http://www.zeropointindustries.net/g...deos/yarisdyno Well guys results are in and we hit what we expected... We ran about 10 runs and every single one was right in the same range. The only thing was we were also running a very rich tune. It ranged from 9.5:1 to 10:1. So these are just priliminary numbers, kenny talked me into staying an extra day and we are headed back tomorrow to tune the car on the dyno with a much better tune setup. We would have done that today but kenny forgot the emanage cable.. DUH!!! haha. The dyno we ran on was a mustang dyno. I hope the video gives you a good idea of what the car will sound like and everything else, if you have any other questions feel free to ask away, and also be ready for some even better numbers and some charts tomorrow.
dyno results are in!!!!
104 posts · 27,466 views · page 1 of 3
Replies 103
OMFG!! 179HP! I'd love to have one but my broke student ass couldn't afford it. I should get a cardboard sign saying "I need a turbo for my Yaris" and stand by an offramp.
that could work.... or you could just go in debt like i did hahaha its all well worth it for the shock factor... and the speed!!!
Very nice work! sounds sweet, and makes me miss my chipped MKV GTI.
Holy Sweetness!!! I love that sound of a turbo spooling up, and the exhaust sounds great, can't wait for mine.
i'll be there standing right next to you. 😆Originally Posted by RogueYaris ↑OMFG!! 179HP! I'd love to have one but my broke student ass couldn't afford it. I should get a cardboard sign saying "I need a turbo for my Yaris" and stand by an offramp.
yeah, i like the sound of the exhaust too. my friend also likes it.
hotness :)
179. thats great for a peak number. but can we see the actual charts please?
you will get to see the charts posted today, like I said we kinda had a hole in our tuning map where around 4000rpms at which point our afr dropped from 10:1 down to 9.5:1, at the same time we saw a drop of about 20 ft lbs of torque. We didn't see it necessary to post these charts as the car wasn't fully tuned. I feel that our torque number will increase at this point which is key because it is in the middle of our power band. We just have to optimize the maps a little bit better so that your basic tune that comes with the kit is much better. The other cool thing that kenny told me was he leaned out the off boost driving, so when you cruise down the highway expect to get even better gas mileage. 😁 Be looking for more info today guys as I will be sure to keep you updated. I can't wait to feel the even bigger increase in midrange power.
I would have liked 200 better.
But still thats what a 70% increase from stock?
I'm all for it as a sadan a/m trans owner :)
But still thats what a 70% increase from stock?
I'm all for it as a sadan a/m trans owner :)
I don't think you will be dissappointed with 180 whp haha believe me its fast... another thing to remember is this is on standard 93 octane I think we will have a better idea today or total capabilities on street gas. If its 200 you want all you'd really have to do then is get some racing gas and a tune for it and I'm sure you could hit 200 whp. If you want that on 93 octane, you will need one other supporting mod that you will probably find out about shortly... muuuhahahahaha 😈
70% increase? Thats a 100% increase in WHP. Ridiculous.
How much boost are you running? Do you have multiple settings loaded in that eManage or are you running 180 WHP all the time?
How much boost are you running? Do you have multiple settings loaded in that eManage or are you running 180 WHP all the time?
I want , I want, I waaaaaant
Interesting. Can you tell us what the mods are to the vehicle? What is the weight...after all that's one of the primes in vehicle racing, power to weight.
180 someodd Hp @ 2500 lbs..., with a good hookup on street tires you should be seeing 14-15 second quarter. MAYBE a high 13...maybe. DRs or slicks should be able to take a half second maybe more off that.
Where's the power band? Is it wide? You said you were running rich. perhaps a little boost here, some timing there and you could squeak out another bit of Hp. What about the intercooler? You're running one...meth injection on it? That'll DEFINATELY help on 93 octane.
More info! I'm not going to do something like that, I've already learned my lesson with my daily driver (SRT-4), but I am definately interested.
Here's a wicked idea...We have DOHCs right? You CAN make it a TT...
