Anyone know which of the 333 pages of electrical shit in the factory repair manual contains the ECU pinout off the top of their head? Or does anyone have the pinout for this car lying around? I can't be the only one looking to tune it.
ECU pinout
78 posts · 37,069 views · page 1 of 2
Replies 77
Nevermind. Got it.
What are you trying to install?
Not trying to install anything just yet, but there is a company working on something pretty nifty.
interesting
Hmm, piggyback or standalone? 😎
hmmmmmmmmmmm....
texas instruments? 🤷
(thats sarcasm, bricklikesmeat)
(thats sarcasm, bricklikesmeat)
Picture not included in this copy
There making a super calculator and they wanted to make it moble so there putting it in the yaris idk what it has to do with the ecuOriginally Posted by Chris07LB ↑texas instruments?
Piggyback or standalone... there is the trillion dollar question. I guess it all depends on how finnicky this car's ECM decides to be.
Tuning options are coming folks.
Tuning options are coming folks.
GO CHINO, GO!!
1 attachment not included in this copy
The ideal solution would be a unit that is fully programmable, and maintains OBD functionality. You are a true pioneer Chino. 👍Originally Posted by ChinoCharles ↑Piggyback or standalone... there is the trillion dollar question. I guess it all depends on how finnicky this car's ECM decides to be.
Tuning options are coming folks.
where is the pinout of ecu?.. do you mind sharing it.. I was trying to look for it but to no avail.Originally Posted by ChinoCharles ↑Nevermind. Got it.
Thank you,
Lot of info and locations shown here.. good to have anyway - http://www.badaces.com/punch/2007_Ya...pair%20Manual/
We need to get a downloadable manual up and running again.
Chino...
+10
you get another +93,584 if it actually works
👏 👏 👏 👏 👏 👏 👏 👏 👏 👏 👏 👏 👏 👏
😈
+10
you get another +93,584 if it actually works
👏 👏 👏 👏 👏 👏 👏 👏 👏 👏 👏 👏 👏 👏
😈
Sweet Graphic!!Originally Posted by Chris07LB ↑GO CHINO, GO!!
There is a lot that should happen before a piggyback or standalone should be implemented, but at least we will know if it can or cannot be done. If it can be done, it goes on the list.
All motor FTW.
All motor FTW.
Originally Posted by ChinoCharles ↑
All motor FTW.
Ahahahahahaha!!!!!!
Spend several thousand dollars just you get your ass handed to you by someone who bolts a supercharger on! 😆
On a side note. If you read the latest issue of Siphon you will see that the Tein Yaris uses a camcon II. They made 106WHP so perhaps its time to revisit that whole idea.
Just with the Camcon II?
What did they revise from the original?
What did they revise from the original?
They had a header, and pretty much no exhaust. They usually run a supercharger but took it off for the competition so there was a short stubby intake pipe with a large filter.Originally Posted by ChinoCharles ↑Just with the Camcon II?
What did they revise from the original?
I really need to get that damn mag. What is different about the second Camcon from the first?
Bill, this ones for you.
Picture not included in this copy
Bill, this ones for you.
Picture not included in this copy
1 attachment not included in this copy
Tell us more friend.. tell us more!Originally Posted by ChinoCharles ↑I really need to get that damn mag. What is different about the second Camcon from the first?
Bill, this ones for you.
Attachment 4201
1 attachment not included in this copy
They are still developing that ITB kit, but at $1000 less than the ZPI turbo I'd be a lot happier to get this. $2500 including a full, pre-tuned standalone. First of all, you can spend the $1000 doing a proper clutch system to handle the increased power. Second, you have more tuning capabilities because your extra power isn't dependent on your car hitting a certain RPM.
Actually, the guy who owns the xA that is being used to develop the kit moved to this after having a bolt-on supercharger and realized the supercharger had caused a bit of blow-by. Scary. He ended up having to buy brand new pistons and rings.
You could go turbo and internals on top of a setup like this for a Corvette-destroying Yaris. You're probably talking 10 grand worth of work, but who knows? Maybe we will see it one day.
