Yarisworld Archive

headlights out! :(

7 posts · 5,402 views

bugg_masterOriginal postFresno, CA · Mar 20, 2012#1
hey u guys i need help...i was driving home in the country side with my high beam and my lights just went out(low beam + high beam out). just checked the fuses today but theyre fine so i think i might get some new fuses to switch them just in case but does anyone have any ideas or suggestions about what the cause of the problem is?

Replies 6

CTScottUSA, CT · Mar 20, 2012#2
There are two separate fuses for the two sides H-LP RH and H-LP LH.

Does the headlight icon light up on the cluster?
bugg_masterThread starterFresno, CA · Mar 21, 2012#3
Originally Posted by CTScott ↑
There are two separate fuses for the two sides H-LP RH and H-LP LH.

Does the headlight icon light up on the cluster?
hey ct the headlight icon actually does not come on :( i hope its not something bad
CTScottUSA, CT · Mar 21, 2012#4
Originally Posted by bugg_master ↑
hey ct the headlight icon actually does not come on :( i hope its not something bad
Check the ECU-B fuse in the under hood fuse panel.
bugg_masterThread starterFresno, CA · Mar 21, 2012#5
Originally Posted by CTScott ↑
Check the ECU-B fuse in the under hood fuse panel.
CT the high beam icon does not come on but the low beam icon works,I double checked it again, does this change anything?
CTScottUSA, CT · Mar 21, 2012#6
Originally Posted by bugg_master ↑
CT the high beam icon does not come on but the low beam icon works,I double checked it again, does this change anything?
The high beam indicator is separate from the headlights on indicator. The headlights on one is driven by the control side of the circuit and the high beam indicator is driven by power flowing through the bulbs, so if both bulbs were bad, that would be one possible explanation.
CTScottUSA, CT · Mar 21, 2012#7
Besides verifying that both bulbs aren't completely bad, check the H-LP/AMT Relay in the little box on the passenger side, under the hood. Have someone else turn the headlight switch on and off, while you listen closely for the relay to click as they do.