Yarisworld Archive

ZPI exhaust installed!! (pics)

103 posts · 24,266 views · page 1 of 3

PetersRedYarisOriginal postThe Black Hills of South Dakota · Mar 9, 2007#1
It came early as it wasn't supposed to be here until tomorrow. Installation was a bit of a bitch as the hangers didn't let it hang correctly and had to be finagled around. Is that normal to have to bend the muffler hangers a bit to make it fit right? Also longer bolts had to be purchased as the stock ones were not only to short, but the nuts for them are tack welded onto the old muffler flange.

Overall fit and finish are O.K. Why? Well, in addition to the hangers not fitting correct, the welds are a little sloppy; their not so bad, and as long as they don’t rust, they do seem very durable.

So installation was a PITA, but, the looks and sound of this system are where it steps it up a notch. It is not huge as indicated by the pictures with the soda can, and it sounds awesome. I don’t have the means to record a sound clip, but, trust me on this, it has a nice deep tone just like ZPI racing said it would, and it’s not to loud either.

As far as looks, I hate those coconut launchers the ricers like to stick under their cars, but that’s not what this is. Just look at the pictures; it’s just the right size, fits up nice and tight with just the right clearance, and sticks out just the perfect amount. I recommend it as long as you have the ability to make it fit correctly.

Size-
Picture not included in this copy

Here a comparison to the origional-
Picture not included in this copy

I purchased two 7/16 3.5 inch grade 5 bolts, 4 washers, and 4 nuts, and used the stock springs. The extra length is needed as the new flange is much deeper than the origional. The extra nuts are so they never vibrate loose.
Picture not included in this copy

Heres my clearance issue. It was touching the spring bucket. This is as much clearance as I could get.
Picture not included in this copy

And here it is finished.
Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Hope these help you decide if this is the exhaust for you.

Replies 102

Chris07LBNew Jersey · Mar 9, 2007#2
Hummmmmm... still a bit too big looking for my tastes.

Sucks you needed to make so many adjustments to a brand new system. I would be asking for a kick back for sure.
CASTREXCosta Rica · Mar 9, 2007#3
Agree, a bit too big. But I bet that would look great mounted on a JDM rear bumper.
Chris07LBNew Jersey · Mar 9, 2007#4
Im getting an idea....... how much was the total, with shipping on this piece again?
PetersRedYarisThread starterThe Black Hills of South Dakota · Mar 9, 2007#5
Originally Posted by Chris07LB ↑
Sucks you needed to make so many adjustments to a brand new system. I would be asking for a kick back for sure.
Yeah, I tried to be positive when I did the write-up, but I admit I was pissed off when it didn't fit. I considered sending it back. But, after waiting so long for it, I really wanted it to work. Maybe they should give me a free lightened pully for my troubles.👍
PetersRedYarisThread starterThe Black Hills of South Dakota · Mar 9, 2007#6
Originally Posted by Chris07LB ↑
Im getting an idea....... how much was the total, with shipping on this piece again?
$213 with shipping.
Chris07LBNew Jersey · Mar 9, 2007#7
Peter, do you have anymore full pictures of your car? Im liking what I can see, very much. 😎
NutzoidsPhiladelphia · Mar 9, 2007#8
I have said it before I will say it again...

01) Mini Exhaust
02) Boxster Exhaust

Center Exhaust, Duel Outlet! I will not buy an Exhaust system until I see this!

😈

2 attachments not included in this copy

largeorangefontSo Cal, OC · Mar 9, 2007#9
ehhh I don't like it. The canister style mufflers on these cars just don't do it for me. To each his own though.
PetersRedYarisThread starterThe Black Hills of South Dakota · Mar 9, 2007#10
Originally Posted by Chris07LB ↑
Peter, do you have anymore full pictures of your car? Im liking what I can see, very much. 😎
I just took some today and updated my garage. Thanks!!!
PetersRedYarisThread starterThe Black Hills of South Dakota · Mar 9, 2007#11
Originally Posted by Nutzoids ↑
I have said it before I will say it again...

01) Mini Exhaust
02) Boxster Exhaust

Center Exhaust, Duel Outlet! I will not buy an Exhaust system until I see this!

😈
I agree with you that it would look super sweet. It must be done with the correct bumper however. Hanging down by all by itself would not look nearly so cool.
07typeSSouthern California · Mar 9, 2007#12
petersredyaris......im with you, if mine takes that much modification to fit, i may be trying to get a little back from them or like you said a pulley shipped my way....

i think maybe if you notched a half circle and brought it up a little into the bumper it may look a little nicer.....

a very crappy paint of what i mean.....

1 attachment not included in this copy

Chris07LBNew Jersey · Mar 9, 2007#13
right away, i think they need to shorten the piping behind the muffler at least 3 inches.

