Lady JOriginal postUnited States · Jul 1, 2012#1I prefer the Se model Bumper and would like to put it on my L they seem to be the same fitting apart from the grills and fog light inserts,my concern is mainly the fender liners as the older model RS fender liners were different from the regular liners.
Has anyone done this mod or have any insight?thanks
Replies 36
12 yarisYork,Pa · Jul 1, 2012#2I thought about this myself,however to purchase everything new
wouldn't be cost effective.I'll just wait for used or aftermarket...
KioshiFremont, CA · Jul 2, 2012#3 Originally Posted by
12 yaris ↑ I thought about this myself,however to purchase everything new
wouldn't be cost effective.I'll just wait for used or aftermarket...
eBay has tons of 2012 RS aka SE in North America bumpers for sale (front and rear), used from Japan...
A LOT-
Dont get aftermarket...they will be a pain in the ass to fit...replica always are bad.
^ they run from 400-450 for used jp oem stuff, shipped.
why?harnett county NC · Jul 2, 2012#5Or you can see if you can find any intact from a junkyard when they start getting wrecked for a cheaper price as well. A nice rear ender and you can take everything you want from the front.
KioshiFremont, CA · Jul 3, 2012#6CPALK719Hollywood, Florida · Jul 3, 2012#7 Originally Posted by
Kioshi ↑
only problem i see about buying a used JDM front or rear, is that and im almost 100% sure, their colors aren't exactly the same as ours. well at least not all of there colors. so its going to run you a good amount for the front bumper from ebay and then your gonna have to pay to get it repainted.
i know they'll also be bending it when they place in a box to ship it as well...
KioshiFremont, CA · Jul 3, 2012#8 Originally Posted by
CPALK719 ↑ only problem i see about buying a used JDM front or rear, is that and im almost 100% sure, their colors aren't exactly the same as ours. well at least not all of there colors. so its going to run you a good amount for the front bumper from ebay and then your gonna have to pay to get it repainted.
i know they'll also be bending it when they place in a box to ship it as well...
True, extra for paint. Paint right now will cost you $129 at Maaco for a bumper.
They don't bend the bumper, one tab snapped off the bottom, but that was expected. They pack it really good and ship lighting fast, its Japan we're talking about haha. I vouch for her.
PM me if you want a pic ;)
yarisugiハワイ · Jul 3, 2012#9I don't think 2012 models would come out that soon yet. Good luck.
Lady JThread starterUnited States · Jul 3, 2012#10 Originally Posted by
Kioshi ↑ eBay has tons of 2012 RS aka SE in North America bumpers for sale (front and rear), used from Japan...
A LOT-
Dont get aftermarket...they will be a pain in the ass to fit...replica always are bad.
I thought about ebay,but what I want to know is if the fenderliners are differents as the older models are
KioshiFremont, CA · Jul 3, 2012#11 Originally Posted by
Lady J ↑ I thought about ebay,but what I want to know is if the fenderliners are differents as the older models are
There might be a little tucked in/flatter more than USDM bumpers. But you can tuck the fender liner, line up the hole at the bottom and put the plastic pin/ziptie through it. The bottom hole is the only concern you will have...thaqs my only concern when I got the bumper.
And guess what, you wont ever know till you do it...just ziptie the bottom hole and you're fine..it doesn't even show or poke out.
muffin_topMidwest · Jul 3, 2012#12The fender liners are substantially different between RS and L/LE. Mainly the shape of the front and the attachment points.
You will need the following:
Bumper Cover
Fog Lamps L+R
Fender Liners L+R
Upper Grille
Lower Grille
Fog Lamp Garnish L+R
Tow hook cover
All the hardware is the same, as well as the Toyota crest and reinforcements.
Sadly, this will not be cheap or easy.. :(
Lady JThread starterUnited States · Jul 3, 2012#13Thats what I was afraid of I knew about everthing else but was unsure,it is a lot to spend considering
12 yarisYork,Pa · Jul 3, 2012#14I saved alot of money by painting my lower grill,fog light covers the color of the car,I also painted the tops of my headlights...
CrankyOldManWest Michigan · Jul 3, 2012#15But if you buy a front clip...you get the whole shebang: bumper, lights, hood, engine, trans, etc.
KioshiFremont, CA · Jul 3, 2012#16 Originally Posted by
muffin_top ↑ The fender liners are substantially different between RS and L/LE. Mainly the shape of the front and the attachment points.
You will need the following:
Bumper Cover
Fog Lamps L+R
Fender Liners L+R
Upper Grille
Lower Grille
Fog Lamp Garnish L+R
Tow hook cover
All the hardware is the same, as well as the Toyota crest and reinforcements.
