eTiMaGoOriginal postBangkok, Thailand · Mar 11, 2007#1Well, after the unfortunate meeting of the front of my car with a stupid cement parking curb thingie, I had to take off the front lip.
So, here's a couple of pics, I'd like to know your thoughts on whether it looks weird with just the side skirts on, or you think I should keep them 😉
Excuse the bad quality of the pics, this was taken in pretty low light...
2 attachments not included in this copy
Replies 28
SlummyD.C. · Mar 11, 2007#21st Pic a little strange, but the 2nd one looks good. I can't decide.🤷
eijikikimaruSo. CaL · Mar 11, 2007#3 Originally Posted by
eTiMaGo ↑ Well, after the unfortunate meeting of the front of my car with a stupid cement parking curb thingie, I had to take off the front lip.
So, here's a couple of pics, I'd like to know your thoughts on whether it looks weird with just the side skirts on, or you think I should keep them 😉
Excuse the bad quality of the pics, this was taken in pretty low light...
Well based on the picture it looks ok to leave on the skirt, but could we get a picture from the side of the car. I'd like to see if there's a lot of height difference from where the front lip use to be.
yrsdrgnSF,CA · Mar 11, 2007#4That looks pretty sick man. I wish the US Yaris came with side skirts or something to do with the body other than factory option spoiler.
hasher22Australia Sydney · Mar 11, 2007#5put it back on......my opinion, just looks like a normal australian yaris.....
TrancosRtS Florida · Mar 11, 2007#6Looks good IMHO...
Chris07LBNew Jersey · Mar 11, 2007#7Looks bad. Sending me your side skirts will make it look right again though.
eTiMaGoThread starterBangkok, Thailand · Mar 11, 2007#8hahaha dream on 😁 When I get something new for the front, those side skirts will be there for sure 😉
BlenjarCT · Mar 11, 2007#9Looks realy normal...
-- Blen
Black YarisToledo, OH · Mar 11, 2007#10how bad are the front ones fucked up? may be a good chance for one of us North American guys to see if Asian lip kits even fit
eTiMaGoThread starterBangkok, Thailand · Mar 11, 2007#11Front lips would fit on USDM bumpers no problem
But, the lip is in two pieces down the middle now, and pretty badly scratched up. I'm sure a decent fiberglass workshop would be able to put in back into shape, I could just go that route, but I think I'll be getting a JDM RS front bumper...
Black YarisToledo, OH · Mar 11, 2007#12Want to ship it to the US.... I will Glass it up nice for some one, I don't want it, but if someone else does I will make it nice
eTiMaGoThread starterBangkok, Thailand · Mar 11, 2007#13heh I suppose i could, but then with no side or skirts it would look weird too, no?
Chris07LBNew Jersey · Mar 11, 2007#14Im very good with body work. If the price is right, ill take it off your hands.
ChinoCharlesOH · Mar 11, 2007#15 Originally Posted by
eTiMaGo ↑ heh I suppose i could, but then with no side or skirts it would look weird too, no?
Weird is an understatement. It would look reeeeee-tarded.
Kaminari lip kit is 700 bucks don't forget.
ASHRAFHouston, TX · Mar 11, 2007#16keep the skirts on,
that will make you order the JDM RS bumper faster :)
BTW, DAMD with the JDM RS bumper will look just fuckin PIMP
I really like the setup
As you do that, think about something for the rear bumper and ur car will be the best (well, it is now :), but it will be million thousand better)
c Y a
RazrChiangmai, Thailand · Mar 11, 2007#17Well, good enough excuse to go for a full bumper I'd say! I like the JDM RS rear bumper, but none of the OE front bumpers really do it for me 🙁
I'm really starting to dig this C-One front bumper 👍 , but there's masses of options..
1 attachment not included in this copy
RazrChiangmai, Thailand · Mar 11, 2007#18There's even a matching rear lip kit for the JDM rear bumper.. 😎
1 attachment not included in this copy
Chris07LBNew Jersey · Mar 11, 2007#19Makes the car a little to rice for my tastes..
RazrChiangmai, Thailand · Mar 11, 2007#20Well, we're both in Asia where rice is a staple LOL 👍
yrsdrgnSF,CA · Mar 11, 2007#21The C-One front bumper looks nice but I think that the Burnout front bumper looks more calm for the streets.
forpinksLAS VEGAS, NV · Mar 11, 2007#22It looks kinda uneven!
GET THE LIP REPAIRED ASAP!!! its OK if you look on top though... 👍
But anyway people wont notice it that much... they'll think its OEM.
Oh! is that pic taken with your N93 and in Siamparagon Mall?
Chris07LBNew Jersey · Mar 11, 2007#23I need side skirts like knowone's business!!!!!
eTiMaGoThread starterBangkok, Thailand · Mar 11, 2007#24OK, well this is my plan, gonna be a bit of patchwork, but should look good. Keep the existing side skirts (Kenstyle), get a front RS bumper with either Burnout or DAMD lip, and add the Modellista II rear lip with center exhaust.
I'd rather not change the whole front bumper to an aftermarket one, none of the existing ones appeal to me...
yrsdrgnSF,CA · Mar 11, 2007#25Sounds like a nice idea. Run with it and see what the turnout is.
eTiMaGoThread starterBangkok, Thailand · Mar 12, 2007#26Well here's some side shots, as well as what's left of the front lip...
I guess it looks OK, as the curvature of the bottom of the front bumper flows into the side skirts.
forpinks, they were taken with my N93i, but at the parking lot of Suvarnabhumi Airport 😉
C-One bumper's kinda cool, but too busy for my taste. I like the snub-nosed look of the Yaris, wanna stick with it as much as possible.
3 attachments not included in this copy
Chris07LBNew Jersey · Mar 12, 2007#27she still looks hott, just as is.
eijikikimaruSo. CaL · Mar 12, 2007#28Oh the poor lip 😢
Black YarisToledo, OH · Mar 12, 2007#29you could so fix that lip, but like you said, good excuse to replace the whole front bumper... I am fond of the JDM RS Bumper.... nice clean look, and it would match your skirts and rear