBravoFlorida · Dec 22, 2013#8Question on the MI springs: Is the writing, "Micro Image" supposed to be upside down when installed? I currently have one on right-side up, but it doesn't look right.
CharlieBravoFlorida · Dec 22, 2013#9I'm talking about the front struts btw. But an answer on both the fronts and rears would be appreciated!!
1.5Tampa · Dec 22, 2013#10I've always know the writing to indicate what direction the springs go. So if your writing is upside down then the spring would be up side down.
cali yarisCanoga Park, CA · Dec 23, 2013#11yeah pretty sure the writing goes up.
IllusionXBrossard, QC · Dec 23, 2013#12CharlieBravoFlorida · Dec 23, 2013#13so here's OEM vs MI (with writing correct-side up). It looks like the top of the OEM better matches the bottom of the MI. I tried putting the MI spring in right-side up, but the "hat" would be be angled against the nut.
1 attachment not included in this copy
CharlieBravoFlorida · Dec 23, 2013#14Here's how I installed it (writing upside-down). It looks just like the OEM one. I've driven about ~15 miles on them so far,and everything seems ok. Been smooth road though. Tomorrow will be a little more bumpier as I head to work...
1 attachment not included in this copy
1.5Tampa · Dec 23, 2013#15the "top" and "bottom" in the first pic dont look different to me on the MI spring so i dont see the difference that caused you to want to flip it
CharlieBravoFlorida · Dec 23, 2013#16Oh well......thanks for all the replies! I guess I'll re-attack it when I get new shocks/struts sometime down the road.....
IllusionXBrossard, QC · Dec 28, 2013#17i believe my oem springs came out angled against the nut when i took it out..
CrankyOldManWest Michigan · Dec 29, 2013#18Strange: one of my MI springs made the top bearing sit flat, the other was angled. I figured it would just level out after a while, but when I took them off this fall, the angled one was still angled and looked like it may have damaged the bearing. I was also experiencing very uneven tire wear on that spring. Perhaps there's a manufacturing defect? I'll see about getting pictures soon.
1.5Tampa · Dec 30, 2013#19if you flip that angled spring like CharlieBravo does it fix the angle problem?
cali yarisCanoga Park, CA · Dec 30, 2013#20That is incorrect. Writing goes right side up.
Originally Posted by
CharlieBravo ↑ Here's how I installed it (writing upside-down). It looks just like the OEM one. I've driven about ~15 miles on them so far,and everything seems ok. Been smooth road though. Tomorrow will be a little more bumpier as I head to work...