Sadly, this will not be cheap or easy.. :(
Could you explain with pictures HOW different it is between the RS and LE, possibly?
Because i have 2009 on my 2007. And the USDM bumpers were more bubbly than the JDM ones. JDM were flatter. For the 2012, the bumpers seem to have the same curvature for the USDM and JDM. Should be a direct swap...and like i said, might have to use a ziptie to bend and tuck the fender liner to line up with the hole/s.
Bumper swap is easier than changing the oil on the car or replacing headlight bulbs...mounting the US plates is also easier for 2012 owners than 2006-2011 owners, since JDM rear bumpers have a gap in the license plate mount area.
Expensive...maybe, depending on who or where you get it from.
CrankyOldManWest Michigan · Jul 3, 2012#17Like this?
Picture not included in this copy
KioshiFremont, CA · Jul 4, 2012#18 Originally Posted by
CrankyOldMan ↑ Like this?
Picture not included in this copy
Joking right?
Take a snapshot of a SE and an LE Yaris front fenders.
Prove someone who's already done the swap.
enviriCT · Jul 4, 2012#19I did some research on the 2012 NCP131 yaris, and there is a difference in part number for the fender liners on the G's/RS/SE vs BASE L/LE, BUT the difference is minor. The overall shape of the fender and the clip mounting spots look the exact same, but there is extra support for the G's/RS/SE bumper shown on the pic below circled in red.
BASE LINER: 53876‑52290+53875‑52290
RS/SE LINER: 53805‑52080+53806‑52070/53875‑52330+53876‑52320
Gazoo racing G's LINER: 53875‑WY010+53876‑WY010
Picture not included in this copy
would the bumper swap work without changing the fender liners? 99% sure yes. If you like to have the extra support of the liners, or the liners don't reach the holes of the new bumper, you can make a new hole in the very thin fender liner and zip-tie, like kioshi recommended, or just leave it alone.
Some other people just toss out the fender liner all together and slam the car with low offset rims to not deal with rubbing :)
Lady JThread starterUnited States · Jul 4, 2012#20Thanks for the options as I am thinking about it.
CPALK719Hollywood, Florida · Jul 4, 2012#21im sure the bumper the bumper will swap out. i was under the impression the headlights were slightly shaped different on the SE then on the l and LE models.
enviriCT · Jul 4, 2012#22nope. same shape.
muffin_topMidwest · Jul 4, 2012#23Keep in mind that Toyota doesn't always change the illustration to show variances in the actual part.
I will try to get pics of an L vs my SE so you can see the difference.
KioshiFremont, CA · Jul 5, 2012#24 Originally Posted by
muffin_top ↑ Keep in mind that Toyota doesn't always change the illustration to show variances in the actual part.
I will try to get pics of an L vs my SE so you can see the difference.
I await your pictures to be proven wrong sir 🙂
Fender liners don't touch fog light housings or anything, FYI. A CAI will hit the fender liner and protrude it out a little.
muffin_topMidwest · Jul 5, 2012#25 Originally Posted by
Kioshi ↑ I await your pictures to be proven wrong sir 🙂
Fender liners don't touch fog light housings or anything, FYI. A CAI will hit the fender liner and protrude it out a little.
I have pic of my SE, the L we have was parked on asphalt and a bit toasty to crawl under for pics.
What I'm trying to understand is why one would go through all the trouble to swap the whole nose and not get the proper fender liners? I feel trying to rig with zip ties, new holes or stretching is severely compromising the part. I had a liner come off my 93 Civic at 70 MPH and fold over my brand new fender. Major downer, all because I tried to get by with some cheap knockoff retainer clips from Auveco, instead of proper OEM parts. They fit poorly and caused the leading edge to come loose and get sucked up by the tire.
Point being the liner is a different for a reason, if Toyota could have made it the same to save a few bucks, trust me they would have. 👍
KioshiFremont, CA · Jul 5, 2012#26 Originally Posted by
muffin_top ↑ I have pic of my SE, the L we have was parked on asphalt and a bit toasty to crawl under for pics.
What I'm trying to understand is why one would go through all the trouble to swap the whole nose and not get the proper fender liners? I feel trying to rig with zip ties, new holes or stretching is severely compromising the part. I had a liner come off my 93 Civic at 70 MPH and fold over my brand new fender. Major downer, all because I tried to get by with some cheap knockoff retainer clips from Auveco, instead of proper OEM parts. They fit poorly and caused the leading edge to come loose and get sucked up by the tire.
