after work on Saturday, i went out to my car and saw a scratch. A-hole didn't even leave an apologetic note...hard to see, but towards the middle of the pic.
1 attachment not included in this copy
16 posts · 4,247 views
1 attachment not included in this copy
1 attachment not included in this copy
I have never seen a pro wet sand with anything other than his hand.... and in that small of an area you rub that out with some rubbing coumpound in a few minutes, would not take long at allOriginally Posted by Kaotic Lazagna ↑i don't have those power tools for wet sanding and buffing (i watched the pros do it on my car before, and don't think elbow grease will be able to do it).
so i should just buy either Scratch-X or some rubbing compound, then wax?Originally Posted by Black Yaris ↑I have never seen a pro wet sand with anything other than his hand.... and in that small of an area you rub that out with some rubbing coumpound in a few minutes, would not take long at all
+1Originally Posted by Black Yaris ↑I have never seen a pro wet sand with anything other than his hand.... and in that small of an area you rub that out with some rubbing coumpound in a few minutes, would not take long at all
damn, thats IS deep. yeah, if you can see the metal/primer, its pretty deep. but as with any other paint restoration, the trick is to go with the least abrasive action first, and work your way up to the real gritty and expensive stuff. try scratch-x + your arm first. if that doesnt work, take it to a pro. if it does work, you saved yourself some $$...Originally Posted by Kaotic Lazagna ↑what's the definition of super-duper deep? this scratch is almost like the rock chips on my hood. does that fall under super-duper deep? i guess my arm will be dead for a day...heh.
a couple parts of the scratch is that deep. the rest i think rubbing compound or Scratch-X will work just fine on. the deeper areas of this scratch is whitish-gray. oh well, there's another light scratch on my car, so i'm going to buy some Scratch-X when i have the time.Originally Posted by static808 ↑damn, thats IS deep. yeah, if you can see the metal/primer, its pretty deep. but as with any other paint restoration, the trick is to go with the least abrasive action first, and work your way up to the real gritty and expensive stuff. try scratch-x + your arm first. if that doesnt work, take it to a pro. if it does work, you saved yourself some $$...
--B