Yarisworld Archive

Misfire into multiple cylinder!

22 posts · 14,494 views

maxthehaxOriginal postQuebec · Jul 2, 2012#1
Till last week something started. Sometimes when on low-mid load, the engine feels like it cut-off for a second only, and it started to bug me. I was still able to drive it normally without major problem.

I though it was my MAF getting too dirty, so I cleaned it. It did not cure the problem and Im not sure if it helped. Car was still driving perfect except that little cut-off.

Today, I started to intall my oil cooler. I did not finish the job because of a malfunction in a part. So I simply put back my oil filter and some intercooler piping on.
Batterie was plugged all the time.
I cutted, I grinded, with 2 tools, a grinder and my dremel.
And I played with my oil filter...

Those things are the only one I did... This morning I start the car and it runs like a Cam'd muscle car or a subaru.
3 CEL; P0300, P0302, P0303, well I think they are all missfire into one or multiple cylinder.

Could I have damage something electrical? Coils, or the FIC? Maybe a fuse? Because I used my electrical tools on the car.
Picture not included in this copy


This morning when my car was missfiring like shitt, I started by removing all intercooler piping, clean the inside, reclean the MAF.
Now the problem is almost gone, I can take-off from the first gear, and the engine idle a lot better. But it is still not good, on load it look like it missfire/cut-off.

I will try to change that MAF for a new one, also I think it would be good to change my O2 sensors they are old as hell.

Replies 21

maxthehaxThread starterQuebec · Jul 3, 2012#2
UPDATES

This morning the car was bad as hell, missfire into multiple cylinder again. P0300, P0302, P0303, P0304...

I simply removed my AEM FIC, replugged like OEM, the car runs fine now but very very rich! The stock ecu cannot take my 370cc injectors

So I think my FIC was the problem...

I will reinstall my stock injectors, or I will simply fools my plugs running that rich. 10:1 AFR on low low low load... haha 12:1 idle
1.5Tampa · Jul 3, 2012#3
those things are always having issues. So many units have problems. Hope they send you a new unit.
YodaFL · Jul 3, 2012#4
Do you have the plug and play or is it wired in?
maxthehaxThread starterQuebec · Jul 3, 2012#5
Originally Posted by Yoda ↑
Do you have the plug and play or is it wired in?
I have the plug n play harness... Thats why it took me 5 mins removing it and plugging the oem back.

I need to find out whats the best standalone ECU to get for my car, it seems to be so big of a job...

I lost so much power all over my rpm/load range without the FIC, thats incridible!...
YodaFL · Jul 4, 2012#6
It might be the unit but most issues with it are due to wiring it up. But you have the pnp harness so I don't know. I heard sone had problems with the boomslang harness tho. Ask Scott
maxthehaxThread starterQuebec · Jul 4, 2012#7
Originally Posted by Yoda ↑
It might be the unit but most issues with it are due to wiring it up. But you have the pnp harness so I don't know. I heard sone had problems with the boomslang harness tho. Ask Scott
I ran the FIC for a year now, It was fine until about a week. And a morning it simply wont work like I described in first post...

Anyway I would just like to learn more about the work implicated into installing a full standalone ecu on my car. I dont want to plug a piggyback again...

Unfortunatly there is no documentations about installing lets say a universal EMS on my car...
maxthehaxThread starterQuebec · Jul 19, 2012#8
I have updates;

Even if my FIC worked ``fine`` for a year before messin up, I decided to take a close look at the wiring. Lets says the lack of PLug N play standalone system and their very high prices make me think about it a couple days. I come to the conclusion that I already spent enough and I have other project in life (dont worry I still love my car like before! lol)

So to make sure I have a 100% correct connections I decided to buy a PLUG N PLAY harness for the scion xb, sold by dezod.