Think about it, running lower boost smaller, quicker turbos, very little lag. Hell, they just did it with the SRT-4 and it's not too expensive either. The ones on the SRT-4s aren't any more expensive than the TRD superchargers. You've already got a standalone don't you? Injector size? What spark are you running to the engine? You've probably got plenty of air, are you working with a 2 1/2" in or a 3"?
I think I covered it...fuel, fire and air. Here's something to get your mind going, the pic is huge so I just gave the link:
http://www.srtforums.com/forums/atta...4&d=1166776795
...All right...
I can't stand it! What are the REAL numbers besides the F/A ratio. What's your compression at max boost? You're running these #'s on stock internals? Do you have an oil pressure reading? What about your fuel flow? Not to say it can't be done...just watch yourselves though.
180 someodd Hp @ 2500 lbs..., with a good hookup on street tires you should be seeing 14-15 second quarter. MAYBE a high 13...maybe. DRs or slicks should be able to take a half second maybe more off that.
Where's the power band? Is it wide? You said you were running rich. perhaps a little boost here, some timing there and you could squeak out another bit of Hp. What about the intercooler? You're running one...meth injection on it? That'll DEFINATELY help on 93 octane.
More info! I'm not going to do something like that, I've already learned my lesson with my daily driver (SRT-4), but I am definately interested.
Here's a wicked idea...We have DOHCs right? You CAN make it a TT...
Think about it, running lower boost smaller, quicker turbos, very little lag. Hell, they just did it with the SRT-4 and it's not too expensive either. The ones on the SRT-4s aren't any more expensive than the TRD superchargers. You've already got a standalone don't you? Injector size? What spark are you running to the engine? You've probably got plenty of air, are you working with a 2 1/2" in or a 3"?
I think I covered it...fuel, fire and air. Here's something to get your mind going, the pic is huge so I just gave the link:
http://www.srtforums.com/forums/atta...4&d=1166776795
...All right...
I can't stand it! What are the REAL numbers besides the F/A ratio. What's your compression at max boost? You're running these #'s on stock internals? Do you have an oil pressure reading? What about your fuel flow? Not to say it can't be done...just watch yourselves though.
1 attachment not included in this copy
Those are some GREAT preliminary numbers turboyaris 👍 .
Wow i'm shock, great numbers, what is going to be the base price for this kit?
Car has ~5000 miles.
It has larger injectors, emanage, a full 2.5" mandrel bent exhaust from the turbo back, clutch, lightweight crank pulley and some lowering springs.
Stock motor, pump gas, no meth, it has a smaller intercooler than what we run on the xB, but it's plenty for the power level.
It has larger injectors, emanage, a full 2.5" mandrel bent exhaust from the turbo back, clutch, lightweight crank pulley and some lowering springs.
Stock motor, pump gas, no meth, it has a smaller intercooler than what we run on the xB, but it's plenty for the power level.
Originally Posted by nester ↑Car has ~5000 miles.
It has larger injectors, emanage, a full 2.5" mandrel bent exhaust from the turbo back, clutch, lightweight crank pulley and some lowering springs.
Stock motor, pump gas, no meth, it has a smaller intercooler than what we run on the xB, but it's plenty for the power level.
What exactly would include the ZPI kit?
Do you already have an estimate $$$ ???
What's your boost level? I'd wish for lower boost levels BUT having seen N/A conversions, I'd imagine we're talking 10-14 lbs?
The pulley replacement is a logical thing. I like that. Doing anything with the stock motor mounts? Not being a supercharging guy, how does the idea of a larger (bored out) throttle body and polished instake manifold sound? Make it smooooooooth.
The meth injection might be a smart thing. Might look at a crank scraper and a fuel return line. I'm not overly familiar with the Yaris engine. Actually I need to stay away from it...I'll get myself into trouble. I'll just stick with stereos and my friend's turbos.
Just BE CAREFUL! I hate hearing about engines self-destructing. Keep that boost manageable.
