Yarisworld Archive

Quick question about setup

10 posts · 4,149 views

razingmanOriginal postthe hammer · May 21, 2012#1
So all I have right now is a and one pair of hertz esk-165s. I have a 2007 liftback, now do I actually need a harness and dashkit or is that just something to make it look pretty? I plan on getting an amp and sub later and not having any rear speakers.

Replies 9

_S7V7N_South Texas · May 21, 2012#2
Think you left out some info. Are you adding a headunit as well ?

If so you need a wire harness and a dash kit.

SqComp can probably give you more info on them Hertz.
razingmanThread starterthe hammer · May 21, 2012#3
Yes, forgot to CP it in, dumb me.
It's a AVH-P1400DVD double din.
Why do you need the harness?
_S7V7N_South Texas · May 21, 2012#4
Okay a bit of research will need to be done for the dash kit for a double din Unit.

Picture not included in this copy

One end of the harness connects to your factory connector and the other end with the wires is color coded to connect to you aftermarket radio harness.

Here's a pic of the back of that unit and the wire harness that connects to the harness listed above

Picture not included in this copy
razingmanThread starterthe hammer · May 21, 2012#5
Got it, for tweeter placement, do you think on that front dash top of the window , bottom of the window or on the pillar would be best?
razingmanThread starterthe hammer · May 21, 2012#6
Okay, got it, thought the connectors in the back were just the exact same cables.
_S7V7N_South Texas · May 21, 2012#7
SqComp can probably better guide you for placement. What I would recommend is an amp for that component set. I don't think they'll reach there full potential off the headunits power.
sqcompBack at home · May 21, 2012#8
So you've got the 6" Energy component set?

The tweeters will help stage height if they're up in the pillars. As far as aiming, look for a spot as close to the glass and more on axis since they're a smaller 20mm format and you're probably using the crossover that comes with the set.
_S7V7N_South Texas · May 21, 2012#9
Originally Posted by sqcomp ↑
So you've got the 6" Energy component set?

The tweeters will help stage height if they're up in the pillars. As far as aiming, look for a spot as close to the glass and more on axis since they're a smaller 20mm format and you're probably using the crossover that comes with the set.
What about powering them puppies up Sq ? What do you recommend ?
razingmanThread starterthe hammer · May 21, 2012#10
I was thinking of getting an amp in a couple of weeks when I have the money for a great one and a sub, I care more for quality then noise