I can't find it anywhere - am I missing it?! I know someone had to have done a write-up on this.... I need to do this install this weekend before I get lazy and put it off for another 18 months. Does anyone know where I can find the DIY? Pleaaaaaaaaaaaaaaaaaaaaaaaaaaase and thank you 😁
LED Ignition Light DIY
30 posts · 8,181 views
Replies 29
hmmm, I'm too lazy to search, but I could have sworn there was one here and possibly in the MI forums too.
Just for you Jinni, I stopped being lazy and searched ;)
http://www.microimageonline.com/foru...ll=1#post10356
http://www.microimageonline.com/foru...ll=1#post10356
I LOVE YOU !! Thank you :) :)
Oh hell. This is too much electrical for me :( I'm scared to death of electrical work, so I guess this is something I am going to have to get someone to do for me - this is where I tap out lol I thought it would be easier than that *sigh* Well, maybe I can get it done next weekend. :)
If you have a 2010, then it won't fit, due to the antenna coil for the transponder key.
Picture not included in this copy
Picture not included in this copy
1 attachment not included in this copy
Bring it down here and I'll hook it up for you if there's not someone closer.
SERIOUSLY?!?!? Ugh. I wish the site said that :( Does Garm know this? I know when I bought it, it didn't say it wouldn't fit the 2010 (I bought this with my badges the first week I got the 2010) so if it doesn't say that I'll let him know so he can add it to the page.Originally Posted by CTScott ↑If you have a 2010, then it won't fit, due to the antenna coil for the transponder key.
Attachment 45602
That was a waste of money :( Oh well, looks like it will be going on the for sale thread.
Thank you! But it looks like it won't fit :( So I'll be selling it. Booooo. 🙁Originally Posted by 47_MasoN_47 ↑Bring it down here and I'll hook it up for you if there's not someone closer.
Dang that's a huge shaft.
I don't remember when this discussion first happened, but I'm about 90% sure that someone tried it and it didn't fit since the ignition switch body is larger in diameter on the Yaris with the engine immobilizer.Originally Posted by J_Lynn ↑SERIOUSLY?!?!? Ugh. I wish the site said that :( Does Garm know this? I know when I bought it, it didn't say it wouldn't fit the 2010 (I bought this with my badges the first week I got the 2010) so if it doesn't say that I'll let him know so he can add it to the page.
That was a waste of money :( Oh well, looks like it will be going on the for sale thread.
slight modification to make it fit? if thats the case this wont fit any canadian yaris (cars sold here after 2004 require immobilizer)
Yeahhhh I see what you're saying, even with modification, it doesn't look like there is enough clearance for it. I guess this just sucks :(
Just to say I at least tried, I am going to go out and make sure that's the case. But since it's coming from you and you're 90% sure; I am already 99.9% I can trust that it won't fit LOL
Just to say I at least tried, I am going to go out and make sure that's the case. But since it's coming from you and you're 90% sure; I am already 99.9% I can trust that it won't fit LOL
It's actually on the last two pages of the DIY that Laz posted the link to; it doesn't fit. That sucks. I'm gonna ask Garm to put that up on the page so that no one else with the engine immobilizer buys it; it's only $39 - but that is almost 1/2 of what the foglights are, so I could have bought the foglights instead :P
see if garm will take a trade for the foglights for you.
Alright, so Scott said the difference between the ignitions was about 1mm - so I ran out, took the steering over off and tried it out; it didn't work. It is too small. *BUT*, do you think it's possible to snap off the piece surrounding the ignition and mount it somewhere else in the steering area and still have it work? Or does it *have* to be around the ignition itself for it to work as designed? I'm not sure really how that whole thing works, so it's a shot in the dark - but I figured I'd throw it out there.
Here's pictures of what it looks like:
Here's pictures of what it looks like:
4 attachments not included in this copy
It comes off ..... ok, this may work .... maybe ..... we shall see ....
............nope, it won't. lol
............nope, it won't. lol
Love ya too 😛Originally Posted by J_Lynn ↑I LOVE YOU !! Thank you :) :)
Sorry to see that it won't work. 🙁
Meh, its ok - you win some, you lose some. lol
That makes sense. The no engine immobilizer ones have a shoulder in the ignition switch body that the ring slides down onto.Originally Posted by J_Lynn ↑Alright, so Scott said the difference between the ignitions was about 1mm - so I ran out, took the steering over off and tried it out; it didn't work. It is too small. *BUT*, do you think it's possible to snap off the piece surrounding the ignition and mount it somewhere else in the steering area and still have it work? Or does it *have* to be around the ignition itself for it to work as designed? I'm not sure really how that whole thing works, so it's a shot in the dark - but I figured I'd throw it out there.
Here's pictures of what it looks like:
This is coming from someone that still hasn't put a lot of skill points into automotive work, but could you swap the ignition switch for one from an 09?
No. The engine immobilizer is a function of the ECM (it needs to see a response from the transponder in the key to allow the engine to start), so you really can't change the keyswitch without changing the ECM as well.Originally Posted by 47_MasoN_47 ↑This is coming from someone that still hasn't put a lot of skill points into automotive work, but could you swap the ignition switch for one from an 09?
Shaft.
great movie.Originally Posted by 47_MasoN_47 ↑Shaft.
you could also get a duplicate key made
regular metal non immobilizer
remove the pickup ring and relocate and tape (if you still have the valet) immobilizer key to it and tuck in column cover
i removed the chip from my valet and siliconed it to the ring
$6 metal key compared to $60 for original
regular metal non immobilizer
remove the pickup ring and relocate and tape (if you still have the valet) immobilizer key to it and tuck in column cover
i removed the chip from my valet and siliconed it to the ring
$6 metal key compared to $60 for original
That's a pretty sweet idea.Originally Posted by OTA'sTOY ↑you could also get a duplicate key made
regular metal non immobilizer
remove the pickup ring and relocate and tape (if you still have the valet) immobilizer key to it and tuck in column cover
i removed the chip from my valet and siliconed it to the ring
$6 metal key compared to $60 for original
That is a sweet idea. But way too advanced for me, I don't take risks with stuff like that because I don't want to mess something up and not be able to fix it :)
If it's not broke, fix it until it is broke :)
There are still a bunch of pieces of my interior in my closet somewhere that haven't been on in nearly a year because I'm always dinkering around with the wiring in my car.
There are still a bunch of pieces of my interior in my closet somewhere that haven't been on in nearly a year because I'm always dinkering around with the wiring in my car.
here's a pic of where i siliconed the chip on the pickup ring
if anyone was interested in
Picture not included in this copy
if anyone was interested in
Picture not included in this copy