racerbOriginal postLeland, NC · May 24, 2012#1Right now I'm looking at ways to prep the Yaris for H-Stock auto-x, but I'm also building a Celica GTS road racing machine. Well if that aint enough, I'm also refurbishing an old enclosed race trailer and trying to finish my race shop. Ok so maybe I can get the Team Owner to work harder, oh wait thats me, ok maybe the Mechanic, oh thats me too, I know I'll get the Driver, crap thats me as well!! Any way heres some pics of a couple of my projects that are slowly coming togather.
The Race Shop as it looks right now!
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
The enclosed trailer with new work bench/tire rack, ramp door minus diamond plate runners (ordered) and E-Track installed both sides front to rear, still deciding on ceiling repair/insulating!!
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Replies 24
CrankyOldManWest Michigan · May 24, 2012#2Well, you're farther ahead than I am: all I have is a shed full of bikes and tools, and a stack of partially dismantled transmissions on a workbench at the university... =)
SpidermandudJohnson City, Tennessee · May 25, 2012#3Got any pics of the celica? :D
racerbThread starterLeland, NC · May 25, 2012#4 Originally Posted by
CrankyOldMan ↑ Well, you're farther ahead than I am: all I have is a shed full of bikes and tools, and a stack of partially dismantled transmissions on a workbench at the university... =)
Which University? I work for UNC-Wilmington!!
racerbThread starterLeland, NC · May 25, 2012#5 Originally Posted by
Spidermandud ↑ Got any pics of the celica? :D
I can post a few, but right now it kinda looks like a bomb went off in the shop, Toyota parts every where!! 🙁
CrankyOldManWest Michigan · May 25, 2012#6I'm a student at Grand Valley State in MI. The shop supervisor was kind enough to allow me a bench in the vehicle bay for personal use.
racerbThread starterLeland, NC · May 25, 2012#7Ok, that makes sense, I'm actually about a year away from retiring with 30 years of State Service, or as I like to say, my pardon from the Governor!! 😁
racerbThread starterLeland, NC · May 25, 2012#8Pics of my Celica, this one in happier days at Virginian International Raceway!
Picture not included in this copy
This was VIR before I switched to coil-over suspension, check the body roll!!
Picture not included in this copy
After coil-overs with KYB AGX inserts and Drop-Zone coil springs, almost zero body roll!
Picture not included in this copy
The way she looks today, a total work in progress!
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
My JDM Gen 1 engine waiting to go in, might go through it for a little freshening before install!
Picture not included in this copy
racerbThread starterLeland, NC · May 25, 2012#9Well todays project was wash and clean up the Yaris. Had just finished washing it and now one of the worst rain storms we've had all year! Came in doors to check the Weather Channel and guess what, we've got a Tropical Storm forming off the coast, you can thank me later!!
racerb 😳
Jason@SportsCarDebary, FL · May 25, 2012#10Maybe a little less posting on YW and a little more work on projects. 😆
racerbThread starterLeland, NC · May 25, 2012#11 Originally Posted by
Jason@SportsCar ↑ Maybe a little less posting on YW and a little more work on projects. 😆
I've tried that approach, but at my age I can bearly get outta bed the next morning!! 🍻
SpidermandudJohnson City, Tennessee · May 25, 2012#12Looks like you're having fun to me :P. Thanks for the pics, I enjoyed them
How's that Ryobi impact working for you?
mazillaSan Jacinto California · May 26, 2012#14The projects never seem to end. Right now I'm working on..
1. Yaris
2. 70 Cougar
3. 06 Jeep Wrangler
4. 96 Tracker boat restoration(just bought this one on Tuesday)
I just finished a flat bed/boat trailer conversion. I made the boat trailer from my last boat into a flatbed for my DIY motorized kayaks(another project).
Needless to say I've been catching a lot of crap from the wife for basically living in my garage. :)
cali yarisCanoga Park, CA · May 26, 2012#15 but at my age I can bearly get outta bed the next morning!!
Just wait, son.... 😲
racerbThread starterLeland, NC · May 26, 2012#16 Originally Posted by
cali yaris ↑ Just wait, son.... 😲
Yea I'm only 50, but years of riding skateboards, racing BMX, ATVs, and Sportscars, plus 3 different Wives (this one's a racing nut) have just worn me down!! 🙁
racerbThread starterLeland, NC · May 26, 2012#17 Originally Posted by
sex ↑ How's that Ryobi impact working for you?
It's not the most powerful, but driving screws in the enclosed trailer frame (mounting E-track) is a snap!!
racerbThread starterLeland, NC · Jun 1, 2012#18First Gen JDM 3SGE all stripped down and ready to go in for a re-fresh. Hopefully only rings, rod, and main bearings, want know for sure till we crack it open! Easy way to identify the JDM is the Yamaha name cast into the head, USDM model don't have this.......
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
racerb
SailDesign. · Jun 1, 2012#19 Originally Posted by
racerb ↑ Yea I'm only 50, but years of riding skateboards, racing BMX, ATVs, and Sportscars, plus 3 different Wives (this one's a racing nut) have just worn me down!! 🙁
Only 50? Kid! 🙂
racerbThread starterLeland, NC · Jun 1, 2012#20Ok thanks Old Fart or is that Phart!! 😁
SailDesign. · Jun 2, 2012#21Always Phart. Ever since an email filter threw out a mail with "fart" in it, as being offensive. :dumb:
racerbThread starterLeland, NC · Jun 2, 2012#22Understood!!
racerbThread starterLeland, NC · Jun 5, 2012#23Finally making some real progress on the Race Shop, only have a few more things to do and can move in!! Just a little more molding to install and maybe put up different lights, but aside from that, might actually move in this weekend!! 👏
Picture not included in this copy
Picture not included in this copy
And when that is finished it's time to add on the lean to, which will have a concrete slab thick enough to support a 2-post lift for actually getting under the cars!
Picture not included in this copy
Picture not included in this copy
racerb 👍
racerbThread starterLeland, NC · Jun 5, 2012#24racerbThread starterLeland, NC · Jun 12, 2012#25Well didn't get moved in this past weekend, but made lots of progress and should be able to start bringing a few thing over later this week. I'll post some more pics of how she looks right now, with just a few loose ends to tie up, hopefully tonight!
racerb 😳