Yarisworld Archive

Lower front skidplates

19 posts · 6,122 views

mr_milesOriginal postPortland, OR · Feb 4, 2012#1
can someone take a photo or two of the bottom engine skid-plates for me? I'm missing mine and would like to know what i'm looking at before i go buy something I cant use.

Replies 18

CTScottUSA, CT · Feb 4, 2012#2
Here's a pic from under the front of my 09. I think you are talking about the two overlapping plastic panels across the front?

Picture not included in this copy

1 attachment not included in this copy

mr_milesThread starterPortland, OR · Feb 4, 2012#3
yep! I found those online but since I'd never seen them on a car before I wasn't quite sure if they were correct. thanks a bunch!
weedtankCA · Feb 4, 2012#4
@ctscott sweet drain valve. i have them on all my cars!
CTScottUSA, CT · Feb 4, 2012#5
Originally Posted by weedtank ↑
@ctscott sweet drain valve. i have them on all my cars!
Me too. I learned about them from someone on here and since have put them on everything I own.
cruzerbotzCharlotte, NC · Feb 4, 2012#6
What's the brass fitting at the oil drain? How does it work?

Thanks,
CTScottUSA, CT · Feb 4, 2012#7
Originally Posted by cruzerbotz ↑
What's the brass fitting at the oil drain? How does it work?

Thanks,
It's a Fumoto oil drain valve. During an oil change you install it in place of the drain bolt. From that point forward you simply push and then turn the locking lever on the ball valve to drain the oil (without getting a drop on your hands).

http://www.fumotousa.com/faq.htm
mr_milesThread starterPortland, OR · Feb 4, 2012#8
Those are damn smart, lol. May have to invest in one!
AltitudeColorado · Feb 4, 2012#9
Originally Posted by mr_miles ↑
Those are damn smart, lol. May have to invest in one!
If only MI carried them...or do they?
CTScottUSA, CT · Feb 4, 2012#10
Originally Posted by Altitude ↑
If only MI carried them...or do they?
Garm currently doesn't, but perhaps this discussion will persuade him to.
goliath1812Ocala Florida · Feb 4, 2012#11
I'd buy one.
SpidermandudJohnson City, Tennessee · Feb 5, 2012#12
^same
fnkngrvIn The Hotbox · Feb 5, 2012#13
Just be cognizant of the fact that it does stick out about 1/2" lower than the stock plug. This might not sound like much, but if you are lowered or intend to go lowered it could be something to remember as it is possible that you could rub it going over something. Might not be an issue, but thought that I would put it out there. This is my first winter where I didn't remove my dropped springs and let me tell you that with 15" wheels I am constantly skipping off my undercarriage and exhaust system as an example.
SpidermandudJohnson City, Tennessee · Feb 5, 2012#14
What about in combination with one of Garm's mysteriously elusive underpanel kits? (#1 on my list of things I want for the Yaris.) I haven't seen any pics of the underpanel installed on any Yari, but would you assume it would help prevent that at all?
AltitudeColorado · Feb 5, 2012#15
Originally Posted by Spidermandud ↑
What about in combination with one of Garm's mysteriously elusive underpanel kits? (#1 on my list of things I want for the Yaris.) I haven't seen any pics of the underpanel installed on any Yari, but would you assume it would help prevent that at all?
I've got the under panel and yes it covers the entire underside of the engine. No worries with a modified drain plug.
SpidermandudJohnson City, Tennessee · Feb 5, 2012#16
Sweet action.
Betriventedmonton · Feb 5, 2012#17
Garm, get in on this.
pennyracergrants pass · Feb 6, 2012#18
what size is the oil drain plug on the lb ? going to buy one soon as i find out what size i need
CTScottUSA, CT · Feb 6, 2012#19
Originally Posted by pennyracer ↑
what size is the oil drain plug on the lb ? going to buy one soon as i find out what size i need


12mm-1.25, which is the Fumoto model number F-103