Yarisworld Archive

Any PICS of Fog Light SWITCH Location??

8 posts · 13,611 views

TRDMartyOriginal postCorona CA · May 29, 2012#1
Installing the Fog Light kit from MicroImage.
Hey everyone, I need your advice on where you installed your fog light switch.
It does appear that there is a couple of ''blank'' switch locations down under the e-brake console area. I was also looking at the area near the electric mirror switch under the driver side cup holder.
If you might have any pics of you installation of the fog light switch, can you please share them.
I'm very hesitant about cutting, just want to make sure. 🤷

Replies 7

CTScottUSA, CT · May 29, 2012#2
I used a lighted round rocker switch and mounted it next to the mirror controls. To me it made more sense to have it on the dash than on the console.

Picture not included in this copy
packetraceQuebec · May 29, 2012#3
Originally Posted by CTScott ↑
I used a lighted round rocker switch and mounted it next to the mirror controls. To me it made more sense to have it on the dash than on the console.

Attachment 47053
great idea....I will put it there too...and it make the wiring a lot easier..:)
CTScottUSA, CT · May 29, 2012#4
Originally Posted by packetrace ↑
great idea....I will put it there too...and it make the wiring a lot easier..:)
Just make sure that if you go for an illuminated switch that you purchase one with the lighting and switching separate (typically with 4 terminals - 2 for switching, 2 for lighting). The nice thing about wiring it there is that you are right next to the steering column and also the illumination wiring can be done to the dimmer rheostat wiring.
TRDMartyThread starterCorona CA · May 29, 2012#5
Originally Posted by CTScott ↑
I used a lighted round rocker switch and mounted it next to the mirror controls. To me it made more sense to have it on the dash than on the console.

Attachment 47053
That was my primary choice. You're right, it makes more sense.
However, the switch that was provided in the kit is rectangular in shape.
I'm hoping that Garm or Jeff @ MicroImage might chime in on this.
I actually like the round switch you have better than rectangular one.
Where did you get the round switch?????
packetraceQuebec · May 29, 2012#6
You probably can get it at radioshack if youre in US :)

Don'T worry scott :D I know that :) And good idea on the rheostat wiring :D
CTScottUSA, CT · May 29, 2012#7
Originally Posted by TRDMarty ↑
That was my primary choice. You're right, it makes more sense.
However, the switch that was provided in the kit is rectangular in shape.
I'm hoping that Garm or Jeff @ MicroImage might chime in on this.
I actually like the round switch you have better than rectangular one.
Where did you get the round switch?????
From helping quite a few people out with fog light installs, I can tell you that most mount the included switch in place of one of the knock-outs in the console (which does require opening up the hole a tad).

I bought the switch I used from Digikey:

http://www.digikey.com/product-detai...701301?cur=USD
CTScottUSA, CT · May 29, 2012#8
Originally Posted by packetrace ↑
You probably can get it at radioshack if youre in US :)

Don'T worry scott :D I know that :) And good idea on the rheostat wiring :D
It's actually pretty hard to find an illuminated switch where the switch and light are completely separated.