I will give more infos when I receive that harness and try it out!
cali yarisCanoga Park, CA · Jul 20, 2012#9
^ You didn't buy from us? 🙁
cali yarisCanoga Park, CA · Jul 20, 2012#10
I have the plug n play harness... Thats why it took me 5 mins removing it and plugging the oem back.
Even with custom wiring, I believe you can use the Null connectors that come with the FI/C and disable it. I did that on mine before my tuning was done.
fnkngrvIn The Hotbox · Jul 20, 2012#11
Originally Posted by cali yaris ↑
Even with custom wiring, I believe you can use the Null connectors that come with the FI/C and disable it. I did that on mine before my tuning was done.

Yup....I am still using my bypass since I can't seem to idle for shit with this replacement motor. Using same maps as other motor which would idle fine, yet with this one it won't. Stupid.
maxthehaxThread starterQuebec · Jul 21, 2012#12
Originally Posted by cali yaris ↑
^ You didn't buy from us? 🙁
Lol, do you really make a plug n play for the echo?

I though you were but for the Yaris...

Updates;
My package just passed the Canada border. I should reveice it during the week.

I feel a lot like I will plug everything and it will still be the same lol. At least I will know its not a wiring issue.

Q: Does it happen sometimes that FIC/piggyback unit could lost some datas in memories?
cali yarisCanoga Park, CA · Jul 21, 2012#13
A: It's easy to reload your map, and see if anything changes.

Lol, do you really make a plug n play for the echo? I though you were but for the Yaris...
You're on our forums -- you know we serve all brands of cars and source parts for everyone. If I don't have a chance to earn your business, I can't be a vendor. 🙁
maxthehaxThread starterQuebec · Jul 21, 2012#14
Originally Posted by cali yaris ↑
A: It's easy to reload your map, and see if anything changes.



You're on our forums -- you know we serve all brands of cars and source parts for everyone. If I don't have a chance to earn your business, I can't be a vendor. 🙁
I understand :P

And dont worry I already rock`s a couple of your parts :P

I just received your new fuel rail, very nice finish. If I can get that FIC working again, it will be my next install.

Btw, off topic, are you able to source me a carbon fiber hood for my echo/vitz hatch?

Thanks
cali yarisCanoga Park, CA · Jul 21, 2012#15
^ I'll check, but probably not from the USA, I don't think we had the Echo hatch here, or very many of them -- maybe someone else knows better than me.
maxthehaxThread starterQuebec · Jul 23, 2012#16
UPDATES;

Harness installed. I still get missfiring, I can move the car but not drive it. It runs rough...

I want to plug a laptop on it. What should I look at first if my problem is missfiring?

Thanks!
chaditotxSan Antone, Tx · Sep 6, 2012#17
What do your plugs look like? Coilpacks? Did you nick anything on the factory harness? Crank position sensor?
maxthehaxThread starterQuebec · Dec 10, 2012#18
Originally Posted by chaditotx ↑
What do your plugs look like? Coilpacks? Did you nick anything on the factory harness? Crank position sensor?
Everything was alright... The FIC unit itself was the problem.

I changed to a new unit with the same PnP harness, everything is fine now.

Thanks for inputs everyone!
thefallsSunny place · Dec 11, 2012#19
So the FIC was good for only one year. Hmm. Is there anything else,piggyback than we can use. Emanage Ultimate?
yaris2010RSAngus, Ontario · Dec 11, 2012#20
after a year AEM replaced your FIC? whats the warranty on these things?
cali yarisCanoga Park, CA · Dec 12, 2012#21
We now have a Boomslang harness that is plug 'n play with the AEM EMS2, in case anyone wants even more control and a better management unit. The EMS can take over any function from the ECU, including the ability to retard/advance timing.

Not a cheap proposition, but the best of both worlds and the way I would have done it were it available at the time!
Focus_Sh1ftNew Jersey · Dec 12, 2012#22
Originally Posted by cali yaris ↑
We now have a Boomslang harness that is plug 'n play with the AEM EMS2, in case anyone wants even more control and a better management unit. The EMS can take over any function from the ECU, including the ability to retard/advance timing.

Not a cheap proposition, but the best of both worlds and the way I would have done it were it available at the time!
I don't even.... WHAT.

So you're saying there's no need to run new wires to all the sensors, and instead you can just utilize the factory harness?

That sounds too good to be true.