Yarisworld Archive

Head First in the deep end

44 posts · 12,371 views

GolddeenohOriginal postColumbia, SC · May 9, 2012#1
Ordered this stuff last night from Micro Image 😳


ARP Exhaust Manifold Stud Kit
SGII ScanGauge II
Tanabe Front Strut Tower Brace
MI Lightweight Crank Pulley™
Megan racing header - Yaris
AEM cold air intake - YARIs Color: Red
NRG Grounding Kit Color: Red
NST Alternator Pulley Color: Red
NRG carbon fiber shift knob
DC Sports axle-back exhaust
Foglight Kit - YARIS Liftback/Sedan Bezel Style: 2009-2011 Liftback
Silicone Radiator Hoses - YARIS Color: Red
Tanabe Front SwayBar -Yaris/XD

Now Garm Pack my Boxes. 🤤

Replies 43

suckerfaceMilwaukee, WI · May 9, 2012#2
Oh man, lucky you! You'll have a blast getting all of that stuff in, be sure to get us plenty of pics!
eTiMaGoBangkok, Thailand · May 9, 2012#3
and so it begins :)
allyartJakarta, Indonesia · May 9, 2012#4
did i smell a wallet burning? 😆
eTiMaGoBangkok, Thailand · May 9, 2012#5
I love the smell of melted credit card in the morning 😆
tooterLos Angeles · May 9, 2012#6
It's like Christmas in May. 🙂
Klink10910 · May 9, 2012#7
Ka-ching. Congrats. Have fun and if you ever get to NC look me up.
GolddeenohThread starterColumbia, SC · May 9, 2012#8
I had the TRD sway bar put on at the dealership when I bought it and I was limiting myself a little. it is already lowered 1.8 inches on Drag-19 in 15inch.

I will probably get the Tanable front sway bar after a little while though.
RcJoshHumble · May 9, 2012#9
🙇how much did all that run for
GolddeenohThread starterColumbia, SC · May 10, 2012#10
Originally Posted by RcJosh ↑
🙇how much did all that run for
Which thing the order or having the TRD sway bar put on at the dealership?
1.5Tampa · May 10, 2012#11
The TRD sway prolly cost twice as much as that entire order lol
GolddeenohThread starterColumbia, SC · May 10, 2012#12
it only added 200 to the car price but I had already knocked the price of the car down to 14 even and they installed it as part of the negotiated price.

the loweing springs i believe cost me 120 but i bought them off of my mother-in-law and install and alignment was 50 or 60

the Drag-19s where on sale so i lucked out and got those shipped for 350 and installed on the factory tires.
cali yarisCanoga Park, CA · May 10, 2012#13
That is going to be FUN. I think I'd go on overload just deciding what to do first.

But I digress.... I better get out some boxes... 😁
GolddeenohThread starterColumbia, SC · May 10, 2012#14
nose to trunk, I'll start with removal of the front bumper and put the fogs in then go ahead and remove what will be replaced in the engine bay, starting with fluids seeing as i'm a few hundred miles from an oil change might as well go ahead and do one myself while i'm down there. while fluids are draining, i will change out the pulleys and once the fluids are completely drained i will go to the hoses and change out what is in the kit and then refill the fluids. follow that with installation of the header and intake. after that the grounding kit and the strut tower brace. once that is complete re-install the front bumper and run the wires for the fog. then lift the rear and install the exhaust. after that i go into the interior and finish the fog lights, the Scanguage II, and install the shift knob. then test drive time.
1.5Tampa · May 10, 2012#15
wow youve got a good plan set up there. Keep us updated and as always... pics!
GolddeenohThread starterColumbia, SC · May 11, 2012#16
Originally Posted by cali yaris ↑
That is going to be FUN. I think I'd go on overload just deciding what to do first.

But I digress.... I better get out some boxes... 😁
hope you didn't drool all over the boxes this time. 🤤
GolddeenohThread starterColumbia, SC · May 11, 2012#17
🤤 In the mail should have everything by the end of next week for a weekend project. probably will start off Friday. then lots of cursing and swearing to get the bolts off and get the new parts on. I'm so excited it is hilarious to see, lol. 😳
1.5Tampa · May 12, 2012#18
befores/afters please
cali yarisCanoga Park, CA · May 12, 2012#19
Two boxes went out yesterday. Very few peanuts, no room. LOL

Last box goes out approx. Tuesday, but I'll make sure you have your stuff for the weekend. 🙇
GolddeenohThread starterColumbia, SC · May 13, 2012#20
These are the before images for easy comparing to the build and after images. Nothing to exciting.

2 attachments not included in this copy

GolddeenohThread starterColumbia, SC · May 15, 2012#21
The parts came in, all that is left is the intake, exhaust, and scangauge II.

Garm was sneaky and hid some of my parts in with the front sway bar took me a sec to catch on.

That MI Crank Pulley is a sexy part, If I where only a Machine.

3 attachments not included in this copy

cali yarisCanoga Park, CA · May 15, 2012#22
crap, I meant to tell you that.

Picture not included in this copy
GolddeenohThread starterColumbia, SC · May 15, 2012#23
Well it was a long starter day but I got the Header, Crank Pulley and the Strut Tower Brace on. I was going to do it front to back but since I didn't get it all in today I went ahead and put on some of the harder items I have. I was going to put on the Front Sway Bar But I Don't have the Equipment to drop the cradle to do that so that will have to be done by someone with a shop(decided this after 3 hours of trying to get the OEM sway bar out).

