Yarisworld Archive

Feeler: Depo Projector Lights w/Halos (incl. HIDs)

22 posts · 6,664 views

BetriventOriginal postedmonton · Feb 3, 2012#1
Alright guys, this time I'm actually selling them. They've been used for about.. I think a year and a half. Condition is still perfect (except, as I've shown in one photo, some adhesive is still stuck to the surface of it. Wax and grease remover will get rid of it), with normal wear. Cheesy as it sounds, I'd rate them at LEAST 8/10. They are Chrome, unfortunately. I got them in Chrome specifically because they didn't look too aftermarket - as a result I've had literally zero problems with police or motor vehicle inspectors with regards to the lights. They will come with an HID kit fully wired in, and is plug and play. I will not separate them, because of the way I've wired them it's hard to de-integrate them.

I can ship these out any day now, you just pay shipping on top of the price. Keep in mind the box they come in (and came in, these are the original box(es)), are/is rather large, and heavy ish. Shipping may be a bit of a B.


Pics:
Picture not included in this copy
Picture not included in this copy

Here's another shot of the lights, this may be better since it's in natural lighting:
Picture not included in this copy

Here's the cutoff:
Picture not included in this copy

Here is the adhesive:

Picture not included in this copy


EYELIDS NOT INCLUDED.

100 + shipping

Replies 21

marcustoronto, canada · Feb 3, 2012#2
hows the cut off..got any photos..
BetriventThread starteredmonton · Feb 3, 2012#3
I can get some later. Also, sorry for the photos, they SHOULD resize soon. The cutoffs kind of slope up on the right
marcustoronto, canada · Feb 3, 2012#4
i been contemplating on this wanted to get barber's retro but it seems to me that i may be trading the ride soon for auto... i need all my oem stuff. argh!!!!
33OHDover, Ohio · Feb 3, 2012#5
What colour HID kit?
BetriventThread starteredmonton · Feb 3, 2012#6
5000k
marcustoronto, canada · Feb 3, 2012#7
so whats ur cost im sure people are wondering??
BetriventThread starteredmonton · Feb 3, 2012#8
My bad, forgot to add it. 180 + shipping
BetriventThread starteredmonton · Feb 5, 2012#9
Bump. Nobody? I can have it off my car and shipped in a day.
yaris2010RSAngus, Ontario · Feb 5, 2012#10
bumb, looks very sharp on your car, i wish they didnt change the headlights for 09+

as for the "complaint" u stated in the origional post, that is a normal issue when using the "normal" type of HID kit, i believe its the bi-xenon HID kits use a wire from the drivers side to the passanger side to eliminate this issue.

also we are still waiting for cutoff pictures
BetriventThread starteredmonton · Feb 5, 2012#11
oh crap, that's right. I'll get them tomorrow. I should have snapped a pic earlier when I was driving.
menzEgypt · Feb 5, 2012#12
I wanted some help with HID. I have installed HID but not projectors or anything, so I am hating the glare from it. From what I understood that I need projectors so any help with that would be great. What kind of projectors do I need to use, how much, and what other stuff do i need to buy and of course a DIY :D. Well i am kinda new to this, so any help would be great. I tried to start a thread about it but I do not know how to. I asked my friends about the projectors here in my country, but the told me that the people who adds projectors to headlights do not know how to adjust them, I really have not understood what was the idea.
BetriventThread starteredmonton · Feb 5, 2012#13
Originally Posted by menz ↑
I wanted some help with HID. I have installed HID but not projectors or anything, so I am hating the glare from it. From what I understood that I need projectors so any help with that would be great. What kind of projectors do I need to use, how much, and what other stuff do i need to buy and of course a DIY :D. Well i am kinda new to this, so any help would be great. I tried to start a thread about it but I do not know how to. I asked my friends about the projectors here in my country, but the told me that the people who adds projectors to headlights do not know how to adjust them, I really have not understood what was the idea.
Projectors aim the light. What you've done is use the car's stock REFLECTOR housing to use HIDs, which scatters the light everywhere. Projectors are easy to adjust generally.

BACK ON TOPIC I have added the cutoff picture
yaris2010RSAngus, Ontario · Feb 5, 2012#14
VERY nice cutoff
Sari_YVancouver, BC · Feb 6, 2012#15
Sending you a PM
BetriventThread starteredmonton · Feb 6, 2012#16
Got it and replied
Sari_YVancouver, BC · Feb 6, 2012#17
Nm just reread your orig post
BetriventThread starteredmonton · Feb 8, 2012#18
Buump. I can have these shipped in a day..
BetriventThread starteredmonton · Dec 10, 2012#19
Alright guys, for sale again.
Gearheadb6California · Dec 15, 2012#20
Price+shipping to valencia ca 91354
RonVancouver · Dec 15, 2012#21
Hi, I'm interested.

Can you tell me how you've wired these up to work? The halo's for DRL or corner lights? HID for regular beam, and high beams?
BetriventThread starteredmonton · Dec 17, 2012#22
Sorry guys I've been away for the weekend. They're wired up to work with the car's stock harness. There's a three prong plug that you plug these right into which control both the hi and lo beams. I do need to warn you that the car's harness is not meant to split up hi and lo into two separate bulbs, as this does, so it doesn't function very well.

The halos are not the DRLs, they are nowhere near bright enough to function as any sort of light. I never actually used them, or the three other LEDs in the housing. For DRLs I had previously wired up my fog lights separate from my headlights, so I used those instead. The hi beams are a regualr H1 bulb.