Actually, the guy who owns the xA that is being used to develop the kit moved to this after having a bolt-on supercharger and realized the supercharger had caused a bit of blow-by. Scary. He ended up having to buy brand new pistons and rings.
You could go turbo and internals on top of a setup like this for a Corvette-destroying Yaris. You're probably talking 10 grand worth of work, but who knows? Maybe we will see it one day.
http://www.homemadeturbo.com/tech_pr...itb/index.html
WEEEEEE.
Could this still be done on a drive-by-wire?
WEEEEEE.
Could this still be done on a drive-by-wire?
interesting... very interesting indeed
Schweet!
I take back the "all motor sucks" comment. I was zipping around earlier and if you could get to say 120whp and change the gearing in the trans the Yaris would be insane fun.
I knew a guy with a old school VW and he had a trans from another model that had a super close ratio and a crazy high gear. Granted the thing would redline at 90MPH it was a blast to fly around in.
I was also surprised to find that even the stock Yaris can get some scratch in 2nd. It very well might have more to do with the crappy suspension but I was still impressed.
I know nothing of the Camcon II. No idea if it works or what changed.
I knew a guy with a old school VW and he had a trans from another model that had a super close ratio and a crazy high gear. Granted the thing would redline at 90MPH it was a blast to fly around in.
I was also surprised to find that even the stock Yaris can get some scratch in 2nd. It very well might have more to do with the crappy suspension but I was still impressed.
I know nothing of the Camcon II. No idea if it works or what changed.
someone find a bike that has ITB on DBW STAT
HAHA, I gave Joe the bug!
Ready for this? The new Yamaha R1 definitely has ITB's and DBW. The SV650's may have it too. I'll look into it.
Ready for this? The new Yamaha R1 definitely has ITB's and DBW. The SV650's may have it too. I'll look into it.
The bike ITB retrofit to a car has been around for awhile. I know that several Neons where running around with them. There was a big problem though. No MAP signal since there was no plenum. The other thing is that the Neon had an aluminum intake manifold so cutting the runners down and fabricating a mounting plate for the ITB's was worlds easier than the Yaris since you will need to have a flange cut and have the short runners and injector bosses.
There a whole shit ton of reasons that this is a bad idea.
There a whole shit ton of reasons that this is a bad idea.
And another even bigger shit load of reasons it is a good idea. It just needs some R&D time on our carOriginally Posted by acrbill ↑
There a whole shit ton of reasons that this is a bad idea.
O yeah? Lets here the good ideas.Originally Posted by Black Yaris ↑And another even bigger shit load of reasons it is a good idea. It just needs some R&D time on our car
I guess I don't understand the motivation here. They aren't going to offer some gigantic HP gains. They will be nearly unstreetable. The stock ecu is not a good option for several reasons.
One thing to think about is how does the drive by wire system work? Is the gas pedal essentially the throttle position sensor? If that is the case then it might actually make things easier. All you would need to figure out is how to mount a throttle cable to the stock pedal, which shouldn't be too difficult.
I would look into building a short runner intake manifold with a plenum box. It should offer nice gains and retain driveability.
For someone who obviously has a tight budget for mods it seems odd that you keep wanting to blaze new trails. Inherently that means you are going to have a much larger cash outlay for unproven results.
I know several people who have had all sorts of fancy one off bits built. The difference is that they had a lot of disposable income, and none where happy in the end.
Also, if you are so hot and bothered to tune your Yaris you should look into building a megasquirt. Its right up your alley since its super cheap and requires more time than money to get the best results.
Once you figure that out then you can look into stuff like ITB's since you will have a way to make them work on your application.
The motivation is simply to literally try and think of everything you could possibly do to this car. You have to know your options. Would the retrofit be expensive? Sure. Impossible? Nothing is impossible. Work with good mechanics and you'll find that to be the case. I appreciate your concern, but nobody is coming out and saying "hey, I'm doing this." We're just learning.
you will actually spend $2500 for the itb's before saving up another $1000 and go for the proven turbo kit???Originally Posted by ChinoCharles ↑They are still developing that ITB kit, but at $1000 less than the ZPI turbo I'd be a lot happier to get this. $2500 including a full, pre-tuned standalone. First of all, you can spend the $1000 doing a proper clutch system to handle the increased power. Second, you have more tuning capabilities because your extra power isn't dependent on your car hitting a certain RPM.
