Chris07LBOriginal postNew Jersey · Mar 28, 2007#1Rather then using a film, or the VHT Nite Shades spray tint, I instead got a can of
VHT Window Tinting spray tint.
Once all prep is complete, the VHT gets put on with a heavy coat, looks almost like black water, and allowed to drip down the light assy., as it "self levels" itself out.
One coat is all thats needed, and you can follow up with a final clear coat if wanted.
NOTE - this will ONLY give your tails a
smoked look, not a dark black limo tint look like many coats of Nite Shades will. This is all I wanted, so I'm happy with the results. 😁
3 attachments not included in this copy
Replies 46
Black YarisToledo, OH · Mar 28, 2007#2Nice job, looks good
YamilRSan Diego, CA · Mar 28, 2007#3Will that tint hold up to water pretty good? Or will it fade after so many washes....Good Job 🙇
Chris07LBThread starterNew Jersey · Mar 28, 2007#4Its actually called VHT Window Tint, as in they use it to tint windows normally... so yes. When tinting headlights or tail lights, it gives a smoked apperance with no chance of making one darker then the other, or not spraying correctly like some may experience when using the Nite Shades by VHT.
Window Tint Spray - heavy thick coat, allowed to run off and dry.
Nite Shades Spray - light coats until desired darkness is reached.
I have now used both products, and like them both. Smoked is all I was after with this set.
SpadesOregon,USA · Mar 28, 2007#5shweet!
AstromanWenatchee, WA · Mar 28, 2007#6I just ordered some of that window tint from summit racing (cheapest I could find w/shipping). Washington state laws don't let you blackout your tails (or any of the lights for that matter) but im sure this won't get me into trouble... i hope 🙄. If it works, i'll probably do my LeBaron as well.
Chris07LBThread starterNew Jersey · Mar 28, 2007#7Brake lights, signal lights, and reverse lights all shine bright enough to keep Johnny law happy.
absenterHouston, TX · Mar 28, 2007#8So what is the process of this exactly? Just remove the tails and start sprayin? Still new to all this jazz.
thank ya!
MudBugAZ, USA · Mar 28, 2007#9I'm gonna guess those are just hubcaps. If they are would you mind telling me about them? I like that look.
ChinoCharlesOH · Mar 28, 2007#10 Originally Posted by
absenter ↑ So what is the process of this exactly? Just remove the tails and start sprayin? Still new to all this jazz.
thank ya!
The main thing you want to make sure of is that there is NO dirt, oil, hair, dust, or anything else on the light when you start spraying. A lint-free cloth and a bit of diluted rubbing alcohol will work wonders. I actually used Windex because I was too lazy to go to the store and that worked fine, too. They still look good as new.
Chris, can I tell you how fucking awesome your car looks? I love how you keep simplifying all of the jagged visual edges to give it an almost surreal, simplistic exterior look. You're on your way to one sick ride!
yrsdrgnSF,CA · Mar 28, 2007#11That's pretty nice looking but the smoked look isn't for me anymore.
absenterHouston, TX · Mar 28, 2007#12 Originally Posted by
ChinoCharles ↑ The main thing you want to make sure of is that there is NO dirt, oil, hair, dust, or anything else on the light when you start spraying. A lint-free cloth and a bit of diluted rubbing alcohol will work wonders. I actually used Windex because I was too lazy to go to the store and that worked fine, too. They still look good as new.
Chris, can I tell you how fucking awesome your car looks? I love how you keep simplifying all of the jagged visual edges to give it an almost surreal, simplistic exterior look. You're on your way to one sick ride!
Thanks Chino, with all this extra time on my hands, I've been ordering stuff online like mad. Looks I'll be making a purcahse soon. I think I might go a little darker than Chris though.
Is there anything I should know on removing the tails?
jamal1984Georgia, USA · Mar 28, 2007#13Hi Chriss where did you found that Wheel? or wheel cover? i have been looking for that for a long time.
