ricepowerOriginal postSaudi Arabia · Mar 17, 2007#1I have a yaris annoyance..The Clutch start is TOO DEEP. Is there any way to adjust the switch to halfway instead of pressing to the floor level?
Otherwise, can we disable the clutch start?
Replies 16
cleongSingapore · Mar 17, 2007#2 Originally Posted by
du2efs ↑ I have a yaris annoyance..The Clutch start is TOO DEEP. Is there any way to adjust the switch to halfway instead of pressing to the floor level?
Otherwise, can we disable the clutch start?
Its right at the bottom. Probably a simple switch. You can get an auto electrician to remove the switch and wire the circuit shut so you haven't got the clutch start feature anymore.
eTiMaGoBangkok, Thailand · Mar 17, 2007#3I was thinking of doing that too, but I'm so used to it now, it's not a bother...
PetersRedYarisThe Black Hills of South Dakota · Mar 17, 2007#4My Tacoma had a clutch cancel button so pushing the clutch in to start was optional.
ChinoCharlesOH · Mar 17, 2007#5Its good for you. Give the clutch a full engaging every shift and it'll last longer. You'll get used to it.
punchBarrie, ontario · Mar 17, 2007#6 Originally Posted by
ChinoCharles ↑ Its good for you. Give the clutch a full engaging every shift and it'll last longer. You'll get used to it.
thats not what he is referring to, its there so you don't start the car in a gear, without the clutch pushed in, kinda like automatics have a neutral safety switch.
ChinoCharlesOH · Mar 17, 2007#7OH. Sorry. 😳
eTiMaGoBangkok, Thailand · Mar 17, 2007#8heh-heh... dumbass.. heh-heh
😆
Man I remember when I first tried to start the car at the dealership... never drove a car before with this system... So it won't start! And I run back in the dealership and tell them there seems to be a problem with the car... Oops!
ChinoCharlesOH · Mar 17, 2007#9Wait, so let me get this straight... you hopped in a manual car and wondered why it didn't start when you didn't have the clutch depressed all the way?
And you guys are all wanting to start the car without having to press the clutch?
What a bunch of ninnies! 🤣
eTiMaGoBangkok, Thailand · Mar 17, 2007#10hey the way I learned to start a car, was to make sure it's in neutral by moving the stick left to right before turning the ignition, never had this fancy-pants safety feature in all those old cheapass cars we had 😁
Real men don't need stupid safety reminders! We want to fight for the right to crank our cars into a wall!
actually, while on topic a friend of mine ripped the driver's door out of his dad's car when cranking the engine while the gear was in reverse.. Mega-oops!
As I said, I'm used to it now 😁
RogueYarisJAX · Mar 17, 2007#11 Originally Posted by
eTiMaGo ↑ Real men don't need stupid safety reminders! We want to fight for the right to crank our cars into a wall!
That made me laugh, a real good from the belly chuckle. I remember having a car that I had to practically stand on the clutch to get it to engage. I say if you want to have it disabled, do it. I just wouldn't expect much sympathy if you were exercising your right to crank your car into someone else's.
PoorboyNE Ohio · Mar 17, 2007#12Back to the tacoma and mine had the same switch, you were supposed to use that switch to use the starter to "drive" the vehical out to a stuck spot. I never did this because I can use a clutch gently to get out of the mud. But hell I had the locking rear end so there was no way to get it stuck. But you could easily pull the switch off your clutch and wire it so it thinks it is engaged. This won't affect anything other than make sure you have the clutch in when you start it or your gonna lurch!
jdubau55Blacksburg, VA · Mar 17, 2007#13US cars have had that for decades....literally. I would think having NOT to push the clutch in would weird me out.
bugnutsBowling Green, Kentucky · Mar 18, 2007#14Funny that you would mention this now, just the other day I was thinking the same thing when I practically had to slam my foot to the floor to get it started, Tommorow I am looking into what can be done to adjust it. On my Toyota pickup the switch was threaded and could be adjusted in and out, Hope this is the case.
ricepowerThread starterSaudi Arabia · Mar 18, 2007#15problem with my yaris is you have to floor the clutch all the way t0 98%...At least it should have like 75% to 90% pressing is tolerable.
I've been thinking to fix a rubber bumper where the switch strike-in to. at least say 4mm just to reach 75% clutch start press
mcdaddySaudi Arabia · Mar 18, 2007#16IMO.. I'm not bothered with the switch myself.. It's there for safety purposes.. think of the danger when kids playing the wheels, car keys... GMC & most american cars has these feature & I love it myself..
SpadesOregon,USA · Mar 18, 2007#17yeah, most of the cars I have owned had this safety feature. I got used to it and now I dont even think about it.
A ghetto way to get rid of it is to jimmy rig the clutch position sensor to stay open all the time by bypassing the sensor and running the circut hot all the time so it thinks the clutch is down all the way all the time.
However, I would not reccomend this because of safety reasons and because I dont know that the wire was intended to stay hot 24/7, so if anyone asks, I never mentioned the idea.