The top of the very end of the tip, should be just about even with bumper... IMO.
07typeSSouthern California · Mar 9, 2007#14
and i also have a question about that picture that shows the old pipe coupling to the new one......maybe its me but it doesnt look like a good fit, like its not sitting flush....
07typeSSouthern California · Mar 9, 2007#15
Originally Posted by Chris07LB ↑
right away, i think they need to shorten the piping behind the muffler at least 3 inches.

The top of the very end of the tip, shoul be just about even with bumper... IMO.
look at the side view thiough..its pretty close to almost flush with the back bumper, his shot isnt completely sideways either.....
07typeSSouthern California · Mar 9, 2007#16
Originally Posted by Chris07LB ↑
right away, i think they need to shorten the piping behind the muffler at least 3 inches.

The top of the very end of the tip, shoul be just about even with bumper... IMO.
look at the side view thiough..its pretty close to almost flush with the back bumper, his shot isnt completely sideways either.....

but i think it could be trimmed a little and i might......
Chris07LBNew Jersey · Mar 9, 2007#17
IMO it sticks out too far, and "trimming" wouldnt solve anything.

If you shorten the piping, you will need to move the rubber mounting points the same amout. If you have fab skills and know how to weld, its a 15minute job. Thats why Im considering purchasing this system, and making it fit how I want it.

SOUND CLIPS NEEDED!
PetersRedYarisThread starterThe Black Hills of South Dakota · Mar 9, 2007#18
Look at the pictures in my garage; it doesn't stick out as far as my install pictures make it appear to. IMO the exhaust needs to be flush with outermost part of the bumper, which it is, so you don't get that black exhaust soot buildup on the nice painted bumper surface.
largeorangefontSo Cal, OC · Mar 9, 2007#19
Originally Posted by Chris07LB ↑
IMO it sticks out too far, and "trimming" wouldnt solve anything.

If you shorten the piping, you will need to move the rubber mounting points the same amout. If you have fab skills and know how to weld, its a 15minute job. Thats why Im considering purchasing this system, and making it fit how I want it.

SOUND CLIPS NEEDED!
Why waste the time.. Buy the muffler you want and have an exhaust shop do it up. It shouldn't be more than $200 and take about an hour.

Personally, I like the placement of the stock muffler and tip. Mabye it is because the bumper is so short, but every axleback seems to "stick out" too much for my taste.

I'm toying with the idea of getting a custom axleback done. I'd use a normal oval style magnaflow and tuck it up under the bumper then put a turn down on it, and paint it all black. I see alot of stock Jettas and Golfs with an exhaust like that. Then you wouldn't be able to see anything at all hanging under the bumper.
jdubau55Blacksburg, VA · Mar 9, 2007#20
Maybe you have a really nice shop around. None of my local muffler shops deal with mandrel bent pipe. Its all crush bent. I say why do it if your not gonna do it right.
RShatchbackNY · Mar 9, 2007#21
Originally Posted by Chris07LB ↑
right away, i think they need to shorten the piping behind the muffler at least 3 inches.

The top of the very end of the tip, should be just about even with bumper... IMO.
I agree - first thing i thought was that it looks too far out, like someone just had a universal muffler welded up. I'm not a fan of cans though, waiting for Some type of Apexi WS2 to come out.
tekmoedallas, texas · Mar 9, 2007#22
love my jdm trd exhaust!!!

🙂
forpinksLAS VEGAS, NV · Mar 10, 2007#23
Originally Posted by Nutzoids ↑
I have said it before I will say it again...

01) Mini Exhaust
02) Boxster Exhaust

Center Exhaust, Duel Outlet! I will not buy an Exhaust system until I see this!

😈
HEHE! ZPI SHOULD MAKE THESE FOR MORE MONEY!!! I'LL BUY THIS IF THEY MAKE IT, OR ELSE I'LL SETTLE FOR THE TANABE...
KatanaUnder the hood! · Mar 10, 2007#24
Any hp gains?
Chris07LBNew Jersey · Mar 10, 2007#25
Originally Posted by Katana ↑
Any hp gains?
doubt if everyone is going to pay for a dyno run.... ZPI didnt even put it on the dyno, just said it did feel like an improvement.
OxyG3nEMontreal , Quebec , Canada · Mar 10, 2007#26
i would like to get this one.. but im not a mechanician so is it hard to fit? and it would be nice if you take 3 minute to take a sound clip :p :P
NimbleChicago, IL · Mar 11, 2007#27
Ehh....not a fan of that design. The build quality looks nice though.
KatanaUnder the hood! · Mar 11, 2007#28
Originally Posted by Chris07LB ↑
doubt if everyone is going to pay for a dyno run.... ZPI didnt even put it on the dyno, just said it did feel like an improvement.



Thanks for answering.This is common in theses cases.
NutzoidsPhiladelphia · Mar 11, 2007#29
I FOUND IT... I FOUND IT...

MY DREAM YARIS!