Point being the liner is a different for a reason, if Toyota could have made it the same to save a few bucks, trust me they would have. 👍
You have one less thing to buy dude, if the fender is identical, why would you want a different part numbered fender? 🙄
Trust me, Ive done a 2007 to 2009 bumper swaps on my car. And i noticed what was different about fitment...just the fender needed to be tucked in a little and....$2 zipties tremendously helped that. You aren't rigging anything, seriously. You arent damaging the fender by putting a ziptie through it. I've driven my car with the swaps for several thousand miles (swap was done in March 2012) through dirt, snow, and water. My fender stayed on, its not going anywhere~
If the liner is different as you say, prove me wrong with a picture, please!
I can prove you that zipties tuck the fender liner perfectly without it protruding out or rubbing against the tires...
Show me a picture off of an L. I can get an SE pic on July 21st easily, just need to kneel down and snap a shot of where the holes are underneath :)
muffin_topMidwest · Jul 6, 2012#27Here is the point: Toyota does not use multiple part numbers for the Exact same part. Plain and simple. If two seemingly identical parts have different numbers then it is a substitution or it is indeed different. Toyota has one of the most enviable parts operations in the business, it did not earn that reputation by jamming the PDC's with redundant parts. Please don't let your experience with your car and it's fender liner skew these facts. Also, please don't let my recent membership and low post count belie my experience.
If you feel like not buying the correct parts to do the swap properly is good advice then okay, that's your opinion. I feel it's flawed given the spirit of trying to help someone with less experience looking for guidance on upgrading his/her car to the RS type nose. I suppose we will have to agree to disagree on that.
Here are some more facts to digest. The bumper and liner on L/LE trim grades are much shorter than SE/RS. One bolt on the inner edge where it bolts to the center shield is in the same place and the main portion over the wheelhouse is the same basic shape, that's where the similarity ends. Using my phone as a size reference, the bumper looks a good 3/4 iPhone length shorter/narrower on L/LE. It also appears that where the horizontal front portion bends up to form the half round lining is up higher since the bumper is much shorter.
Onto the pics..
Here is a pic of my driver side liner. Amusing that it is marked "RS" in the liner itself.
Picture not included in this copy
Here is a pic of a new 5 door LE.
Picture not included in this copy
Now, compare where the air guide is positioned on the RS versus this shot of the LE. The air guide is a good 3 inches furthur inward on the RS, thats how much difference there is in width of the liner. No amount of zip ties is going to strech/grow/distort the liner that much. No way. 🙄
Picture not included in this copy
Lady JThread starterUnited States · Jul 9, 2012#28appreciate the input guys,thanks and remember we are Toyota Family are we are here to support each other and build or knowledge base🙌
2012YarisSETallahassee, Fl · Jul 26, 2012#29 Originally Posted by
Lady J ↑ I prefer the Se model Bumper and would like to put it on my L they seem to be the same fitting apart from the grills and fog light inserts,my concern is mainly the fender liners as the older model RS fender liners were different from the regular liners.
Has anyone done this mod or have any insight?thanks
Have you considered just buying a SE or is this not an option at this time?
CPALK719Hollywood, Florida · Jul 29, 2012#30Not trying to condone doing things half ass, but i seriously doubt you need all that extra crap, just to install a bumper. stock fenderliners and those plastic shitty clips are universal for all 2012 yaris, i would assume. as well as alot of other cars with their different trim level all tend to interchangeable.
i mean common sense, if you ever did a front bumper swap its usually a few 10mm bolt to screw and unscrew and be done. i've done this when i decided to go from the evo 8 front to the evo 9 front end. i also have been continplating on changing my 96 del sol front bumper to 93-95 style.
Only problem i can see you having is getting the front repainted and buying the small plastic trim pieces for the fogs and thats it really.
Scubaru Stevecalgary · Jul 29, 2012#31 Originally Posted by
Kioshi ↑
now if we could only find the yaris hsd headlamps and the rs g's rear bumper!
muffin_topMidwest · Jul 29, 2012#32 Originally Posted by
CPALK719 ↑ Not trying to condone doing things half ass, but i seriously doubt you need all that extra crap, just to install a bumper. stock fenderliners and those plastic shitty clips are universal for all 2012 yaris, i would assume. as well as alot of other cars with their different trim level all tend to interchangeable.
i mean common sense, if you ever did a front bumper swap its usually a few 10mm bolt to screw and unscrew and be done. i've done this when i decided to go from the evo 8 front to the evo 9 front end. i also have been continplating on changing my 96 del sol front bumper to 93-95 style.
Only problem i can see you having is getting the front repainted and buying the small plastic trim pieces for the fogs and thats it really.
On the 12+ Yaris it is not that easy. It's just not. Again, both upper and lower grilles, fender liners, fog lamp garnishes, and bumper cover are all different. Not just a little bit different, totally not the same whatsoever! Sure, the clips and related hardware are identical but thats were it ends..
