tyrone_yarisOriginal postKarachi, Pakistan · Feb 13, 2012#1Hello,
Just wondering, is it possible to disable the airbag deployment in for the passenger / driver. In case we need to put in a baby seat or for any emergency?
Would appreciate how to if possible.
Tyrone
Replies 11
bronsinnj · Feb 13, 2012#2Look in your owners manual.
I believe there is a switch designed to do just that.
CTScottUSA, CT · Feb 13, 2012#3The Yaris doesn't have a switch as some vehicles do. MicroImage sells a device that I developed that allows you to arm or disarm the passenger airbag. I developed it for people running aftermarket seats, but it would work for this purpose as well:
http://shop.microimageonline.com/Air...?categoryId=-1 tyrone_yarisThread starterKarachi, Pakistan · Feb 14, 2012#4Thanks
Bronsin the owners manual I have is in Japanese 😕. Its a Jap import.
CTScott I dont think we have that switch here :) I remember the older models 2004 that I had, had a type of connecter called SRS in the engine bay but nothign of that sort here.
BluYrsTallinn, Estonia · Feb 14, 2012#5Mine has the switch (you operate it with the key) for the passenger seat as standard (IMHO all EU market Yarii do). If you're in doubt, just open the passenger door and look at the side of the dash that goes against the door trim.
I found a pic, it's right below the warning sticker. tyrone_yarisThread starterKarachi, Pakistan · Feb 14, 2012#6Thanks for helping BluYrs. I checked but I dont have that option on the dash. Maybe the Japs dont allow it in their country 😕
CTScottUSA, CT · Feb 14, 2012#7 Originally Posted by
tyrone_yaris ↑ Thanks
Bronsin the owners manual I have is in Japanese 😕. Its a Jap import.
CTScott I dont think we have that switch here :) I remember the older models 2004 that I had, had a type of connecter called SRS in the engine bay but nothing of that sort here.
I just checked the Japanese EWDs. Your car does not have a switch and it does have the weight sensors under the passenger seat with the occupant classification ECU mounted under the front edge of the passenger seat (like the US ones do).
Unfortunately the occupant classification ECU has a different connector than the one on the US Yaris do, so the MicroImage module would not work with your car.
tyrone_yarisThread starterKarachi, Pakistan · Feb 15, 2012#8 Originally Posted by
CTScott ↑ I just checked the Japanese EWDs. Your car does not have a switch and it does have the weight sensors under the passenger seat with the occupant classification ECU mounted under the front edge of the passenger seat (like the US ones do).
Unfortunately the occupant classification ECU has a different connector than the one on the US Yaris do, so the MicroImage module would not work with your car.
What's EWD? Pls forgive my ignorance 😳 So that means there's no way to disable the airbags in the Jap models??
CTScottUSA, CT · Feb 15, 2012#9 Originally Posted by
tyrone_yaris ↑ What's EWD? Pls forgive my ignorance 😳 So that means there's no way to disable the airbags in the Jap models??
EWD = Electrical Wiring Diagrams.
Correct, at this point there is not really a way to disable it on your car.
bronsinnj · Feb 15, 2012#10So...you cant disable the passanger airbag when installing a child seat in the passangter seat?
With all the flap about kids getting killed by airbags it would seem Mother Toyota would have something for that?
tyrone_yarisThread starterKarachi, Pakistan · Feb 15, 2012#11Thanks CTScott
CTScottUSA, CT · Feb 15, 2012#12 Originally Posted by
bronsin ↑ So...you cant disable the passanger airbag when installing a child seat in the passangter seat?
With all the flap about kids getting killed by airbags it would seem Mother Toyota would have something for that?
Indeed - She has a disclaimer in the owners manual, which says that car seats are to be installed in the rear seat. Also, the occupant classification system prevents the airbag from deploying if the passenger weighs too little.