The pulley replacement is a logical thing. I like that. Doing anything with the stock motor mounts? Not being a supercharging guy, how does the idea of a larger (bored out) throttle body and polished instake manifold sound? Make it smooooooooth.
The meth injection might be a smart thing. Might look at a crank scraper and a fuel return line. I'm not overly familiar with the Yaris engine. Actually I need to stay away from it...I'll get myself into trouble. I'll just stick with stereos and my friend's turbos.
Just BE CAREFUL! I hate hearing about engines self-destructing. Keep that boost manageable.
What did the car baseline on that dyno?
It definately sounds good. What are you using for engine managment? Have you adjusted timing yet?
Ashley
It definately sounds good. What are you using for engine managment? Have you adjusted timing yet?
Ashley
Originally Posted by sqcomp ↑Interesting. Can you tell us what the mods are to the vehicle? What is the weight...after all that's one of the primes in vehicle racing, power to weight.
180 someodd Hp @ 2500 lbs..., with a good hookup on street tires you should be seeing 14-15 second quarter. MAYBE a high 13...maybe. DRs or slicks should be able to take a half second maybe more off that.
Where's the power band? Is it wide? You said you were running rich. perhaps a little boost here, some timing there and you could squeak out another bit of Hp. What about the intercooler? You're running one...meth injection on it? That'll DEFINATELY help on 93 octane.
More info! I'm not going to do something like that, I've already learned my lesson with my daily driver (SRT-4), but I am definately interested.
Here's a wicked idea...We have DOHCs right? You CAN make it a TT...
Think about it, running lower boost smaller, quicker turbos, very little lag. Hell, they just did it with the SRT-4 and it's not too expensive either. The ones on the SRT-4s aren't any more expensive than the TRD superchargers. You've already got a standalone don't you? Injector size? What spark are you running to the engine? You've probably got plenty of air, are you working with a 2 1/2" in or a 3"?
I think I covered it...fuel, fire and air. Here's something to get your mind going, the pic is huge so I just gave the link:
http://www.srtforums.com/forums/atta...4&d=1166776795
...All right...
I can't stand it! What are the REAL numbers besides the F/A ratio. What's your compression at max boost? You're running these #'s on stock internals? Do you have an oil pressure reading? What about your fuel flow? Not to say it can't be done...just watch yourselves though.
There is not going to be any "lag" in a traditional sence, but it will just pick up on the top end since tha car has high compression and is really an NA car. The question is when does the car achive full boost? Put it in 4th at 35 MPH or so, hit WOT and tell us at what RPM the car hits full boost, and what that boost # is. There is no need for twin turbos on this car. All you need is a properly sized turbo and you will hit full boost under 3000 RPM and hold it to redline.
Ashley
The sound is sooo sweeet. I'm going to have to start saving.
Freeking sexy i say 🎉 , just watch out with the boost or it will blow the thing out, how much boost are you currently runing?
The video is sweet 😁
The video is sweet 😁
Obviously there's not going to be any lag...it's a S/C. I was just floating the idea of a TT setup on a DOHC vehicle. I might agree with you about the "no need" for TTs on this vehicle. Technically since the engine isn't engineered for speed and power, there's no need for a S/C either. The top end power won't be there like it would from a turbo but still, it is there. This is why looking at the numbers and graphs would help us make decisions.
The TT argument could go on for a while.
When you say "proper sized turbo" you mean what will give the mean performance. The middle ground of boost lag and overall boost pressure. Hell, there's no need for a TT setup on a Supra, a 300z, a WRX or EVO...but they're out there.
An example is the SRT, give a good manifold with twin stockers and you have just as much output as a big "laggy" turbo with faster spool. Port and clip those babys and you're going to be screaming. Tell me the sound alone wouldn't give a chub or two! On the other hand, they made that 2.4L for a turbo application. DCR is working with at least 500 Hp on the twin Mitsu stockers at a faster spool than a GT30 or GT35.
