Bump🙇
My new 2008 Absolutely Red 3 Door Yaris Project Car
175 posts · 77,098 views · page 3 of 4
Replies continued
So, the used radiator actually self-healed. I believe that the gasket between the top plastic tank and the aluminum fin section had shrunk a bit from being used, then drying out and sitting on a shelf for a year or so. I think that re-wetting and heating it swelled it back to shape. For now I am going to run with it as is.
not much longer and the wifey will be happy since you will have AC again 👍
Just sweating my butt off down here while waiting for some guy from Maine to ship me some AC parts.Originally Posted by fnkngrv ↑not much longer and the wifey will be happy since you will have AC again 👍
I now own the complete rig for evacuating, testing, and charging A/C systems, so I am ready to get her's back running.
ouch. I have an industrial a/c unit just sitting here at my house unused still in shipping crates if you want it LOL
Originally Posted by enviri ↑ouch. I have an industrial a/c unit just sitting here at my house unused still in shipping crates if you want it LOL
There you go, then I can do this:
Picture not included in this copy
This thread is awesome!! She's a beauty~
kinda late to the punch here - but Scott, could you PM me about the core supports? i cant seem to figure out a few things about them - like if the sedan and HB share the same pieces or not. i can find all 4 pieces for the sedan, but not for the HB.
Funny story on that - I was scrambling to get the parts ordered before vacation and I did a buy it now on an ebay listing for all 4 of the parts for the radiator support structure for $100 (which is about 1/3 the price of buying the 4 from an online Toyota parts retailer). When I got back from vacation and opened the box I noticed that something looked a little different with the new ones. I went ahead an mounted them and everything fit OK. Then, when I went to put the headlight on, I realized that the headlight brackets on the radiator supports were in the wrong place (making the radiator tab of the headlight sit almost 1" too high. I went back to check my ebay purchase and noticed that in the listing it should compatibility with the 06-11 liftback and sedan, but the title of the listing was "2006-2011 Yaris Sedan Radiator Support". Somehow I missed that and didn't check the part numbers versus the EPC.Originally Posted by mr_miles ↑kinda late to the punch here - but Scott, could you PM me about the core supports? i cant seem to figure out a few things about them - like if the sedan and HB share the same pieces or not. i can find all 4 pieces for the sedan, but not for the HB.
As it turns out the LB and Sedan share the bottom part. The sides, if purchased complete with the headlight brackets attached, are different, but if you purchase them without the headlight brackets, then they are the same. In that case you buy the headlight brackets separately. So, for that part I cut off the wrong headlight brackets and fabricated my own (since they are a simple L-shaped piece). The top is also different, but the primary difference is two extra support tabs (that have to be removed for the liftback) and two bumper clip holes in the wrong place (which can easily be redrilled for the liftback).
So, the bottom line is they top 3 parts are different, but can be easily made to work to save some serious coin. When I have a chance I will post the correct part numbers for the 4 liftback parts for you, in case you want to save the modification work to make the cheaper Sedan ones work.
oh dang, I almost hit the "buy now" button one one of those bids. i knew the bottom piece was the same, but wasn't sure about the sides, and was pretty sure the top was different.
That would explain why the drivers side side mount on mine is cut. i bet the guy who fixed it before me did the same thing.
That would explain why the drivers side side mount on mine is cut. i bet the guy who fixed it before me did the same thing.
...
May we send our cars to your home for servicing? :)
You sure get work done fast and right!
You sure get work done fast and right!
Originally Posted by yarisugi ↑May we send our cars to your home for servicing? :)
You sure get work done fast and right!
Sure. Now that I have the A/C equipment, I might as well get my money's worth out of it.
Well done 👏 . How'd you like to purchase our Barcelona Red sedan and turn it into a El Camino or Ranchero ? 😁
Maybe you should open your own shop that specializes in the Yaris on the east coast . Like a walk in clinic for damaged or sick 🤮 Yarii .
Originally Posted by CTScott ↑Crashy2 - Now 33% Safer, 50% Brighter, and 100% Cooler...