Chris07LBThread starterNew Jersey · Mar 29, 2007#14As for the tails.... pop off the 2 plastic grills in the hatch area, then take a 10mm socket to remove 2 nuts per housing. Tug them from the outside, and unplug the 1 wire harness. Simple.
If using the Window Tint Spray, do NOT sand or scuff the surface.. it warns of this on the can as well. Any scratches or scuffs will be filled in by the tint spray, and will be seen!
As for the hub caps, got 'em off eBay. They are getting powdercoated Polar White next week. 🤘
Chino, thanks man, its just a lil side thing for me.. tweeks here and there nothing major or expensive. Got my other babies for that. 😎
absenterHouston, TX · Mar 29, 2007#15Thank ya!! Purchasing the spray as we speak. Much appreciated.
Chris07LBThread starterNew Jersey · Mar 29, 2007#16yup.
AstromanWenatchee, WA · Mar 29, 2007#17Has anyone used this for actually tinting windows? 😆
jamal1984Georgia, USA · Mar 29, 2007#18 Originally Posted by
Chris07LB ↑
As for the hub caps, got 'em off eBay. They are getting powdercoated Polar White next week. 🤘
Can you link me the page for that? really appreciate.
Chris07LBThread starterNew Jersey · Mar 29, 2007#19They no longer carry them. I was actually given the link by another member here, when he was told they only had two sets left in 15" fittment. I snatched them right up! 😎
ChinoCharlesOH · Mar 29, 2007#20They still have 14" fitments for anyone with the base steelies.
NutzoidsPhiladelphia · Mar 29, 2007#21 Originally Posted by
Chris07LB ↑ They no longer carry them. I was actually given the link by another member here, when he was told they only had two sets left in 15" fittment. I snatched them right up! 😎
:) Keep em exclusive!
😈
Chris07LBThread starterNew Jersey · Mar 29, 2007#22 Originally Posted by
Nutzoids ↑ :) Keep em exclusive!
😈
There's ma budddddy. 😁
jamal1984Georgia, USA · Mar 29, 2007#23just found 4 hub caps like Chriss for about $90 bucks? good deal?
AstromanWenatchee, WA · Mar 29, 2007#24Don't get the ones from JC Whitney!!! I have heard NOTHING but bad reviews from being really noisy to falling off the car because the clips are not very good. You do get what you pay for. Check out some of the hot rod part sites, they sell quality covers that won't squeak/rattle and fall off. Just my 2 cents.
Chris07LBThread starterNew Jersey · Mar 29, 2007#25 Originally Posted by
jamal1984 ↑ just found 4 hub caps like Chriss for about $90 bucks? good deal?
Back when they had lots to sell, about 3 other members here got them, and the price was still the same when I ordered 2 weeks ago.
I paid $42 shipped. The are also metal, not plastic, and before installing, I pre-bent all the clips for a super tight fit. They can not be removed by hand, you need a paint can opener thingy to get them loose now. 😁
SEARCH - "From Egg Beater to Bonniville."
1 attachment not included in this copy
ChinoCharlesOH · Mar 29, 2007#26I paid 30 shipped for the 14's. If you pay 90 for hubcaps... wow.
Chris07LBThread starterNew Jersey · Mar 29, 2007#27Chucky, reading your novel now... gimme a few.
ChinoCharlesOH · Mar 29, 2007#28Its a novella, Chris. A novella.
Take your time.
eTiMaGoBangkok, Thailand · Mar 29, 2007#29If there are no pictures it might take him a while... 😁
ChinoCharlesOH · Mar 29, 2007#30HAHAHAHAHAHAHAHA
+30 for Thomas for being a pisser.
eTiMaGoBangkok, Thailand · Mar 29, 2007#31talkin about pisser, bladder's full... brb...
jamal1984Georgia, USA · Mar 29, 2007#32they looks similar to Honda Civic Hybrid. You think it's will fit on our car? since their tire dimension around the same.