I like the open ended discussion though. Please, don't get the idea that I'm trying to shoot it down. Having seen heads blow from too much boost...I just want you guys to BE CAREFUL!!!
The TT argument could go on for a while.
When you say "proper sized turbo" you mean what will give the mean performance. The middle ground of boost lag and overall boost pressure. Hell, there's no need for a TT setup on a Supra, a 300z, a WRX or EVO...but they're out there.
An example is the SRT, give a good manifold with twin stockers and you have just as much output as a big "laggy" turbo with faster spool. Port and clip those babys and you're going to be screaming. Tell me the sound alone wouldn't give a chub or two! On the other hand, they made that 2.4L for a turbo application. DCR is working with at least 500 Hp on the twin Mitsu stockers at a faster spool than a GT30 or GT35.
I like the open ended discussion though. Please, don't get the idea that I'm trying to shoot it down. Having seen heads blow from too much boost...I just want you guys to BE CAREFUL!!!
i think i just messed my pants.............
What is important here is that as more and more people do get this, that will lead to more and more people taking notice and making more and better parts for the Yaris. I see this turbo app now where is the guy going with the NA build. Id love to see be able to have my Yaris scream up to about a 10k rpm redline. Someone need to hook up with JUN or Top Secret and have them tune the Yaris. Awesome results btw.
Get AEM to do the EMS for the Yaris and you'll have 10K ability. You'll have to re-work the entire engine though from top to bottom...
I agree with the tuning idea. Demand is the mother of invention!
I agree with the tuning idea. Demand is the mother of invention!
The problem with the AEM is no DBW support.. So you're going to have hard wire in a EMS, while keeping your stock ECU for drive by wire.. which is no fun..Originally Posted by sqcomp ↑Get AEM to do the EMS for the Yaris and you'll have 10K ability. You'll have to re-work the entire engine though from top to bottom...
I agree with the tuning idea. Demand is the mother of invention!
Or convert to a cable throttle, which is still no picnic.. Wiring nightmare.
I also don't think you're going to be spinning a stock motor to 10k. Been there, done that, got the t-shirt.. or something..
Picture not included in this copy
Originally Posted by sqcomp ↑What's your boost level? I'd wish for lower boost levels BUT having seen N/A conversions, I'd imagine we're talking 10-14 lbs?
The pulley replacement is a logical thing. I like that. Doing anything with the stock motor mounts? Not being a supercharging guy, how does the idea of a larger (bored out) throttle body and polished instake manifold sound? Make it smooooooooth.
The meth injection might be a smart thing. Might look at a crank scraper and a fuel return line. I'm not overly familiar with the Yaris engine. Actually I need to stay away from it...I'll get myself into trouble. I'll just stick with stereos and my friend's turbos.
Just BE CAREFUL! I hate hearing about engines self-destructing. Keep that boost manageable.
Boost is between 7.5psi and 8psi. Nothing on the motor mounts. Can't port the manifold, it's plastic.. Throttle body, maybe, but it has a lot of ($$$) electronics in it..
Return style fuel system is only needed if you want to be able to bump the fuel pressure from stock, which is not really needed at this power level with these injectors.. The stock pump and fuel lines will flow fine at this level.
All I can say is.....this is the beginning of a REALLY good thing.
is this turbo thing will fuck your car up really fast? i mean i got no idea how turbo works and last in your car?
Ok guys I just read thru a lot of this so I will try to answer as many questions as I can if I miss one let me know.
Reliability:
A turbo car is as reliable as the tune, we have turbo tC with over 60k on it and our personal turbo xb with 40k of pure hell put through it these cars are on stock engines and our in perfect running order. If a car is tuned well with a well designed kit the car should last a very long time with an aftermarket turbo kit. I know we have all heard horror stories and I am sure the Yaris world will be no different. Just remember that it is what you make it, if you can’t afford to play then don’t.
