so after the rinse and dry with rag, how long should you wait to start the car? ive cracked a block before cleaning the engine, though it was a 25yr old car and had no protection against water for the most part. but just want to make sure i dont ruin anything. thank you
DIY: 10 minute engine bay detail
61 posts · 55,154 views · page 2 of 2
Replies continued
do we need to cover somestuff?
Read my post entry a couple up from yours. That's my personal recommendation and how I do it. In my opinion, done once all you have to do later is a casual wipe down.Originally Posted by whiteyaris ↑do we need to cover somestuff?
oh thanks👍Originally Posted by Klink10 ↑Read my post entry a couple up from yours. That's my personal recommendation and how I do it. In my opinion, done once all you have to do later is a casual wipe down.
BUMP for others asking on how to do this
Did you cover the alternator? or not needed?
I've used this method many times and have never covered anything and haven't had any problems.
I do not know how many times I have seen people wash their engines with a garden hose and have problems afterwards. Problems like: My engine wont start! or The Check Engine Light is on!
Yes a looking like new engine is a beautiful thing.
Not being able to start your car is not!
Yes a looking like new engine is a beautiful thing.
Not being able to start your car is not!
Do a search on this site for CTScotts post reference having to clean up an alternator. Moisture can and will find its way in there and unless you dry it out can do damage. Yes I put a plastic bag on it. I also spend an hour drying the motor cabin with a combo of warm and compressed air. This because even a normal exterior wash gets water in there. I don't wash the engine bay but I will use steam in select areas if necessary.
there is NO way a famous rally car driver is on this forum -_- lol
Thanks!