Picture not included in this copy
I like the light and shadow of the picture.👍
So, after a week with working AC, I decided that she needs the rest of the creature comforts that my 09 has, so this weekend I ordered everything needed to upgrade her to having power mirrors, power windows, power locks with remote entry, and my Scion IQ hatch opening switch mod.
CT , what do you look for in the window of the AC line to tell of a possible leak ? Would you loose it all at once or over a period of time if a slow leak . Seems fine for now . Thanks again and very nice work .
The sight glass is pretty limited. seeing liquid with bubbles running through there says that the system has at least some Freon in it. To really check it you want to check the pressure of the system, which can be done with an AC gauge set or with the Techstream tool.Originally Posted by Hershey ↑Ct , what do look for in the window of the AC line ? What tells of a possible leak . Thanks again . Seems fine for now .
Looks to have a bubble like that of a level . Did notice the plastic prongs that snap in place at the top of the radiator on the passenger side has slight play in it . They're not broke off . Should that be a concern ? Or be o.k.?
That's where the condenser snaps on the radiator. They typically snap on pretty tightly, so I would check to see if the condenser is bent or if it is simply not snapped all the way on.Originally Posted by Hershey ↑Looks to have a bubble like that of a level . Did notice the plastic prongs that snap in place at the top of the radiator on the passenger side has slight play in it . They're not broke off . Should that be a concern ? Or be o.k.?
Quite sure it's snapped all the way on . Will look into it .
Pics of plastic snap is here , Another Yaris casualty . Post #35 .
Thanks for your input . Here's a few chocolate chip cookies in return . Enjoy .
1 attachment not included in this copy
lol i done the two tone thing. i had my friend install two new fenders and front bumper after my first accident. it was a like a year later when a car stopped short and i rear ended her keyword "HER" lol. so the insurance got me a new bumber and had the body shop work on it. my fenders are still black since they werent touched in the accident. Here is a pic i just took when i was in PA. notice the bumber is painted. it was fixed again after another accident that was taken cared by the insurance and body shop.Originally Posted by 1.5 ↑that was quick. You should keep it flat black two tone
Picture not included in this copy
WOW she looking amazing. the paint job looks amazing. it looks like a pro did it with the finest paint in a paint booth but u used spray cans 🙇 AMAZINGOriginally Posted by CTScott ↑As of this morning she is legal. Emissions was no problem yesterday, so this morning I swung by DMV and got her a shiny new set of plates.
Picture not included in this copy
Picture not included in this copy
Thanks. It actually looks great from about 15 feet away. From 3 feet away it is pretty obvious that I shot it will rattle cans (lots of orange peel). I had an issue with shooting the clear too soon on the hood and it reacted with the base coat, so I had to sand the whole hood down and start again. In doing so I really gouged the metal, so the hood has a lot of imperfections. I figured that it looks good enough for now for driving her around without it looking too bad.Originally Posted by yaris_ninja ↑WOW she looking amazing. the paint job looks amazing. it looks like a pro did it with the finest paint in a paint booth but u used spray cans 🙇 AMAZING
I am currently shopping for an HVLP painting system and once I pick one up, I'll reshoot the bumper and hood (and probably replace the hood again, since they are only $65 for a new primed one).
Oh, and she has 38K miles on her original Goodyear Eagle LS tires, so today I ordered a new set of Hankook Ventus V2 Concept H437 tires on a set of Drag DR41 white wheels from my favorite wheel and tire guy at fourby100.com
Wow!! Now I see were the answers to my questions come from. Wow.
thats great. when u get that paint system will it help u do more of a pro job? if it does i will be happy to drive up and my yaris front and rear end painted. the only thing is that my yaris has the flakes in the paint.Originally Posted by CTScott ↑Thanks. It actually looks great from about 15 feet away. From 3 feet away it is pretty obvious that I shot it will rattle cans (lots of orange peel). I had an issue with shooting the clear too soon on the hood and it reacted with the base coat, so I had to sand the whole hood down and start again. In doing so I really gouged the metal, so the hood has a lot of imperfections. I figured that it looks good enough for now for driving her around without it looking too bad.
I am currently shopping for an HVLP painting system and once I pick one up, I'll reshoot the bumper and hood (and probably replace the hood again, since they are only $65 for a new primed one).