You should only turbo the car when you have the ability to buy all the parts that are needed to make it run correctly. Most of this is included in the kit but you get the idea.
Performance
Our Yaris kits add roughly 100whp to mix; this will make for an exceptionally fast car taking in to consideration the weight. Low 14 high 13 ¼ passes are a reality with tires and a good driver.
This kit you will see some lag below 3k this is very minimal and the car accelerates so fast that you are not here for very long.
This kit will come on .6 bar roughly 6.5-7psi. This kit will add 2-5mpg to your already unreal gas mileage when driven in off boost settings (highway)
Price & availability
We will have these kits in stock at the end of next week. We have not decided on pricing yet but you can expect it to be in the 3-4k range. This will be a bolt on kit including everything needed to install and operate this kit. This is not like some of the other kits on the market that do not include fuel tuning components.
Stays tuned to ZPIracing.net for updates and let us know if you have any other questions. I am sure there are 100 grammatical errors in this post I am sorry it is late and I suck at English.
Reliability:
A turbo car is as reliable as the tune, we have turbo tC with over 60k on it and our personal turbo xb with 40k of pure hell put through it these cars are on stock engines and our in perfect running order. If a car is tuned well with a well designed kit the car should last a very long time with an aftermarket turbo kit. I know we have all heard horror stories and I am sure the Yaris world will be no different. Just remember that it is what you make it, if you can’t afford to play then don’t.
You should only turbo the car when you have the ability to buy all the parts that are needed to make it run correctly. Most of this is included in the kit but you get the idea.
Performance
Our Yaris kits add roughly 100whp to mix; this will make for an exceptionally fast car taking in to consideration the weight. Low 14 high 13 ¼ passes are a reality with tires and a good driver.
This kit you will see some lag below 3k this is very minimal and the car accelerates so fast that you are not here for very long.
This kit will come on .6 bar roughly 6.5-7psi. This kit will add 2-5mpg to your already unreal gas mileage when driven in off boost settings (highway)
Price & availability
We will have these kits in stock at the end of next week. We have not decided on pricing yet but you can expect it to be in the 3-4k range. This will be a bolt on kit including everything needed to install and operate this kit. This is not like some of the other kits on the market that do not include fuel tuning components.
Stays tuned to ZPIracing.net for updates and let us know if you have any other questions. I am sure there are 100 grammatical errors in this post I am sorry it is late and I suck at English.
Nice. Do you see those boost levels as the max...or rather the most you feel comfortable with going to for reliability?
Indeed...I think I called that 1/4 time. I would imagine that you'd rather use a wider street tire, DR or slick to get those 13 second times. The stock tires are NOT the first tire I'd choose to go racing with.
Strip the yaris down do some good suspension work like coilovers, sways, struts and some chassis braces underneath you could have a fun little SCCA car. As for the 1/4 mile...I guarantee you could probably sucker some rube into a few bucks by beating him in his civic SI or by beating the spread on estimates of your 1/4 mile time!
What ZPI said is absolutely TRUE! "if you can’t afford to play then don’t"! I have seen SO many kids crying about thier cars breaking when they push them hard. Be prepared for circumstances that are unforseen.
This is EXACLTY why you won't see me touching the engine of my Yaris. Not that I can't afford it, rather I DON'T want to. On the other hand, the stereo system and the vehicle's electrical system are my domain. I'm in full control there.
Bottom line guys, keep ahead of what you're doing, don't let Mr. Murphy kick you in your a$$! Let's see some more.
Indeed...I think I called that 1/4 time. I would imagine that you'd rather use a wider street tire, DR or slick to get those 13 second times. The stock tires are NOT the first tire I'd choose to go racing with.
Strip the yaris down do some good suspension work like coilovers, sways, struts and some chassis braces underneath you could have a fun little SCCA car. As for the 1/4 mile...I guarantee you could probably sucker some rube into a few bucks by beating him in his civic SI or by beating the spread on estimates of your 1/4 mile time!
