I am going to get a yaris and I have some questions. I want my yaris to be a bit more sporty than stock. I like the look of lowered yaris' but how much should they be lowered generally, and how much does that cost? If I got a body kit would I need to lower it? Doesn't the kit give it that lowered look?
Newbie Questions
12 posts · 5,557 views
Replies 11
You can get a lip kit for the "lower" look.. but as far as I know there are no massive drops, 2" is the most, and it looks pretty good.
Body kit may or may not go lower than stock.
Body kit may or may not go lower than stock.
i personally don't like cars that have an aftermarket body kit and is not lowered...just looked tacky IMO.
depends on the kit.Originally Posted by Kaotic Lazagna ↑i personally don't like cars that have an aftermarket body kit and is not lowered...just looked tacky IMO.
But for 90% of em... if you dont lay out the car, it looks funky.
Lower it!!
If the gap was any bigger, you need a map to find your way around the fender gap.
If the gap was any bigger, you need a map to find your way around the fender gap.
thanks for the replys....how much should a yaris be lowered?
how much should a yaris sedan be lowered? look good and not bouncy. There are so many brands....to make this decision it's really give me headache. Help
To answer the "how much should I lower my car" question, decide based on the quality of roads around you. I know when I go to Florida, pavement holds up better in warm weather and the roads are much nicer than where I live in Ohio. If your roads are crap, go with a modest set of springs... TRD's or NF's. If you live where the roads are nicer, you can go a little lower... DF's will work.
😆Originally Posted by LoudYar ↑Lower it!!
If the gap was any bigger, you need a map to find your way around the fender gap.
i got the Tein S.Tech's to be different from others here. 😉Originally Posted by jamal1984 ↑how much should a yaris sedan be lowered? look good and not bouncy. There are so many brands....to make this decision it's really give me headache. Help
they should lower the sedan at least 2 inches.
Originally Posted by Kaotic Lazagna ↑i got the Tein S.Tech's to be different from others here. 😉
they should lower the sedan at least 2 inches.
I think I will go this route as well when there are some decent aftermarket shocks\struts finally released. Maybe even go for a nice set of coilovers, that is if I can find a local shop that does corner weighting.
i posted some shocks by Tokico, the D-Spec shocks here somewhere. they're pretty pricey, so i would rather cough up a couple extra hundred bucks to get coil overs, which ones...i have no clue.