2007 Honda Civic Hybrid
Wheels & Tires
Compact Spare Tire
SBRP195/65R15 89S, All-Season Tires
Alloy Wheels, 15-In. X 6-In.
Vic-2NZFEPanama · Mar 29, 2007#33Nice work love the tinting, those hubcaps make the car looks kinda like
back to the future thing 🤣
gravylegsToronto · Mar 29, 2007#34Hey Chris, I'm loving the look of the smoked tails. I'm thinking that this is another "do what Chris did" for me! For clarification, you painted the outside of the tail, yes? I know a lot of the other DIYs show the need to dismantle the thing and then bake it back together. I'm not too interested in doing that, but simply spraying the tails....now thats another story...
Thx...
Chris07LBThread starterNew Jersey · Mar 29, 2007#35Nah, its simple. The tails get removed, outside lens gets prep'd, and then sprayed.
If I would have known guys would like this mod, I would have done a DIY.
brickhardmeatInner City, Dallas · Apr 1, 2007#36I have f#$kin moisture in my tail😢
looks fugly, anyone else have this problem? I have never opened it or anything. It has been raing cats and dogs for a week and I noticed tonight there is a nice gigantic moisture cloud formed on the inside of the left tail. Looks grody. Time to start using the warranty I guess. 🙁That or by some JDM.
Chris07LBThread starterNew Jersey · Apr 1, 2007#37Never had that problem. They are not "sealed" air tight from the inside, but unless you have a crack in the lens somewhere, or removed them from the car to clean before spraying them, its got to be a defect and warranty should handle it.
Black YarisToledo, OH · Apr 1, 2007#38 Originally Posted by
brickhardmeat ↑ I have f#$kin moisture in my tail😢
looks fugly, anyone else have this problem? I have never opened it or anything. It has been raing cats and dogs for a week and I noticed tonight there is a nice gigantic moisture cloud formed on the inside of the left tail. Looks grody. Time to start using the warranty I guess. 🙁That or by some JDM.
I had a factory installed FLY in my taillight when I took delivery😁
Chris07LBThread starterNew Jersey · Apr 1, 2007#39😆 (actually a pretty detailed picture.)
1 attachment not included in this copy
Black YarisToledo, OH · Apr 1, 2007#40funny thing is that is the exact fly that was in my taillight, they said it was hard as hell to get out, it was in my turn signal
brickhardmeatInner City, Dallas · Apr 1, 2007#41wow, no flies and I have not removed the tail light assembly for anything, just switched out some bulbs, I don't see a crack anywhere but I'm going to take it in this week
it was very hazy on the inside last night like when your windsheild fogs up, not drippy or fish bowly but enoigh to make it look ugly
Black YarisToledo, OH · Apr 1, 2007#42Brick, I would double check the seal on that tail light, it take two seconds to pull that lamp off.... or just wait and go to the dealership and have them get you a new one, they may not give you a new one if you "tamper" with it
brickhardmeatInner City, Dallas · Apr 1, 2007#43that's kinda what I figured, The haze is dead center where the brake bulb is, no where else, just a nice hazy condensation, It has been raining for days and I have had the trunk open grabbin' groceries and shit, I still don't think it should have happened though, I might try taking a look at it this afternoon, maybe I'll just throw some silica packets in there, nothing a little duct tape won't fix😛
Chris07LBThread starterNew Jersey · Apr 1, 2007#44Picture of gasket area.. so you know before you pull.
2 attachments not included in this copy
absenterHouston, TX · Apr 1, 2007#45Word.
brickhardmeatInner City, Dallas · Apr 1, 2007#46Well, shit you are right about it not being sealed! I thought there would be some kind of sealent around the entire edge of the assembly, they may just be prone to fogging if the conditions are right😕
brickhardmeatInner City, Dallas · Apr 1, 2007#47I'm going to put some dog shit in mine and breed a fly farm.🤤