What ZPI said is absolutely TRUE! "if you can’t afford to play then don’t"! I have seen SO many kids crying about thier cars breaking when they push them hard. Be prepared for circumstances that are unforseen.
This is EXACLTY why you won't see me touching the engine of my Yaris. Not that I can't afford it, rather I DON'T want to. On the other hand, the stereo system and the vehicle's electrical system are my domain. I'm in full control there.
Bottom line guys, keep ahead of what you're doing, don't let Mr. Murphy kick you in your a$$! Let's see some more.
Dammit still need to save up a few months to get myself some turbine action... and then...
ZPI guys, a couple of questions if I may, and this might be of interest to others too.
I've been going through your site and looking at the stuff you have for the xA/xB, and I'm quite interested in the potential with the low compression pistons and a turbo kit. What kind of gains have you guys managed with this combination? And what about with the Stage 1 head?
ZPI guys, a couple of questions if I may, and this might be of interest to others too.
I've been going through your site and looking at the stuff you have for the xA/xB, and I'm quite interested in the potential with the low compression pistons and a turbo kit. What kind of gains have you guys managed with this combination? And what about with the Stage 1 head?
Im not sure how strong the other internals are BUT once you go with low comp pistons you better start building the bottom end all together. I would say the thing to do is find you a wrecked Yaris and rape the motor out of it for cheap. Build that thing up in a spare room of your house over the winter. Then swap it in come spring.
🤤
😈
😈
The rods and pistons would allow you to run more boost, and make more power safely.
I had some questions. For someone who has never installed a turbo but has more than enough experience on cars(ive removed power steering pumps, water pumps, alternators, starters, swapped stock exhaust manifolds with headers, tons of wiring experience)how hard is the install? How long does it take? full day? weekend? can all this be done without removing tons of parts from the car? im sure removing the wiper blades, trim, wiper motor and that big sheet metal piece would make the install tons easier.....
It looked like a 5 speed in the dyno video, what are your thoughts on the auto? any things to worry about?
It looked like a 5 speed in the dyno video, what are your thoughts on the auto? any things to worry about?
yeah, it blowing to pieces. Can you imagine a econocar auto running 200hp when it was built economicall for 100? Not pretty. Besides, unless you're running 1000hp Supras or muscle cars, turboing a auto is lame....well, about as lame as auto cars in the first place.Originally Posted by 07typeS ↑
It looked like a 5 speed in the dyno video, what are your thoughts on the auto? any things to worry about?
Speak english!Originally Posted by jamal1984 ↑is this turbo thing will fuck your car up really fast? i mean i got no idea how turbo works and last in your car?
DID SOMEONE SAY THAT THIS TURBO KIT WILL BOOST YOUR FUEL ECONOMY?
IF SO.... IM ON MY WAY TO THE BANK!!!👍
Will this be cheaper on group buy? and you guys at ZPI should sell an -
"install kit only" without a Turbo with it... just suggesting so that more people would buy it because they can get a used turbo from their EVO buddies for a price of a Nintendo Wii!!!
IF SO.... IM ON MY WAY TO THE BANK!!!👍
Will this be cheaper on group buy? and you guys at ZPI should sell an -
"install kit only" without a Turbo with it... just suggesting so that more people would buy it because they can get a used turbo from their EVO buddies for a price of a Nintendo Wii!!!
If you're going to do pistons, you might as well ceramic coat them along with coating and replacing the valves and valve springs. Anyone done a head and cams for this little engine...is there a windage tray kit for this engine? Heck, go hardcore and do a 5 angle jobbie on the head.
