Yarisworld Archive

Build thread! '08 Yaris Hatch

105 posts · 56,183 views · page 1 of 3

nimuntakOriginal postCalgary, Alberta, Canada · May 12, 2012#1
Hi, I bought this car back in December of 2011. When I bought it one thing ran through my mind.. how am I going to modify this thing so it looks like mine. Me being a girl afterall needed to add few girly touches to this car; not that the car doesn't look girly enough overall, but I wanted to make it stand out.
It's been fun with this little thing. Here are a few photos I have taken for my build journey!

Picture not included in this copy


Okay, enough of the boring stock photos of my car, here are the mods I started doing (in order of modifications!)


Picture not included in this copy
I like the look of badge-less hatches, so I simply removed the 'yaris' and 'toyota' to give it a cleaner look.


Picture not included in this copy
Wheels in my opinion are the most important part to a car. They enhance the overall look. I decided to go with some Axis OG Sakuras (in pink of course). 'Sakura' in Japanese means cherry blossom. The center face of the wheel resembles a blossom figure. Wheel size is the standard OG Axis size, 15/8. This was the day I brought my little blossoms home!

Picture not included in this copy
The lovely gents at Urban X mounted my wheels for me. I chose at 195/45 for the wheel to give it a bit of stretch.


Picture not included in this copy
I decided to go with the JDM Yaris badge. The 'Vitz' logo is more aggressive and adds a slight uniqueness to the appearance of the front end.


Picture not included in this copy
Picture not included in this copy
Since my model doesn't come factory with fogs, I thought i'd buy a set and install them. Also, adding a more aggressive look to the front end.

Picture not included in this copy
It was a difficult decision to whether I should order lowering springs, or coil overs. I tossed the choices back and fourth. I put in an order for Tein S-tech springs, but after short realization I noticed it might not drop my car as much as I'd hope it would. I cancelled that order and instead I ordered Tein Street Basis coil overs to give me the option to adjust the ride height and have a stiffer suspension so there is less body roll.

Picture not included in this copy
Here's a picture of the day my coil overs were installed.


Picture not included in this copy
Hours later after coils were installed... wheels went on!


Picture not included in this copy
The final mod I have recently just added was the tiny lip added onto the front bumper.


And finally after all of these pieces put together, heres a shot of the way it's looking today!

Picture not included in this copy


Hope you enjoy my photographic journey!

- N

Replies 104

CrankyOldManWest Michigan · May 12, 2012#2
Well done!
ilikericesavannah, ga · May 12, 2012#3
sweet ride.. nice touches.. what offset are those 15x8 wheels if you dont mind me asking?
ijose 845Orange County, NY · May 12, 2012#4
Hey welcome to yaris world! :) im jose3293 from instagram
Nice Yaris! keep it up!
spocksleftballflorida · May 12, 2012#5
Bravo! Dont think the yaris is girly, I think it is more gnomish...

But I like the touches youve added. Now you need the hello kitty tailpipe :'D
FreestylinCalgary, Alberta · May 13, 2012#6
She's a beauty Nikki! the coolest chick in Calgary to roll in a yaris! :)

P.S.. Love those wheels..but I think my bronze would be cooler on your ride :D
nimuntakThread starterCalgary, Alberta, Canada · May 13, 2012#7
Originally Posted by ilikerice ↑
sweet ride.. nice touches.. what offset are those 15x8 wheels if you dont mind me asking?
Thank you! They're +25. They poke a bit in the front... But I'm planning on getting new wheels with +42 so they'll be more flush :)
nimuntakThread starterCalgary, Alberta, Canada · May 13, 2012#8
Originally Posted by Freestylin ↑
She's a beauty Nikki! the coolest chick in Calgary to roll in a yaris! :)

P.S.. Love those wheels..but I think my bronze would be cooler on your ride :D
Thank you Ray!!