Actually, the guy who owns the xA that is being used to develop the kit moved to this after having a bolt-on supercharger and realized the supercharger had caused a bit of blow-by. Scary. He ended up having to buy brand new pistons and rings.
You could go turbo and internals on top of a setup like this for a Corvette-destroying Yaris. You're probably talking 10 grand worth of work, but who knows? Maybe we will see it one day.
why would you do that? you can make your own itb's, of you can get the wiring figured out for less than that. why not get somebody to make a intake manifold and pair it with a bigger tb and go from there?
Read the whole thread before you post.Originally Posted by joey1320 ↑you will actually spend $2500 for the itb's before saving up another $1000 and go for the proven turbo kit???
why would you do that? you can make your own itb's, of you can get the wiring figured out for less than that. why not get somebody to make a intake manifold and pair it with a bigger tb and go from there?
i did and you said you would go with this before going with ZPI's turbo kit because some kid blew his piston rings after supercharging his XA.Originally Posted by ChinoCharles ↑Read the whole thread before you post.
i know you were asking about ecu pinouts for some kind of engine management but in the thread you posted the pic of the itb's and themn said your comment.🙂
I also said I would look into swapping much CHEAPER ITB's from, say, a wrecked bike.
k good luck with that!Originally Posted by ChinoCharles ↑I also said I would look into swapping much CHEAPER ITB's from, say, a wrecked bike.
will you be increasing the compression ratio or keeping it at 10.5:1?
VTEC owns us.
Still, those are decent gains for one cheap setup. Notice that is without a tune! 110 octane is a little crazy, but still... looks good so far.
Still, those are decent gains for one cheap setup. Notice that is without a tune! 110 octane is a little crazy, but still... looks good so far.
k good luck with that!I will be going to bed shortly.
will you be increasing the compression ratio or keeping it at 10.5:1?
That's not without a tune. Otherwise the vtec crossover wouldn't be lowered and you can't just drop in 440cc injectors and expect your car to run right.Originally Posted by ChinoCharles ↑VTEC owns us.
Still, those are decent gains for one cheap setup. Notice that is without a tune! 110 octane is a little crazy, but still... looks good so far.
I will be going to bed shortly.
Thats with a Hondata ECU. The fact that they are running that much octane on stock compression means they have an extremely aggressive timing curve.Originally Posted by Dragonacc ↑That's not without a tune. Otherwise the vtec crossover wouldn't be lowered and you can't just drop in 440cc injectors and expect your car to run right.
Please don't waste your time with ITBs on this engine.
👍Originally Posted by largeorangefont ↑Please don't waste your time with ITBs on this engine.
I actually use my car. Dunno about this kind of a change. Not for me. I like this car for the good gas mileage and it takes 87 at that and runs fine.
quote "some people think yaris is a race car"
👎
but anyway have fun
quote "some people think yaris is a race car"
👎
but anyway have fun
Yeah not too many people like to take it ITB... But ChinoCharles is a bit of a masochist, and it would certainly be interesting to see what he comes up with.Originally Posted by largeorangefont ↑Please don't waste your time with ITBs on this engine.
He would be better off spending the money on an engine swapOriginally Posted by eTiMaGo ↑Yeah not too many people like to take it ITB... But ChinoCharles is a bit of a masochist, and it would certainly be interesting to see what he comes up with.
Perhaps, but that's against his modding philosophy, which I guess could be summarized as "when your car's engine gives you lemons, make lemonade" 😛
Everyone has their style, I guess... turbo, supercharge, NA tune, engine swap, all different paths to a same destination: more powar!
Everyone has their style, I guess... turbo, supercharge, NA tune, engine swap, all different paths to a same destination: more powar!
Wrong. I'd be better off saving it. 😆Originally Posted by largeorangefont ↑He would be better off spending the money on an engine swap
You guys take this stuff too seriously.