Originally Posted by Nimble ↑yeah, it blowing to pieces. Can you imagine a econocar auto running 200hp when it was built economicall for 100? Not pretty. Besides, unless you're running 1000hp Supras or muscle cars, turboing a auto is lame....well, about as lame as auto cars in the first place.
lol dude come drive a 5 speed in la and see how long til you get tired of it.
and my question was how strong is the auto tranny, less or more than the 5 speed? they were both built for a 100hp engine so whats your point in that?
id appreciate someone actually answering some of my questions. thanks guys
Sorry I haven't been getting back to you guys.. I have been really busy and am kinda on vacation but I will try to be on to post some messages here and there.... Alright here goes the final dyno results we made 182 whp and 184 ft lbs of torque. As was already iterated the tune is safe we ran between a 11.2 and 11.6 for AFR which is safe and would keep you from blowing up your engine. The wastegate is controlled by the internal spring and is not adjustable by the owner unless you were to install a boost controller.
Yes you will get better fuel economy because Kenny was able to lean out the stock map in a safe way. I received about a 3-5 mpg increase in my drive down to Florida so it definatly gets better mileage.
As far as the stock auto tranny is concerned I am almost certain Zpi has done their turbo kit on the xb in an auto before but that would be easily solved by a quick call to them on monday but i am willing to bet that I remember hearing that. If not they deal with a guy that can make you upgraded valve bodies should you decide to increase your power levels beyond that.
As far as selling just the kit minus the turbo, it would be silly the turbo isnt that expensive to begin with, so then buying an old one off of a mitsubishi is a risky move as its seals could easily be bad, plus why be cheap about it. If you are going to buy a turbo kit for a brand new car wouldnt you want everything to be brand new just seems logical to me.
You can possibly run more boost on the stock engine they have had their XBs running 12 psi without a problem, on slicks at the track they did however snap an axle with that setup. So yes it is possible they just don't want to sell a kit for 12 psi because they aren't sure how long the engine can last at those levels. The more you boost the more a stock engine gets fatigued so that boost level was chosen to keep it safe and reliable.
Their is plenty you could do if you wanted to do a full engine build, it is more possible then you think as most of the parts are available to do a full build they just require some research and maybe a couple one off parts.
Thats about all i can come up with for now. If there are more questions fire away or pm me or whatever.
Yes you will get better fuel economy because Kenny was able to lean out the stock map in a safe way. I received about a 3-5 mpg increase in my drive down to Florida so it definatly gets better mileage.
As far as the stock auto tranny is concerned I am almost certain Zpi has done their turbo kit on the xb in an auto before but that would be easily solved by a quick call to them on monday but i am willing to bet that I remember hearing that. If not they deal with a guy that can make you upgraded valve bodies should you decide to increase your power levels beyond that.
As far as selling just the kit minus the turbo, it would be silly the turbo isnt that expensive to begin with, so then buying an old one off of a mitsubishi is a risky move as its seals could easily be bad, plus why be cheap about it. If you are going to buy a turbo kit for a brand new car wouldnt you want everything to be brand new just seems logical to me.
You can possibly run more boost on the stock engine they have had their XBs running 12 psi without a problem, on slicks at the track they did however snap an axle with that setup. So yes it is possible they just don't want to sell a kit for 12 psi because they aren't sure how long the engine can last at those levels. The more you boost the more a stock engine gets fatigued so that boost level was chosen to keep it safe and reliable.
Their is plenty you could do if you wanted to do a full engine build, it is more possible then you think as most of the parts are available to do a full build they just require some research and maybe a couple one off parts.
Thats about all i can come up with for now. If there are more questions fire away or pm me or whatever.
What what just said is VERY important.
When you guys buy this kit, keep it at it's predetermined level. As I'm reading, there are several options to raise boost level. The thing I'm reading that scares me is the Xb's axles *BREAKING* with slicks at 12 lbs.
This means that the vehicles they're going on ARE NOT DESIGNED for the increase in tourque and horsepower. I've heard of axles breaking on my old SRT at 450+ horsepower. I'm not trying to be a downer, I'm just saying BE CAREFUL with your investment.
It might not be a bad investment to send your tranny out to a place like Perfomance Autowerks to rework your internals. Is there a compny that offers beefier axles for the Yaris?
