zkarOriginal postGDL Mexico · Apr 9, 2012#1Hello,
I decided to use a set of 205/50R17 on my 2007's Yaris with stock suspension. Wheels are 17x7" ET 42'.
My problem is that when I turn at full, the front tire rubs on the inside face at the back.
I am considering spacers to solve the issue, but wonder if 5mm will be enough or if I should go all the way with 10mm.
Any comment/help? Thanks in advance!
Replies 15
zkarThread starterGDL Mexico · Apr 10, 2012#2OK, I got generic 10mm spacer and tried them on, looks that this will solve the rubbing issue, but now I will have to replace the studs.
Can any one let me know what are the correct studs I need?
Thanks!
zkarThread starterGDL Mexico · Apr 10, 2012#333OHDover, Ohio · Apr 10, 2012#4You will need 12x1.5 studs, and the ones you cited above are 12x1.5. So yes they should work.
Not sure what type of spacer you have, but if the studs aren't in the spacer itself you will need longer studs.
1.5Tampa · Apr 10, 2012#5I thought for 5/10mm spacers, studs werrn't necessary?
WeeYariGeorgetown, Ontario, Canada · Apr 10, 2012#65mm not necessary.
10mm absolutely necessary.
zkarThread starterGDL Mexico · Apr 10, 2012#7 Originally Posted by
33OH ↑ Not sure what type of spacer you have, but if the studs aren't in the spacer itself you will need longer studs.
Thanks 33OH,
Spacer I got didn't have the studs on it, they are just something like this
Picture not included in this copy So does the one at NAPA looks good in both ends?
Thanks!
33OHDover, Ohio · Apr 10, 2012#8 Originally Posted by
WeeYari ↑ 5mm not necessary.
10mm absolutely necessary.
This. Anything over 5mm (7mm at the MOST) you should really look into getting longer studs.
WeeYariGeorgetown, Ontario, Canada · Apr 10, 2012#9 Originally Posted by
zkar ↑
That is the same part# for the extended studs I got from NAPA to put 10mm spacers in my rear.
If the Yaris uses the same studs front and rear, then those will work.
1.5Tampa · Apr 10, 2012#10 Originally Posted by
33OH ↑ This. Anything over 5mm (7mm at the MOST) you should really look into getting longer studs.
Thanks for clarity
WeeYariGeorgetown, Ontario, Canada · Apr 10, 2012#11 Originally Posted by
1.5 ↑ Thanks for clarity
Yeah. 10mm on stock studs = 3 exposed stud threads. Not good.
33OHDover, Ohio · Apr 10, 2012#12 Originally Posted by
WeeYari ↑ That is the same part# for the extended studs I got from NAPA to put 10mm spacers in my rear.
If the Yaris uses the same studs front and rear, then those will work.
Yes, it does use the same studs. Thanks for checking that out. Yes - these will work!
CrankyOldManWest Michigan · Apr 10, 2012#13I'm more amazed that a Yaris with 25.1" wheels can even move! My 205/50R15's are slow compared to my skinny winter tires (175/70R14).
kimonaHuntington Bch, CA · Apr 10, 2012#14I run 16x7, ET42 with 205/50/16's and they rub the plastic fender liners at full lock... a maneuver I've made only a handful of times in the 5 years I've been running this size tyre. Nothing for concern here.
YaristeveLos Angeles · Apr 10, 2012#15 Originally Posted by
kimona ↑ I run 16x7, ET42 with 205/50/16's and they rub the plastic fender liners at full lock... a maneuver I've made only a handful of times in the 5 years I've been running this size tyre. Nothing for concern here.
Why not adjust the steering stop to prevent full lock? I know you will increase turning radius but you don' want to get the tight radius anyway since it will cause the tire to rub...
Oh, BTW, I was planning to go 16 X 7, 42ET with 195/50-15...
zkarThread starterGDL Mexico · Apr 12, 2012#16 Originally Posted by
33OH ↑ Yes, it does use the same studs. Thanks for checking that out. Yes - these will work!
Thank you both!🎉