I Notcied that my OEM header isn't the cramped looking style that I usually see people replacing.
When taking the OEM header out remove the heat shield to better access the bolts. I would then suggest getting under the car and taking the two spring bolt connecting the Mid-pipe and header out. while down there you may want to take the bolt out of the bracket on the side of the manifold. then precede to the bolts on the head besure to get the cable for the O2 sensor out of the way.


The Pulley is not only beautiful but you can easily feel the difference in weight. from what i gathered the pulley is supposed to be at 90ft pounds but it didn't even get to put that much on it to get the bolt out so it apears that it isn't even set to 90 factory so I will double check and see what it is supposed to be at, right now it is at 60ft/lbs.

6 attachments not included in this copy

GolddeenohThread starterColumbia, SC · May 15, 2012#24
oh look FEFWD doing a wheelie.

1 attachment not included in this copy

cali yarisCanoga Park, CA · May 15, 2012#25
^ hehe, yeah!

yes, the front sway bar is a PITA without a lift -- not that many bolts, but the subframe has to come down.

Pretty sure the pulley needs 90 ft/lbs. I wouldn't drive (hard) until you settle that.
GolddeenohThread starterColumbia, SC · May 15, 2012#26
yea it is 95ft'lbs, I'll have to get a friend to actually stop by to help with that.
skootdogBaton Rouge,La · May 15, 2012#27
Everything is coming together nicely! I was wondering if the bolt on the pulley was left handed threads or not? Mine should be here tomorrow or thursday and i would hate to go the wrong way and break the head. I also remember reading the DIY on a pulley install and they actually use some blue locktight when installing the new one.
GolddeenohThread starterColumbia, SC · May 15, 2012#28
it is normal thread. check the torque on it before you take it off, mine came lose really easily makes me wonder if it was as tight as it should have been or I am stronger than i thought i was.
skootdogBaton Rouge,La · May 15, 2012#29
You would think with little locktight and a real snug pull on the wrench that it be fine then Haha.
spocksleftballflorida · May 16, 2012#30
What is the point of the flywheel upgrade. I remember a thread about performance, but it seems a limited bonus like a cai.
eTiMaGoBangkok, Thailand · May 16, 2012#31
more responsive engine, much like with a lighter crank pulley
GolddeenohThread starterColumbia, SC · May 16, 2012#32
tied a rope through the pulley and to the lower control arm. as soon as it hit 90ft/lbs the rope snapped. now to do the grond wire and fog lights.
GolddeenohThread starterColumbia, SC · May 19, 2012#33
fog lights are functioning, the last 2 boxes arrived at 0930 so the intake and exhaust will go on tomorrow. can't wait to hear what it sounds like with all of that everything on.

I can hear the exhaust going through the header when I am under load, gets me a little excited :D
cali yarisCanoga Park, CA · May 19, 2012#34
What is the point of the flywheel upgrade. I remember a thread about performance, but it seems a limited bonus like a cai.
It's one of the best mods you can do on the Yaris to free up power it already makes. Ask Mazilla. Or me. Or try to find someone who installed one and is disappointed. 🙂
cali yarisCanoga Park, CA · May 19, 2012#35
way to go goldeenoh, "How to Completely Mod Your Yaris in ONE Weekend" -- 👏
tooterLos Angeles · May 19, 2012#36
Originally Posted by spocksleftball ↑
What is the point of the flywheel upgrade. I remember a thread about performance, but it seems a limited bonus like a cai.
When I was in auto shop in the "old days"...😉
...the front pulleys were called harmonic balancers. I was told that it was good for the crankshaft to have some rotating weight at both ends to help counter the twisting forces acting on it from being connected to a major load at only one end. The back weight being the flywheel. The load on the belts at the front also helps.

But they definitely do make the engine more responsive, just like they do on motorcycles.
packetraceQuebec · May 19, 2012#37
WOWW!!

I would really like to get all those stuff 😲😲😲😲
GolddeenohThread starterColumbia, SC · May 20, 2012#38
done sir done👍

2 attachments not included in this copy

why?harnett county NC · May 23, 2012#39
the best way to explain the flywheel is to compare it to the pulley.

Think of how much better the car feels after installing the pulley. Now imagine adding that much lightness again, and you will get what a lightweight flywheel will feel like.
GolddeenohThread starterColumbia, SC · Oct 25, 2012#40
had the front sway bar put on a few weeks ago, felt stiff in the steering at first but i got used to it so now i just corner faster.

got to change out the pulley on an alternator i scored on here so i changed the alternator out to take advantage of the NST lite weight alternator pulley that has been staring at me since May. zippy getting a little more zippy.
cali yarisCanoga Park, CA · Nov 8, 2012#41
zoom zoom!
GolddeenohThread starterColumbia, SC · Nov 8, 2012#42
I have just about got her to where i want her, but i will have to slow down a bit so that i can move and do some remodeling. just want better tires and rims, rear strut tower brace, rear spoiler, front spoiler and canards, CBF hood and hatch, intake manifold, upgraded connecting rods, high compression pistons, +1mm valves, jun cam, upgraded fuel system and i'm sure there is something else i am missing from that list.
GolddeenohThread starterColumbia, SC · Nov 8, 2012#43
quick i need more money to get more parts to be able to keep up with the wife mobile!!!
GolddeenohThread starterColumbia, SC · Nov 10, 2012#44
I'll see what I can do, might take me a little while, but everyone tells me that it is loud and my car sounds bigger than it is.