Remember, your vehicle is going to be ONLY as good as it's weakest point. As ZPI has said, you need to pay to play.
When you guys buy this kit, keep it at it's predetermined level. As I'm reading, there are several options to raise boost level. The thing I'm reading that scares me is the Xb's axles *BREAKING* with slicks at 12 lbs.
This means that the vehicles they're going on ARE NOT DESIGNED for the increase in tourque and horsepower. I've heard of axles breaking on my old SRT at 450+ horsepower. I'm not trying to be a downer, I'm just saying BE CAREFUL with your investment.
It might not be a bad investment to send your tranny out to a place like Perfomance Autowerks to rework your internals. Is there a compny that offers beefier axles for the Yaris?
Remember, your vehicle is going to be ONLY as good as it's weakest point. As ZPI has said, you need to pay to play.
Originally Posted by 07typeS ↑I had some questions. For someone who has never installed a turbo but has more than enough experience on cars(ive removed power steering pumps, water pumps, alternators, starters, swapped stock exhaust manifolds with headers, tons of wiring experience)how hard is the install? How long does it take? full day? weekend? can all this be done without removing tons of parts from the car? im sure removing the wiper blades, trim, wiper motor and that big sheet metal piece would make the install tons easier.....
It looked like a 5 speed in the dyno video, what are your thoughts on the auto? any things to worry about?
The install is not really that hard. The kit will include all the piping, bolts, nuts, clamps, etc. I would imagine the install would be an all day affair in the garage, but you might split it up over a weekend.
We put the turbo on from the bottom/side of the car, by removing the passeneger side wheel and sliding the axle out.. Which sounds worse than it might be.
Wiring is ~12 wires, only one of which has to be cut. The rest are splices.
If the automatic stayed the same between the xB and the Yaris, I wouldn't expect any problems. We've installed about 5 xB kits on autos and they run great. You can install a tranny cooler for added safety, and we'll be releasing a valve body upgrade in the next couple weeks. An upgraded torque converter is also a real reality, if we get enough interest.
To the person who suggested a no-turbo kit, the evo has a different flange than a typical mitsu. The cost difference between a kit with no turbo and a regular kit would be about $400.
Originally Posted by sqcomp ↑What what just said is VERY important.
When you guys buy this kit, keep it at it's predetermined level. As I'm reading, there are several options to raise boost level. The thing I'm reading that scares me is the Xb's axles *BREAKING* with slicks at 12 lbs.
This means that the vehicles they're going on ARE NOT DESIGNED for the increase in tourque and horsepower. I've heard of axles breaking on my old SRT at 450+ horsepower. I'm not trying to be a downer, I'm just saying BE CAREFUL with your investment.
It might not be a bad investment to send your tranny out to a place like Perfomance Autowerks to rework your internals. Is there a compny that offers beefier axles for the Yaris?
Remember, your vehicle is going to be ONLY as good as it's weakest point. As ZPI has said, you need to pay to play.
You can't compare a yaris to a SRT4, really.. Well, I guess you can.. SRT-4 comes out of the box with about 200-220hp.. You double that to 440, and you break axles..
xB comes out of the box with about 90hp, you increase that to 200hp, you break an axle when you accidently dump the clutch on slicks.
There are axles for the xB/xA. I don't know if they are bolt in for the Yaris.. Rated for 500hp, so I've heard.. :)
I also think more importantly than talking about the dyno numbers is how the car drives..
The car is a quick little booger... and with the stock hubcaps and the intercooler tucked away, it's a sleeper for sho.
One, if they were so inclined, could put a 5psi spring in there, with a AEM tru-boost, drive around on 5psi all the time, and then turn it up to 8psi when they're feeling froggy.
The car is a quick little booger... and with the stock hubcaps and the intercooler tucked away, it's a sleeper for sho.
One, if they were so inclined, could put a 5psi spring in there, with a AEM tru-boost, drive around on 5psi all the time, and then turn it up to 8psi when they're feeling froggy.