Yarisworld Archive

Factory armrest install DIY.

17 posts · 13,627 views

PetersRedYarisOriginal postThe Black Hills of South Dakota · Apr 10, 2007#1
Toyota factory armrest install.
Just in case anyone needs to know how to do this, it’s simple.

Fold and slide both seats all the way to the front which will expose the seat tracks. Place the wire retainer end under the seat track as shown starting with the drivers side followed by the passenger side.
Picture lost · img3.freeimagehosting.net

Picture lost · img3.freeimagehosting.net

Picture lost · img3.freeimagehosting.net


Place the armrest base in the factory cup holder with the screw hole facing the back.
Picture lost · img3.freeimagehosting.net


Press the wire forward over the base and into the groove. This holds the base firmly in place.
Picture lost · img3.freeimagehosting.net


Place the armrest over the base and insert the screw to hold it in place.
Picture lost · img3.freeimagehosting.net

Your done. Simple!

Replies 16

OxyG3nEMontreal , Quebec , Canada · Apr 10, 2007#2
i have it but since i have the short shifter its not very usefull lol the arm is to high
brickhardmeatInner City, Dallas · Apr 10, 2007#3
Thank you for posting this!!!! I am planning to change my suto shifter bulb this weekend and I have been struggling to figure out hoe the wire part came out. Looks like it just kind hooks under there. Thanks!!!😉
Black YarisToledo, OH · Apr 10, 2007#4
still just looks like that would be in the way... must be an lazy auto thing
brickhardmeatInner City, Dallas · Apr 10, 2007#5
You got it. Lazy as fuck. 👍
churpTropical Minnesota · Apr 10, 2007#6
🤘 Lazy and old as dirt 🤘
AlphaFoxSpringfield, Mass · Apr 12, 2007#7
dont try this with it all assembled, like i did. you need to take it all apart to get the wire in the holes. I just wish it wasnt so darned high!! I would like to lower it like 2", not sure who designed it but its just doesnt feel right..
PetersRedYarisThread starterThe Black Hills of South Dakota · Apr 12, 2007#8
Exactly, the new one I got is about 2 inches lower. Love it!
brickhardmeatInner City, Dallas · Apr 12, 2007#9
Originally Posted by PetersRedYaris ↑
Exactly, the new one I got is about 2 inches lower. Love it!
Which one did you go with? The one on ebay with the storage box or the JDM? or other?
PetersRedYarisThread starterThe Black Hills of South Dakota · Apr 12, 2007#10
The ebay one, like this one.



Got it from Thailand in less than a week. Fits great, lower elbow rest with better padding, and of course storage. I recommend it.
brickhardmeatInner City, Dallas · Apr 12, 2007#11
I'm still thinking about that one. I might end up with one myself. Thanks.
MudBugAZ, USA · Apr 13, 2007#12
Originally Posted by PetersRedYaris ↑
The ebay one, like this one.

Picture lost · img3.freeimagehosting.net

Got it from Thailand in less than a week. Fits great, lower elbow rest with better padding, and of course storage. I recommend it.


Pic no worky
BailOutReno, Nevada, USA · Jun 4, 2007#13
Thank you for this DIY, Peter. I just used it to install a second-hand factory armrest after I couldn't quite puzzle out the retaining clip.
cali yarisCanoga Park, CA · Jun 5, 2007#14
can you throw up a link to the one shown on the previous post? I went on eBay and saw several choices, and I'm sure some of them are not as nice as that.
MeadLBC · Jun 5, 2007#15
The armrest was a selling point vs the Fit, I drive long distances and it's super handy, even my passengers use it.
MeadLBC · Jun 5, 2007#16
Originally Posted by cali yaris ↑
can you throw up a link to the one shown on the previous post? I went on eBay and saw several choices, and I'm sure some of them are not as nice as that.
I would go with OEM, it looks and fits the interior's desgin better IMO
poratnirisrael · Jul 27, 2012#17
How did you installed it? do you need to drill holes?