Theoretically it will help. I just have a mantra that says that if I can buy a tool for less than what someone would charge me to do a job, I do so.Originally Posted by yaris_ninja ↑thats great. when u get that paint system will it help u do more of a pro job? if it does i will be happy to drive up and my yaris front and rear end painted. the only thing is that my yaris has the flakes in the paint.
I have a buddy who was an auto body guy in his past life and he said that he'll teach me how to use it (I think he really just wants to use it on his 69 Firebird that he is restoring).
lol thats funny. I still say u did a amazing job the first time. it just takes time lots of time lol.Originally Posted by CTScott ↑Theoretically it will help. I just have a mantra that says that if I can buy a tool for less than what someone would charge me to do a job, I do so.
I have a buddy who was an auto body guy in his past life and he said that he'll teach me how to use it (I think he really just wants to use it on his 69 Firebird that he is restoring).
DR-41 15x7 +10 or +40? All white or white with machine lip? I can't wait to see it. :)
15x7 +40, All-white.Originally Posted by yarisugi ↑DR-41 15x7 +10 or +40? All white or white with machine lip? I can't wait to see it. :)
So impressive. Hat's completely off.
..
Ebay Power Mirrors arrived today.
This has to be one of the simplest upgrades to do. All of the wiring is in place on non-power Yaris, so you simply swap the mirrors, pop the switch into the dash and plug the connector (that is taped to the top of the under-dash fuse box) into it. Turn the ignition switch on and watch them move.
The mirrors were $31 each shipped and are new aftermarket ones. The power mirror switch I picked up off Ebay for $24.
Unboxing the new ones:
Picture not included in this copy
Swapping the existing red covers onto the new ones (they come with unpainted black ones):
Picture not included in this copy
New mirror on and plugging connector into the existing wiring:
Picture not included in this copy
Switch installed and mirrors operational:
Picture not included in this copy
This has to be one of the simplest upgrades to do. All of the wiring is in place on non-power Yaris, so you simply swap the mirrors, pop the switch into the dash and plug the connector (that is taped to the top of the under-dash fuse box) into it. Turn the ignition switch on and watch them move.
The mirrors were $31 each shipped and are new aftermarket ones. The power mirror switch I picked up off Ebay for $24.
Unboxing the new ones:
Picture not included in this copy
Swapping the existing red covers onto the new ones (they come with unpainted black ones):
Picture not included in this copy
New mirror on and plugging connector into the existing wiring:
Picture not included in this copy
Switch installed and mirrors operational:
Picture not included in this copy
4 attachments not included in this copy
I really don't care much for the power mirrors (though I do have them in my RS Yaris). I am much more of a fan of the power windows and the power locks (as I pretty much use one or the other on a regular basis).Originally Posted by CTScott ↑Ebay Power Mirrors arrived today.
The power mirrors are for me pretty much a set it and forget it kind of deal. Unless I go to the car wash ... in which case I always seem to have to readjust them.
But I am looking forward to this thread in the future as I am just amazed at what you have done to that car. 👍
Those old tires for sale? :D
I am going to use the white painted steelies as my Winter wheels (and will wrap them in a set of rally racing snow tires), but the Eagle LS tires will be coming off.Originally Posted by sex ↑Those old tires for sale? :D
You sure are doing a ton of work on Crashy 2. Since you want to make Crashy 2 a off road car you should spray the underside to avoid rusting.
Exactly. I did my daily driven 09 with Herculiner this past Winter and it worked great as both an undercoating and sound reducer, so I will definitely be doing this one as well.Originally Posted by yaris_ninja ↑You sure are doing a ton of work on Crashy 2. Since you want to make Crashy 2 a off road car you should spray the underside to avoid rusting.
Do you do the undercoating yourself? If you do it would nice to stop by to my yaris and miata done. I am not sure how it would cost. i will look online for myself.
i can't wait to see the progress and the final result!
Very interesting Thread Indeed! Thats the satisfaction in building a car in the end you'll love your car more than anything else i guess hehehe
...
Very nice ... I have hankook tires too. I really like them. May she have many safe miles ahead. We all know she has used up one life already.
love it!