Yarisworld Archive

got the green monster intake in

26 posts · 12,502 views

KSIbuckyOriginal postFond du Lac, WI · Mar 17, 2007#1
put in my intake sounds great it was really cheap (it was for a matrix) i had to shorten it a little but other than that i fit great and i planned on it any ways it kicks in a 3000 rpm and keeps going till like 5500rpm i thought it would be like very little but it was great



pictures coming soon

Replies 25

PetersRedYarisThe Black Hills of South Dakota · Mar 17, 2007#2
You must post some pics... I have no idea what a green monster intake is???
eTiMaGoBangkok, Thailand · Mar 18, 2007#3
heh as long as it's not your purple headed monster in that engine bay...
BokChoiSophia, WV · Mar 18, 2007#4
purple headed yogurt slinger is the proper name lol
jdubau55Blacksburg, VA · Mar 18, 2007#5
HAHAHA!
Chris07LBNew Jersey · Mar 18, 2007#6
Search eBay.. they are posted all the time under the Matrix.

That oversize piping didnt hurt performance anywhere? 😕 All the "home made" guys that used piping of that size had issues right off the bat.
KSIbuckyThread starterFond du Lac, WI · Mar 18, 2007#7
no the size wasn't a problem
PetersRedYarisThe Black Hills of South Dakota · Mar 18, 2007#8
Originally Posted by Chris07LB ↑
Search eBay.. they are posted all the time under the Matrix.

That oversize piping didnt hurt performance anywhere? 😕 All the "home made" guys that used piping of that size had issues right off the bat.
What your saying is that the increased diameter of the pipe doesn't allow the MAF to operate correctly?
KSIbuckyThread starterFond du Lac, WI · Mar 18, 2007#9
its the same size as the trd
JDM_EK3Manitoba, Canada · Mar 18, 2007#10
Originally Posted by PetersRedYaris ↑
You must post some pics... I have no idea what a green monster intake is???
PetersRedYarisThe Black Hills of South Dakota · Mar 18, 2007#11
Originally Posted by KSIbucky ↑
its the same size as the trd
What is the inside diameter of the TRD?
YarisGuyUSA · Mar 18, 2007#12
spkrman2 · Mar 18, 2007#13
Originally Posted by YarisGuy ↑
x2
KSIbuckyThread starterFond du Lac, WI · Mar 18, 2007#14
i promise there coming tomorrow
Chris07LBNew Jersey · Mar 19, 2007#15
Matrix intake was 3.0" ID. TRD is not.
KSIbuckyThread starterFond du Lac, WI · Mar 20, 2007#16
Originally Posted by Chris07LB ↑
Matrix intake was 3.0" ID. TRD is not.
you are very right my CEL turned on I've had it on for a day and now it turns on

i have the pics there coming in a couple of minutes
KSIbuckyThread starterFond du Lac, WI · Mar 20, 2007#17
I'm going to scrap parts from it and make one like chino I'm going to cut the tube thing and cut off the bottom and take the maf thing and do the same I have to find a good way of sealing this can anyone suggest something I'm thinking some gorila glue on a radiator tube would work.
intake.jpgnew filter.bmp
ChinoCharlesOH · Mar 20, 2007#18
What have I done?

Bucky, don't follow me. I was only testing something out. You don't want radiator pipe in your intake system dude. That is just plain ghett-OH.
KSIbuckyThread starterFond du Lac, WI · Mar 21, 2007#19
🙁
Originally Posted by ChinoCharles ↑
What have I done?

Bucky, don't follow me. I was only testing something out. You don't want radiator pipe in your intake system dude. That is just plain ghett-OH.
🙁 really i will paint it and i will eventually i will get a new one
ChinoCharlesOH · Mar 21, 2007#20
I'm not trying to shoot your hopes and dreams down homie, give it a shot. You'll definitely learn something, but you don't wanna pop your hood and show everyone your ugly betty! You want pretty betty! 🤣 Finish your intake, I want to see it when its done.

EDIT: Actually, now that I look at it that green monster is literally the same thing as the first design we came up with. We just decided to put the 2-3" coupler further down the line. Yours uses less couplers, but the pressure loss coming to the throttle body is murdering your low end. At the high end (and I'm talking really high) your intake would outperform mine the slightest bit though assuming the ECU ran within parameters.
KSIbuckyThread starterFond du Lac, WI · Mar 21, 2007#21
im also i can run rich by choice so i have the gas up high on the low rpm and the gas "lower" on the high rpm and it works great

Edit i dont like running rich so i do plan on doing this for long just till i fine the right intake i want
Chris07LBNew Jersey · Mar 21, 2007#22
Lets stop and look for a minute KSI..

First off the hacked parts Chino made his tester with, were already the correct inside diameter piping...

If you chop and save you green 3" parts, you will then have to step each side down to smaller piping.. so far that's 2 couplers for each piece you save (one on each side, 3" to X"). Still with me? So what makes you think by keeping the overly large parts that hurt the setup in the first place, that its going to be any better once mated to smaller piping? Not to mention all the different sizes your intake track will be, starting at the filter all the way to the TB.

By a Chino intake and sleep well at night.
spkrman2 · Mar 21, 2007#23
Originally Posted by Chris07LB ↑
By a Chino intake and sleep well at night.
Im just waiting on the yaris ebay intake... it'll be el cheapo.
ChinoCharlesOH · Mar 21, 2007#24
Originally Posted by spkrman ↑
Im just waiting on the yaris ebay intake... it'll be el cheapo.
Its already out, and cheap doesn't even do it justice. XLR8 intake.

You'd be CRAZY.
Black YarisToledo, OH · Mar 21, 2007#25
hey my TRD intake will be up forsale soon, I have something else in mind
KSIbuckyThread starterFond du Lac, WI · Mar 21, 2007#26
Originally Posted by Black Yaris ↑
hey my TRD intake will be up forsale soon, I have something else in mind
how much?


its not modded is it