I've swapped bumpers on an Evo (easy) 96-98 and 99-00 Civics (not easy). I have not done a del Sol, but Honda like Toyota tends to change little brackets and retainers that add up to big $$ to make things fit properly. The Yaris is only slightly easier than a EK Civic in that the fenders themselves are the same, as well as the hood.
Originally Posted by
Scubaru Steve ↑ now if we could only find the yaris hsd headlamps and the rs g's rear bumper!
Heck, I'd settle for some RS LED tails!! 👍
12 yarisYork,Pa · Jul 29, 2012#33Will be installing a rear SE bumper cover on my LE,the front is not cost effective with all the other parts needed to swap,that's why I painted my
lower grill and fog light covers...
CPALK719Hollywood, Florida · Aug 1, 2012#34 Originally Posted by
muffin_top ↑ On the 12+ Yaris it is not that easy. It's just not. Again, both upper and lower grilles, fender liners, fog lamp garnishes, and bumper cover are all different. Not just a little bit different, totally not the same whatsoever! Sure, the clips and related hardware are identical but thats were it ends..
I've swapped bumpers on an Evo (easy) 96-98 and 99-00 Civics (not easy). I have not done a del Sol, but Honda like Toyota tends to change little brackets and retainers that add up to big $$ to make things fit properly. The Yaris is only slightly easier than a EK Civic in that the fenders themselves are the same, as well as the hood.
Heck, I'd settle for some RS LED tails!! 👍
as i've said i've done my evo, i have been continplating on doing my del sol, and i've taking my Rsx front bumper off many times when i owned it, with no problems. i honestly don't see anything hard with it. the undertray if the car even has one, which i havent checked yet, doesn't need to be on. i took mine off my evo probably the first year i purchase it. the plastic fenderwell liners, as someone else said are a pain in the ass, and if you get bigger wider wheels might as well just take them off as well.
technically speaking you dont need any of the plastics that everyone is refering to, in order to swap a bumper out. all is needed is the front bumper, the little mesh grill in and so fourth.
muffin_topMidwest · Aug 1, 2012#35 Originally Posted by
CPALK719 ↑ as i've said i've done my evo, i have been continplating on doing my del sol, and i've taking my Rsx front bumper off many times when i owned it, with no problems. i honestly don't see anything hard with it. the undertray if the car even has one, which i havent checked yet, doesn't need to be on. i took mine off my evo probably the first year i purchase it. the plastic fenderwell liners, as someone else said are a pain in the ass, and if you get bigger wider wheels might as well just take them off as well.
technically speaking you dont need any of the plastics that everyone is refering to, in order to swap a bumper out. all is needed is the front bumper, the little mesh grill in and so fourth.
I agree, taking the bumper cover off a modern vehicle is a relatively easy project.
Fender liners are a personal preference, I guess. I live in a state that can get a fair amount of snowfall, so fender liners are a must if its the daily. One of my Civics, the 99 EM1, spent most of its life in Florida/Georgia before the previous owner moved here. That car was very low and had its front liners removed early on for wheel clearance. Alot of work was needed to correct 80k miles of road sand, tar and whatever else that had eaten away the etch coat. The leading edges of both front door shells were sandblasted badly. Just nothing from stopping debris from damaging the paint in those areas. Besides that, it looks naked and unfinished without them. 🙂
CPALK719Hollywood, Florida · Aug 1, 2012#36 Originally Posted by
muffin_top ↑ I agree, taking the bumper cover off a modern vehicle is a relatively easy project.
Fender liners are a personal preference, I guess. I live in a state that can get a fair amount of snowfall, so fender liners are a must if its the daily. One of my Civics, the 99 EM1, spent most of its life in Florida/Georgia before the previous owner moved here. That car was very low and had its front liners removed early on for wheel clearance. Alot of work was needed to correct 80k miles of road sand, tar and whatever else that had eaten away the etch coat. The leading edges of both front door shells were sandblasted badly. Just nothing from stopping debris from damaging the paint in those areas. Besides that, it looks naked and unfinished without them. 🙂
yea, and i can understand then if your in the northern states, which gets snow and and they throw salt on the roads that can definetly destroy your exterior with either rot or rust.
I myself live in south florida, my undertray came off the first year i own my evo, when i installed bigger wheels onto the evo the fenderliners started to get eatten up from the tires rubbing. needless to say they arent a necessary here.
J.A.R.V.I.S.socal · Sep 1, 2012#37 Originally Posted by
Scubaru Steve ↑ now if we could only find the yaris hsd headlamps and the rs g's rear bumper!
sorry kneb question. the 2010 vitz front bumper shown in the link you posted will fit the 2012 yaris?