I am having wheel bearing replaced, i got the tie bar and control arm ball joint removed. Do i tap on the axle with nut to remove it. I hit it with plastic hammer, it doesnt move at all. ;(
How to Remove cv axle from passangerside
4 posts · 3,676 views
Replies 3
Are you having trouble getting it out of the tranny or having trouble getting the hub off of it?
Hub :)
Hmmm - When I changed the passenger axle on Crashy the hub slipping of the splines was the easy part. The service manual shows using the SST 09628-10011, which is basically a puller to remove it. With mine, I just tapped around the backside of the hub with a deadblow hammer until it slid loose.Originally Posted by yaris4062007 ↑Hub :)