1.5Original postTampa · Jul 1, 2012#1Hey YW just need some help with my fog lights. I've had eBay fogs for quite some time but they just stopped working recently. They do not illuminate at all.
I did some diagnosis and I tested the power source and it is giving power and the fuse is not blown. Using my voltimeter I checked the power wire coming out from the relay and that wire is not giving any power. So going into the relay there is power but coming out from the relay there is no power. Does this sound like i blew the relay?
Replies 34
BilliamUSA · Jul 1, 2012#2Yep...sounds like the the relay. You can pick one up from Wal-Mart, Autozone etc., for about $5. Pick up some female spade connectors while you're there...as you'll need them for the new relay's 4 connections.
I think I have some of those plug-and-play ebay relays laying around. If you can wait a few days on the delivery you can have one.
JumpmanYarisSO. INDIANA · Jul 1, 2012#3Take a picture bro because I think I might have the same problem
1.5Thread starterTampa · Jul 1, 2012#4Billiam that would be awesome I have no problem waiting.
Jumpman ill get some pics up by tomorrow
JumpmanYarisSO. INDIANA · Jul 1, 2012#5 Originally Posted by
1.5 ↑ Billiam that would be awesome I have no problem waiting.
Jumpman ill get some pics up by tomorrow
Sweet appreciate that, thanks.
BilliamUSA · Jul 1, 2012#6 Originally Posted by
1.5 ↑ Billiam that would be awesome I have no problem waiting.
PM me your address and I'll make sure I have one.
auxmikeLI, New Yawk · Jul 1, 2012#7Did you guys use one of those black plastic aftermarket relays? I went the way of using the OEM Toyota part that plugs right into the cars relay panel. This way the dash light for the fogs comes on too. The OEM relay is only like $15 on Ebay. Hope you get back and running soon...
JumpmanYarisSO. INDIANA · Jul 1, 2012#8I sure hope and pray we have the similar problem hehe, because I checked the fuse box and all seem ok I haven't had the car diagnosed but I have a feeling this is the problem.
BilliamUSA · Jul 1, 2012#9 Originally Posted by
auxmike ↑ Did you guys use one of those black plastic aftermarket relays?
I did and it's been working fine for the last 2+ years. Sounds like his was just a dud.
1.5Thread starterTampa · Jul 1, 2012#10Yeah this was just an eBay relay. I didn't go the factory route.
BilliamUSA · Jul 1, 2012#11 Originally Posted by
1.5 ↑ Yeah this was just an eBay relay. I didn't go the factory route.
Gimme your addy
1.5Thread starterTampa · Jul 3, 2012#12sorry for the delay jumpman I will get that pic today
AltitudeColorado · Jul 3, 2012#13Agreed on the relay as mine had gone bad too.
1.5Thread starterTampa · Jul 3, 2012#14thanks guys i am a super noob with wiring/electrical..... + goes to - right? lol
1.5Thread starterTampa · Jul 3, 2012#15Here's the pics.
Picture not included in this copy Picture not included in this copy Picture not included in this copy Picture not included in this copy Picture not included in this copy The fuse again not shorted and the blue wire coming from the fuse box is connected to the power source and that power source registers 12.9v. The wire then runs into the loom and the loom spreads into 4 wires connecting to the relay. One of the red wires going in also registers 12.9v. The red wire coming out from the loom, next to the blue power wire, provides the power to the loom that spreads to the two housings. That red wire registers 0.00v.
5 attachments not included in this copy
ljming99Singapore · Jul 3, 2012#16Sorry but this may sound noob lol
Did you turn the switch for the fog lights on to trigger the relay, you could be measuring an open circuit which gives the 0 reading.
JumpmanYarisSO. INDIANA · Jul 3, 2012#17Where is that relay at ?
1.5Thread starterTampa · Jul 3, 2012#18 Originally Posted by
ljming99 ↑ Sorry but this may sound noob lol
Did you turn the switch for the fog lights on to trigger the relay, you could be measuring an open circuit which gives the 0 reading.
Check
Originally Posted by
JumpmanYaris ↑ Where is that relay at ?
Really jumpman? Its the big black box in pic 3 and 4 that says "relay"
BilliamUSA · Jul 3, 2012#19 Originally Posted by
1.5 ↑ Really jumpman? Its the big black box in pic 3 and 4 that says "relay"
Ha, ha....and you should have a new one soon. 😉
1.5Thread starterTampa · Jul 3, 2012#20👍
JumpmanYarisSO. INDIANA · Jul 3, 2012#21Lmao I am talking about where is it at in my car
1.5Thread starterTampa · Jul 4, 2012#22Ooooo LOL my bad.
Do you have factory installed fogs, mi fogs, or eBay fogs?
JumpmanYarisSO. INDIANA · Jul 4, 2012#23The wires are from MI and actual fog from eBay and I have HIDs in em, I am here standing next to the car scratching my head 🆘
1.5Thread starterTampa · Jul 4, 2012#24I think your setup is different. I think garm customized his sets so they use the factory plug and relay which plugs in to the fuse box under the Hood. Correct me if wrong. My setup is more basis and I ran thru my firewall instead of using the factory relay hookup.
JumpmanYarisSO. INDIANA · Jul 4, 2012#25Well I took some pictures but I'll post them when I finish my shower I am done with it I took the entire front end out. And might even sell the headlights for dirt cheap since it needs another harness and ballast.
1.5Thread starterTampa · Jul 4, 2012#26Cool I am not the best with wiring so maybe Scott or someone will chime in.
1.5Thread starterTampa · Jul 5, 2012#27Billiam you are a life saver LOL.
Thanks again man
BilliamUSA · Jul 5, 2012#28 Originally Posted by
1.5 ↑ Billiam you are a life saver LOL.
Thanks again man
I take it you got it....and it worked?
1.5Thread starterTampa · Jul 5, 2012#29Yup. I tried uploading a pic but my phone doesn't want to.
JumpmanYarisSO. INDIANA · Jul 5, 2012#30Cool, now I need to figure out wtf is wrong with my set
1.5Thread starterTampa · Jul 6, 2012#31lol you may have a relay issue as well but you have a different set up and I believe you're using the toyota relay correct?
JumpmanYarisSO. INDIANA · Jul 6, 2012#32 Originally Posted by
1.5 ↑ lol you may have a relay issue as well but you have a different set up and I believe you're using the toyota relay correct?
I really don't know because I didn't do the job my self
BilliamUSA · Jul 6, 2012#33 Originally Posted by
1.5 ↑ Yup. I tried uploading a pic but my phone doesn't want to.
Good deal. Make sure you have that relay secured so it doesn't move around and vibrate. That can potentially shorten the life of it.
1.5Thread starterTampa · Jul 6, 2012#34^ cool thanks for that advice
JumpmanYarisSO. INDIANA · Jul 7, 2012#35Dude I I am done with mine, fuse:checked, bulbs:checked, ballast:checked, wires:checked (they are getting power), relay:unknown if it has one. Would it be close to the on/off switch ?