Haha oh I know! I'm hoping the sakuras sell :( boo hoo
ilikericesavannah, ga · May 13, 2012#9
Originally Posted by nimuntak ↑
Thank you! They're +25. They poke a bit in the front... But I'm planning on getting new wheels with +42 so they'll be more flush :)
Yep, you can definitely tell the stick out a bit more in the front. When you say more wheels, do you mean 2 more to replace the front 15x8 +25 with 15x8 +42? or just a whole new set altogether?
oliveskateCanada · May 13, 2012#10
A girl who work's in cars, that live's in Calgary. Dream come true haahah jk.
Nice yaris tho! How do you like the coil overs? I was looking at thoses ones.
vtencolumbus · May 13, 2012#11
nice build ...the pink wheels r kinda grow on me :P

kudos for a girl that loves to modify a car instead of buying shoes n purses !
nimuntakThread starterCalgary, Alberta, Canada · May 13, 2012#12
Originally Posted by ilikerice ↑
Yep, you can definitely tell the stick out a bit more in the front. When you say more wheels, do you mean 2 more to replace the front 15x8 +25 with 15x8 +42? or just a whole new set altogether?
Yeah I was planning on getting 3 degree camber in the front but I'm selling these wheels anyways, so there's no point.
And I'm hopefully getting a set of 5zigen zr 520's 17/7 +42.
nimuntakThread starterCalgary, Alberta, Canada · May 13, 2012#13
Originally Posted by oliveskate ↑
A girl who work's in cars, that live's in Calgary. Dream come true haahah jk.
Nice yaris tho! How do you like the coil overs? I was looking at thoses ones.
Hahaha well thanks :p. and the coil overs aren't bad. The ride in my car is fairly uncomfortable because my coils are maxed and they're super stiff. Plus I bought them brand new so the springs still need to wear in.
thebarberGrand Rapids, MI · May 13, 2012#14
I like the look...the pink rims and drop are awesome.
racerbLeland, NC · May 13, 2012#15
Good looking ride, I always like it when girls are into cars and know how to wrench on 'em too. Keep up the good work and post more pics of your sweet little Yaris!!

racerb 🤘
oliveskateCanada · May 13, 2012#16
Originally Posted by nimuntak ↑
Hahaha well thanks :p. and the coil overs aren't bad. The ride in my car is fairly uncomfortable because my coils are maxed and they're super stiff. Plus I bought them brand new so the springs still need to wear in.

It's always good to see more canadians on here, especially in Alberta! And okay thanks! Still thinking if I want to drop mine or not. Damn Alberta snow :P
nimuntakThread starterCalgary, Alberta, Canada · May 13, 2012#17
Originally Posted by oliveskate ↑
It's always good to see more canadians on here, especially in Alberta! And okay thanks! Still thinking if I want to drop mine or not. Damn Alberta snow :P
DROP IT. always drop it LOL. That's how I see things anyways. I would suggest coils though so you can raise it up for winter
vtencolumbus · May 15, 2012#18
Originally Posted by nimuntak ↑


Yeah I was planning on getting 3 degree camber in the front but I'm selling these wheels anyways, so there's no point.
And I'm hopefully getting a set of 5zigen zr 520's 17/7 +42.

Im selling my Gold 5zigen 5zr rims, it's the magnesium barrel's one, made by Rays Engineering, real 2pcs wheels, but it's 18" x7.5 +44 ...... interested ? :P
nimuntakThread starterCalgary, Alberta, Canada · Jun 4, 2012#19
Picture not included in this copy

Headlights :)
nimuntakThread starterCalgary, Alberta, Canada · Jun 20, 2012#20
Here are a few shots from DTP 2012!

