packetraceOriginal postQuebec · Jun 9, 2012#1So today I installed a grounding kit on my yariii...I did only 2 ground points + starter + body ground
I got the kit from MicroImage...it is a NRG red grounding kit...
Here is a pic of it installed as weel as the radiator hose from MI
Picture lost · i1199.photobucket.com
I redid the main body ground, the starter ground, one ground on the valve cover and one on the throttle body...
I have to do one other on the valve cover and the alternator one...
DO you have idea of other ground point I should use ?😛
Replies 17
packetraceThread starterQuebec · Jun 9, 2012#2Throttle body ground
Picture lost · i1199.photobucket.com
packetraceThread starterQuebec · Jun 9, 2012#3First Valve cover ground
Picture lost · i1199.photobucket.com
GolddeenohColumbia, SC · Jun 10, 2012#4back on the fire wall where the ECU is bolted up on the lower right bolt that is a stud on the fire wall and up front where the headlight are grounded to the frame. that is at least where i put 2 of mine
auxmikeLI, New Yawk · Jun 10, 2012#5What are the benefits of doing this guys? Looks like Medusa's hair!
As an electronic technician. Red to me is always a power source like +12 volts not ground. 😁
GolddeenohColumbia, SC · Jun 10, 2012#7most of the electrical components, even the spark plugs need a ground to work. In theory making the ground on the car better will increase system responsiveness and improve ignition spark, it should also insure that at higher revs that the system electrical will not fail. I'm sure CTScott or Cali Yaris can give a more detailed description on the benefits but it is small unless you have done something drastic like an engine swap. I routed my wires differently than packetrace, I'll post a pick of it here in a few.
packetraceThread starterQuebec · Jun 10, 2012#8 Originally Posted by
BLH ↑ As an electronic technician. Red to me is always a power source like +12 volts not ground. 😁
I am an electronic technician too...I know what you mean and it pisses me when someone use red for ground....but here it is only an esthetic reason....I hate the black wires in my engine bay thats why I went for red....
packetraceThread starterQuebec · Jun 10, 2012#9 Originally Posted by
Golddeenoh ↑ most of the electrical components, even the spark plugs need a ground to work. In theory making the ground on the car better will increase system responsiveness and improve ignition spark, it should also insure that at higher revs that the system electrical will not fail. I'm sure CTScott or Cali Yaris can give a more detailed description on the benefits but it is small unless you have done something drastic like an engine swap. I routed my wires differently than packetrace, I'll post a pick of it here in a few.
Yeah I am very curious to see....I will do the ECU ground...I had to do it but your reinforces my idea:D
what are your other ground ? 😉
GolddeenohColumbia, SC · Jun 10, 2012#10engine block, fender ground, ECU frame, Head lamp Ground, Throttle body,and CAI at its frame contact.
sorry for the dark photos it is rain here and I just ran outside and took these real quick for ya'll
packetraceThread starterQuebec · Jun 10, 2012#11interesting :) Ill definetely do the ECU one and the headlamp one...
GolddeenohColumbia, SC · Jun 10, 2012#12"the heal lamp one was easy, the screw that went through the grounding screw sticks out of the other side so i just used those threads and a nut from the kit to put it on."
^ Bad idea Don't do that ground
packetraceThread starterQuebec · Jun 10, 2012#13 Originally Posted by
Golddeenoh ↑ the heal lamp one was easy, the screw that went through the grounding screw sticks out of the other side so i just used those threads and a nut from the kit to put it on.
goood idea😉
GolddeenohColumbia, SC · Jun 12, 2012#14DO NOT DO THIS GROUND!! Doing this ground will result in the car turning off when you either turn on the fog lights or attempt to turn on the head light/ high beams. The car will completely turn off, no electrical function at all, no signal lights, nothing. the engine will shut off. if this happens disconnect the extra ground(double ground) disconnect the negative, then reconnect the negative and the car will be fine.
Attached picture not available
auxmikeLI, New Yawk · Jun 12, 2012#15I'm not doing any of this stuff. If this was such a great Idea I think Toyota would have sold it off the lot like that.... Just my .02.
CTScottUSA, CT · Jun 12, 2012#16Everything on the chassis is a common ground. It sounds like you have something wired wrong with your lights, where you thought you were connected to bare metal as a ground there, but really are insulated to the ground with paint.
GolddeenohColumbia, SC · Jun 12, 2012#17probably do with the lights as much trouble as i had installing the fog lights. it is the same grounding bolt as the head lights and fog lights. once i removed that ground I had no problems. the fog lights haven't been and issue until i put this ground kit on and then it wasn't until i used the lights that it went all funny business.
packetraceThread starterQuebec · Jun 13, 2012#18its just the hazard...
i had something like this..it was only the main ground pole who was not making contact with the negative of the battery....I grinded the NRG main pole....never had this problem since that...
it is not the headlight ground that caused that...the body is the ground...it cant cause that problem :)