Yarisworld Archive

FS-circuit hero shift lever extender

30 posts · 6,316 views

08peanutOriginal postUT · May 14, 2012#1
Sold!!! Thank you guys
Oh yeah I'm not a vendor

Replies 29

BEEFnorth carolina · May 14, 2012#2
um...doesn't garm sell these for like $19?

and he is a supporting vendor...

and you can chose between 2" and 3"...

so that would be 50 and 75mm (roughly)

just sayin'

interesting first post though.
GolddeenohColumbia, SC · May 14, 2012#3
probably shit box rip off trying to sneak back in. Garm's are 18.95 shipped.
suckerfaceMilwaukee, WI · May 14, 2012#4
Again, thinking there needs to be more requirements for posting up in the BST section. Either a vouch from a current member in good standing, or a minimum of 10-15 posts.
tooterLos Angeles · May 14, 2012#6
Wow... and I'm thinking about cutting my shifter shorter. 😛
08peanutThread starterUT · May 15, 2012#7
I feel the love here lol this extender is not Billet aluminum but stainless, its not 2 or 3 inch but 4 and counterweighted genuine Circuit Hero and very nice part
Profotoiamgarden grove ca · May 15, 2012#8
Funny shit ^^^^^ not sure which of yous needs aslapin
poorsh2ne ct · May 15, 2012#9
Stainless, that sounds heavy. won't the added weight make my yaris slower. I think I will go with the MI weight saving extension.

MI FTW
cali yarisCanoga Park, CA · May 15, 2012#10
same product is thirty bucks shipped on eBay. 😉
TickleTimeTimArkansas · May 15, 2012#11
Gonna have to start a troll thread. Haha
suckerfaceMilwaukee, WI · May 15, 2012#12
@jpmck03> jerk move with that signature...I love it ;)
blacksandiegovitzJust chillin' out brah ! · May 15, 2012#13
I have a circuit hero velocity stack...
jpmck03USA · May 15, 2012#14
Originally Posted by suckerface ↑
@jpmck03> jerk move with that signature...I love it ;)
What you talkin' 'bout? 😁 It's just some links to my "articles" and a picture of my car... See:
GolddeenohColumbia, SC · May 15, 2012#15
🤣 Liked the sig move 👍

at least it is car parts, there was some guy on here hacking phones or something random at us the other day, and it wasn't even posted in a logical place, lol.

maybe limiting the size of someone's first like 25 or so post to 4 or five lines and no uploading attachments until after that.
tooterLos Angeles · May 15, 2012#16
Tough crowd here...

No 🙌 at all. 😆
08peanutThread starterUT · May 15, 2012#17
Originally Posted by blacksandiegovitz ↑
I have a circuit hero velocity stack...
How do you like the Circuit hero velocity stack!
Bump
08peanutThread starterUT · May 15, 2012#18
Thank you guys for keeping my post on top!
why?harnett county NC · May 15, 2012#19
Originally Posted by TickleTimeTim ↑
Gonna have to start a troll thread. Haha
i think it has been started. op has to be a troll.

and without a real admin that cares i doubt you can limit who posts where.

Oh and Tooter, to make sure I understand you, don't physically cut the shifter, short shift kits make the shifts much shorter.
suckerfaceMilwaukee, WI · May 15, 2012#20
But cutting the shifter lowers the height of the stick, which I know a couple other members have done, and I plan on doing at some point soon. I have the NST engine bay SSK, and I love the shorter throw, but the stick is just too damn high!
tooterLos Angeles · May 15, 2012#21
Originally Posted by why? ↑
Oh and Tooter, to make sure I understand you, don't physically cut the shifter, short shift kits make the shifts much shorter.
Oh, I don't care about a short throw, just a short shifter. 🙂
Did the old Tacoma work truck years ago...

Picture not included in this copy

...works really cool.
cali yarisCanoga Park, CA · May 15, 2012#22
Fine for the street, but for racing you want the shift knob as close to the wheel as possible. So we shorten the throw and extend the shifter.

Just a different approach. But especially in the Yaris, the shifter is very far from the wheel; shortening it could actually cause some people to have to shift their body position to reach it -- *not recommended*.
tooterLos Angeles · May 15, 2012#23
I can understand that would be a definite advantage for racing...

...but since I'm no racer. 😉
suckerfaceMilwaukee, WI · May 15, 2012#24
So would it make sense to shorten it, re-thread it, and get a REALLY long extension for track days, or will that just cause issues?
mr_milesPortland, OR · May 15, 2012#25
Originally Posted by suckerface ↑
So would it make sense to shorten it, re-thread it, and get a REALLY long extension for track days, or will that just cause issues?
I thought about that. But I don't have a spare shifter to do it with, lol.
eTiMaGoBangkok, Thailand · May 15, 2012#26
I'd still recommend getting a TWM short shifter rather than just hacking your stick down!
tooterLos Angeles · May 16, 2012#27
...except hacking is cheaper and more fun. 🙂
33OHDover, Ohio · May 16, 2012#28
I just hacked mine down, about 3 years ago. Took 3.25" off if I remember correctly. Love it. :)
Profotoiamgarden grove ca · May 16, 2012#29
Originally Posted by mr_miles ↑
I thought about that. But I don't have a spare shifter to do it with, lol.
Well your in luck op is selling one rofl
08peanutThread starterUT · May 16, 2012#30
Sold!