Picture not included in this copy

Picture not included in this copy
403RSCalgary, Canada · Jun 20, 2012#21
What a beaut. I'm sad I was out of town that weekend. :(
DeathBeardLos Angeles, CA · Jun 20, 2012#22
excellent👍
1.5Tampa · Jun 21, 2012#23
Nice! I almost picked up a set of sakuras as well. Its so nice to see more and more "stanced" Yarii.
mr_milesPortland, OR · Jun 22, 2012#24
i want to get a set of those wheels for my miata! at least now i know what they'll look like my gnar too :) they look good.
yaris_ninjaYonkers, NY · Jun 22, 2012#25
Hey i was reading the part when u were debating on coilovers or lowering springs. I went with the springs and they dropped my yaris 2inches. Your car still looks kinda high in the front but the rear looks just like mine. Nice tinted head lights. I am planning to get a set of headlights. I did order a set od taillights but it seems like the aftermarket tails were only made for the 2dr hatch and not the 4dr hatch that i have. so yeah good job with ur yaris.
nimuntakThread starterCalgary, Alberta, Canada · Jul 14, 2012#26
Hey everyone! So as sad as this is, I'm selling my Yaris. I'm going to be selling parts for it.

Tein Street Basis Coil Overs : $1000.00
4 Window visors : $30.00
Vitz Front Emblem : $10.00

Message me if you're interested, or text me

(587) 894-2501

I'm located in Calgary, but am willing to ship out parts!
yarisugiハワイ · Jul 14, 2012#27
Post your items in the "Items for Sale" section.
1.5Tampa · Jul 14, 2012#28
Those coilovers are cheaper new. And no sakuras???
nimuntakThread starterCalgary, Alberta, Canada · Jul 14, 2012#29
Originally Posted by 1.5 ↑
Those coilovers are cheaper new. And no sakuras???

I guess so, I paid 1300 for mine, I just don't wanna lose too much. And the Sakuras are already sold!
1.5Tampa · Jul 14, 2012#30
Damn those Mounties are driving up the prices
KillchainAlbuquerque · Jul 14, 2012#31
At first the bubble gum pink shocked me, yet I do like how they look mounted and on the road. Great Job! 👍
FreestylinCalgary, Alberta · Jul 16, 2012#32
Originally Posted by nimuntak ↑
Hey everyone! So as sad as this is, I'm selling my Yaris.
NNNNNNNOOOOOOOOOOOOOO!!!
nimuntakThread starterCalgary, Alberta, Canada · Jul 17, 2012#33
Originally Posted by Freestylin ↑
NNNNNNNOOOOOOOOOOOOOO!!!


I know :( I'm just not happy with it anymore.

I'm getting a 92 mazda mx5 ;D
DeathBeardLos Angeles, CA · Jul 17, 2012#34
👍 very nice
403RSCalgary, Canada · Jul 17, 2012#35
Originally Posted by nimuntak ↑
Hey everyone! So as sad as this is, I'm selling my Yaris. I'm going to be selling parts for it.

Tein Street Basis Coil Overs : $1000.00
4 Window visors : $30.00
Vitz Front Emblem : $10.00

Message me if you're interested, or text me

(587) 894-2501

I'm located in Calgary, but am willing to ship out parts!
texted re: the emblem and visors
nimuntakThread starterCalgary, Alberta, Canada · Apr 29, 2013#36
So... a bit of an update...

As I shuffled around the idea of selling my yaris, I realized that I own this yaris, i've put my time and money into it so why not keep it. I had parked it for the winter and bought a cheapie winter beater (mk2 jetta) and after many problems with the jetta I felt more compelled to bring my yaris back out on the road. I went to my uncle in-law's house (where yaris was parked) and brought her home. It felt so good to be behind the wheel of my little silver egg again.
After lot's of time and thinking and shuffling around so many ideas for which wheels to get and which suspension to get I decided to go a bit bigger than I did last year. I was disappointed with the appearance of my car last year so I decided this year I wanted to make it look better...

The verdict: 17" Rotiform BLQ's and AirRunner suspension.

I'm so happy I decided to get 17's as last year the 15's were just too small for me and I've always loved the idea of air suspension so I saved up a bunch of money and bought Air Runner air suspension.

