redyarisOriginal postOrlando, FL · Mar 5, 2007#1Im installing a Sony PS2 system under the right front pax seat on the floor.
I want to run an AV (2 plug) output wire from my new DVD system mounted at the dome light down to the right front passenger seat floor via the right B pillar...I have fish tape to use for this.
Question: what will I run into in the roof? In the pillar? Is the B pillar trim easy to remove? How do I do this?
Replies 6
punchBarrie, ontario · Mar 5, 2007#2 Originally Posted by
redyaris ↑ Im installing a Sony PS2 system under the right front pax seat on the floor.
I want to run an AV (2 plug) output wire from my new DVD system mounted at the dome light down to the right front passenger seat floor via the right B pillar...I have fish tape to use for this.
Question: what will I run into in the roof? In the pillar? Is the B pillar trim easy to remove? How do I do this?
yes it should just pry off, no big issue.
easy, panel pops off and the clips dont break.
redyarisThread starterOrlando, FL · Mar 6, 2007#4Will I have to unscrew the seat belt bolt?
IllusionXBrossard, QC · Mar 6, 2007#5i know with my echo, i had to unscrew the seat belt bold to completely remove the B pillar. i haven't really looked into the yaris, but i imagine them to be the same.
but you really want to FISH, or just remove the pillar and have the whole access to put your wire??
redyarisThread starterOrlando, FL · Mar 9, 2007#6I bought the fish tape for the roof section. I dont know what I will run into in there from dome light opening over to B pillar. Perhaps Violin can advise from his moon roof install...im not too worried about the B pillar if the trim does indeed pop off and on easily.
I love this forum!
spkrman2 · Mar 10, 2007#7 Originally Posted by
redyaris ↑ Will I have to unscrew the seat belt bolt?
yea definitely.