Yarisworld Archive

Exhaust Manifold cover

5 posts · 6,029 views

devinlamotheOriginal postSudbury, Canada · May 1, 2012#1
OK so I was getting this really annoying rattle and thought it was the throttle cable, so I tied that down - but after doing it, the rattle was still there.

Well today I found it was the exhaust manifold heat shield cover. The bottom 2 bolts are completely rusted off from the manifold so only the 2 top bolts are on, causing a rattle.

What's the best way to clamp it down? Wire? Weld it back?

Or can I run without this?

Replies 4

Klink10910 · May 1, 2012#2
You can run without it as people who have installed a header will attest.
devinlamotheThread starterSudbury, Canada · May 1, 2012#3
Originally Posted by Klink10 ↑
You can run without it as people who have installed a header will attest.
Good enough for me.

I tried to tie it down with copper wire but then I notice when I removed 1 of the top bolts half of one snapped off... screw that lol
ViperoniBrampton, ON · May 2, 2012#4
Originally Posted by devinlamothe ↑
Good enough for me.

I tried to tie it down with copper wire but then I notice when I removed 1 of the top bolts half of one snapped off... screw that lol
I've run mine coverless on my Echo since I bought the car 60k km's ago, no problems :)
mr_milesPortland, OR · May 2, 2012#5
took mine off also. extra weight! nonsense we don't need :p