I dropped my car off at Zero Limit Auto this Saturday to get the suspension installed. The service there is incredible and it's such a comfortable shop to be in. My car should be out of the shop today or tomorrow, which is super exciting!

Picture not included in this copy
Here's a little snap of my wheels, taken last week!

Picture not included in this copy
The tank and compressor waiting to get bolted on...

Picture not included in this copy
Front!

Picture not included in this copy
Rear!

Picture not included in this copy
Little egg hanging out

Picture not included in this copy
Decided the gauges are going to be mounted inside the cubby behind the wheel. Easily accessible but hidden!



Will be posting more updated photos when the car is put together!

-N
1.5Tampa · Apr 29, 2013#37
Anti-air!!!!

but nice wheel choice and the car should look dope once done.
nimuntakThread starterCalgary, Alberta, Canada · Apr 29, 2013#38
Originally Posted by 1.5 ↑
Anti-air!!!!

but nice wheel choice and the car should look dope once done.

Hahah to each their own! I just wasn't happy with my car last year on coils so I wanted more!

But thanks!! I am pretty excited 👍
FreestylinCalgary, Alberta · Apr 29, 2013#39
Say wut? Welcome back! 🙂 This will probably be the first stanced out Yaris I've seen in Calgary. Great job! Will your car be at Driven 2013? Mine is still hibernating for the time being until all my ordered parts from last year and this year are installed..lol
nimuntakThread starterCalgary, Alberta, Canada · Apr 30, 2013#40
Originally Posted by Freestylin ↑
Say wut? Welcome back! 🙂 This will probably be the first stanced out Yaris I've seen in Calgary. Great job! Will your car be at Driven 2013? Mine is still hibernating for the time being until all my ordered parts from last year and this year are installed..lol

Hahah thanks!! And YUP! I will be at Driven. Just finalized my registration yesterday w/ Illmotion 🙂 I am pretty excited. It was fun last year so I'm sure this year will be even better!

What did you all order?!??!
yarisugiハワイ · Apr 30, 2013#41
I'm curious, on your air runner front strut what serial number is stamped on there? I'm sure the number must be a low number since there aren't many.
mr_milesPortland, OR · Apr 30, 2013#42
Dangit! Someone beat me to buying those wheels...... I'll be interested in your tire choice. what offset are they?
nimuntakThread starterCalgary, Alberta, Canada · May 1, 2013#43
Originally Posted by yarisugi ↑
I'm curious, on your air runner front strut what serial number is stamped on there? I'm sure the number must be a low number since there aren't many.
My serial number is 00005. So I have the fifth set made :)
nimuntakThread starterCalgary, Alberta, Canada · May 1, 2013#44
Originally Posted by mr_miles ↑
Dangit! Someone beat me to buying those wheels...... I'll be interested in your tire choice. what offset are they?
Hahah they're +30. I had 15x8 +25 last year and I didn't like the fitment. Poked out too much so I went for a higher offset :)
nimuntakThread starterCalgary, Alberta, Canada · May 1, 2013#45
Picture not included in this copy

Picture from last night. Here is the beast with the suspension in. Putting the wheels on tonight too! More pictures to come :)
SilverSquash!South Africa · May 1, 2013#46
Looking HAWT!! Can't wait to see the Roti's on :D
TerenceCruzCali · May 2, 2013#47
She's lookin great! I also can't wait to see the new wheels on! :)
1.5Tampa · May 2, 2013#48
so lowwwww
nimuntakThread starterCalgary, Alberta, Canada · May 2, 2013#49
Picture not included in this copy

Picture not included in this copy

Here's a few photos from last night! I have to roll my fenders for my car to air out all the way. I'm only running 20 psi in these photos because the fender is sitting on the tire.
Will be rolling them this weekend, so HOPEFULLY I am able to air out all the way ;)
1.5Tampa · May 2, 2013#50
wow that came out beautiful. Try and drive it that way, oh wait not static lol