Yarisworld Archive

ET38 or ET42

9 posts · 7,998 views

Dave55Original postNortheast Ohio USA · Mar 14, 2012#1
Found some wheels I like (MB Wheels Seven X), 15" x 6.5
Picture not included in this copy

with two options for offset 38mm or 42mm

As a complete newbie, I need the advice of the members of this forum.

What would be the difference between the two offsets?

The 42 is closer to the stock offset.
It seems the 38 would push the tire out more. But the 42 would keep the tire closer to its original location (relative to the bearings and suspension).

Why would you pick one over the other?
What about load on the bearings, etc.

And anyone have any experience with MB Wheels?

Thanks Again!

Replies 8

1.5Tampa · Mar 14, 2012#2
I would go with the 38. The offset is going to push the wheel closer to the outside of the fender. The 42mm offset is almost oem spec and at 6.5in wide, that is a ultra conservative set up. I would reccomend you go with the lower offset which will widen the stance, make it look better and improve performance. That set up is still very conservative and will have no negative impact on the car.
cali yarisCanoga Park, CA · Mar 14, 2012#3
Don't worry about the bearings. I run 15x9 all around and race at the track, never had a bearing go out. It's just not a valid issue.

+38mm will look better and you will have no rubbing with a 15 x 6.5 size wheel. You should go 15x7, but that's up to you.

MB is an economy wheel -- I haven't heard of an failing, but it might not last forever. You should email us and see if Jeff can match whatever deal you're getting. We do wheel and tire packages as well, and he will guide you to the perfect combination.

sales.microimage@gmail.com
================================
1.5Tampa · Mar 14, 2012#4
Originally Posted by cali yaris ↑
You should email us and see if Jeff can match whatever deal you're getting. We do wheel and tire packages as well, and he will guide you to the perfect combination.

sales.microimage@gmail.com
================================
^^^THIS

I just spoke to Jeff on the phone about wheel/tire setups the other day and he was extremely helpful and walked me through getting what I needed/wanted.
cali yarisCanoga Park, CA · Mar 14, 2012#5
Like this Buddy Club + 215 Kumho combination -- affordable, super light, no rubbing and sick!

I would have run this on my own car if I knew Jeff back then.

Picture not included in this copy
1.5Tampa · Mar 14, 2012#6
Actually just shot over an email concerning some more shoe upgrades lol
Dave55Thread starterNortheast Ohio USA · Mar 15, 2012#7
Thanks everybody for your help.
ttr125fan09corpus christi, texas · Mar 15, 2012#8
Please dont buy mb wheels, i work at discount tire where we sell ass loads of those, we all ways have people coming in for vibration checks and it is always a bent wheel, but i also live where the roads suck, so if you have decent roads youll be fine, but beware they aren't the best wheel in the world..
mazillaSan Jacinto California · Mar 15, 2012#9
Originally Posted by cali yaris ↑
Like this Buddy Club + 215 Kumho combination -- affordable, super light, no rubbing and sick!

I would have run this on my own car if I knew Jeff back then.

Picture not included in this copy

No rubbing?? 👏

I'm getting ready to switch up my tire/wheels...