LOOK AT HER IN ALL HER BEAUTY

LOOK AT THAT EXHAUST PIPE....

AHHHH YEAH... NOW THAT'S THE STUFF!

😈

1 attachment not included in this copy

AlanSRT4maryland · Mar 12, 2007#30
HP gains on things like exhaust and all are very minimal at best. you usually do it for sound and looks. going with lighter weight wheel set up and trying to loose a bit more weight on the car or yourself will give you a bigger gain than full exhaust and intake would I figure.

then again cars like these are meant to be fun and economy. I going pretty much for something I like the look of and handelilng. If I do performance I will either turbo it or do direct port N2O
AlanSRT4maryland · Mar 12, 2007#31
Also as for crush vs mandrel bends won't make a differnce on these cars anyways. I agree with the idea of finding a muffler you like and having a shope put it on for you.
Chris07LBNew Jersey · Mar 12, 2007#32
I believe he knows that, but was trying to state that on this car, a simple muffler swap with either bend would be hard to tell any difference by the butt dyno.
largeorangefontSo Cal, OC · Mar 12, 2007#33
Originally Posted by Chris07LB ↑
I believe he knows that, but was trying to state that on this car, a simple muffler swap with either bend would be hard to tell any difference by any dyno.
Fixed.
ChinoCharlesOH · Mar 12, 2007#34
I got quoted 200 bucks for a custom exhaust w/ defoulers, no cat, center mount w/ dual tips and resonator.

Suckers. 😆
jdubau55Blacksburg, VA · Mar 12, 2007#35
No cat? Is that legal in OH?
ChinoCharlesOH · Mar 12, 2007#36
Is that legal anywhere?

Do I give a poop? 😆
Black YarisToledo, OH · Mar 12, 2007#37
Originally Posted by ChinoCharles ↑
Is that legal anywhere?

Do I give a poop? 😆
are you removing both cat's and the resinator? and you remember how loud my car was with a similar set up with cats, damn your shit is going to be loud!
OxyG3nEMontreal , Quebec , Canada · Mar 12, 2007#38
i want it but im affraid of beeing too big and what it sound like
OxyG3nEMontreal , Quebec , Canada · Mar 13, 2007#39
i finally ordered it.. will see how it is when i get it huhu
KSIbuckyFond du Lac, WI · Mar 13, 2007#40
How Does It Sound? and how much (i saw $200 and $211 shipped)
MooseCumming, GA · Mar 13, 2007#41
Looks pretty good. The nice thing about it coming out from the bumper a little is that it won't leave that nasty black residue all over your back bumper. I have to clean that crap off of my other car every damn weekend.
Chris07LBNew Jersey · Mar 14, 2007#42
Originally Posted by OxyG3nE ↑
i finally ordered it.. will see how it is when i get it huhu
Did you ask about the issues mentioned in this post while ordering??
OxyG3nEMontreal , Quebec , Canada · Mar 14, 2007#43
i ordered it last night.. and no answer for now
Chris07LBNew Jersey · Mar 14, 2007#44
I would have waited for an answer before slaping down the money, but hey, thats just me.

Hopefully yours will be spot on for a much easier bolt on install.
OxyG3nEMontreal , Quebec , Canada · Mar 14, 2007#45
thats the less expensive exhaust i found .. so even if it need little modification .. lol.. (well i hope ill be able to do it ) lol
OxyG3nEMontreal , Quebec , Canada · Mar 14, 2007#46
here is the answer i got :
He is sending it back to us and we are checking the problem. This should notbe an issue. We have stopped shipping these until we can confirm that thiswas a one time issue or fix the issue.

At least they could tell on the web site that they have stop shipping it...
07typeSSouthern California · Mar 14, 2007#47
atleast you got an email.... i cant get them to email me back.
PetersRedYarisThread starterThe Black Hills of South Dakota · Mar 14, 2007#48
Originally Posted by 07typeS ↑
atleast you got an email.... i cant get them to email me back.
Neither can I... They just said send it back and they'll fix it. I don't even know who I'm dealing with. In addition, I don't know how their going to solve the problem when they can't see it on the car. ZPI, you need to get on the ball with your customer service!!! I have pictures I can email concerning the fitment if I only knew who to send them to.
07typeSSouthern California · Mar 15, 2007#49
Originally Posted by PetersRedYaris ↑
Neither can I... They just said send it back and they'll fix it. I don't even know who I'm dealing with. In addition, I don't know how their going to solve the problem when they can't see it on the car. ZPI, you need to get on the ball with your customer service!!! I have pictures I can email concerning the fitment if I only knew who to send them to.
im with you on this one...i dont care that there having fitment issues, but get someone to send out an email explaining why its takin freakin forever....
ChinoCharlesOH · Mar 15, 2007#50
ZPI is a supporting vendor, and this treatment of members is bullshit. To be honest, this doesn't surprise me.

ZPI, GET YOUR SHIT TOGETHER.